SPINNAKER HUll Series User manual

HULL COLLECTION SP-5059
MINUTE
HAND
DATE
HOUR
HAND
1 2 3
AUTOMATIC 3 HANDS WITH DATE
CROWN

[3]
[1]
[2]
[1]
HOW TO SET THE TIME
1. To unscrew the crown, turn the crown anti-clockwise
until it turns freely without tension.
2. Pull out the crown to position [3].
3. Turn the crown to set the correct time.
4. Set to the correct time.
5. Push the crown back into position [1].
6. To screw the crown, push the crown all theway in (towards
the watch) then begintoturn clockwise until it issecurely
screwed down.
HOW TO SET THE DATE
1. To unscrew the crown, turn the crown anti-clockwise
until it turns freely without tension.
2. Pull out the crown to position [2].
3. Turn the crown anti-clockwise to set the date.
4. Set the correct time.
5. Push the crown back into position [1].
6. To screw the crown, push the crown all theway in (towards
the watch) then begintoturn clockwise until it issecurely
screwed down.
NOTE:
* Do not set the date between 9:00 P.M. and 4:00 A.M.
* This watch MUST be worn for at least 8 (Eight) hours each day to ensure it is fully wound. An automatic watch will only wind when the
watch is on your wrist and your arm moves. Winding the watch by the crown will put power on the spring but not enough to allow the
watch to function fully. If your watch stops overnight or loses time it means it is not being fully wound.
* Failure to SECURELY screw down the crown after setting the watch may affect its water resistance.