Spirit Medical Systems Group MT200 User manual

Rehabilitation Treadmill
MT200
USER’S MANUAL
PLEASE READ THIS ENTIRE MANUAL CAREFULLY BEFORE OPERATING YOUR NEW TREADMILL AND
SAVE IT FOR FUTURE USE.

MT200
1
Product Registration…………………………………………………………………………. 2
Important Safety Instructions………………………………………………………………… 3
Important Electrical Information……………………………………………………………… 4
Important Operation Instructions…………………………………………………………….. 4
Features……………………………………………………………………………………….. 5
Operation of Your New Treadmill……………………………………………………….…… 9
MT200 Assembly Instructions………………………………………………………………. 21
MT200 Drawing & Parts List………………………………………………………………… 29
Maintenance…………………………………………………………………………………… 27
Maintenance Software Mode………………………………………………………………… 35
Specifications………………………………………………………………………………….. 37
Table of Contents

MT200
2
Thank you for your recent purchase of this high quality physical rehabilitation treadmill, the MT200,
from Spirit Medical Systems Group.
Your new product was manufactured by one of the leading fitness and medical products
manufacturers in the world. Further, it is backed by one of the most comprehensive warranties in
the industry. Through our dealers, distributors and manufacturer’s representatives, we will do all
we can to provide many years of successful and prosperous ownership. Your warranty and service
needs will be addressed collaboratively through your regional sales representative and our highly
trained service technicians.
The responsibility of that collaborative team is to provide you with both the technical knowledge
and access to service personnel to make your ownership experience more informed, and
resolution of any difficulties easier to remedy.
Two components of the Spirit Medical Systems Group’s mission statement are “enhancing patient
outcomes and improving effectiveness in the delivery of services”. This is just one of the many
products that will assist you in providing that care to your patients and/or clients.
Please take a moment at this time to record the name of the dealer, distributor, or
manufacturer’s representative, their telephone number, and the date of purchase below to
make any future, needed contact easy. We appreciate your support and we will always
remember that you are the reason that we are in business.
Please complete and mail your registration card today and enjoy your new MT200 treadmill.
Yours in Health and Wellness,
Spirit Medical Systems Group
RECORD YOUR SERIAL NUMBER
Please record the Serial Number of this fitness product in the space provided below. You can
find the serial number on a sticker that is located on the front of the treadmill.
Serial Number_______________________________________
Product Registration

MT200
3
ATTENTION - Read all instructions in this manual before using this device.
DANGER - To reduce the risk of electric shock disconnect your treadmill from the
electrical outlet prior to cleaning and/or service work.
WARNING - To reduce the risk of burns, fire, electric shock, or injury to persons, install
the treadmill on a flat level surface with access to a 220~240 volt AC, 50 Hz, 10-amp
grounded outlet. Do not use an extension cord unless it is 14awg or larger, with only
one outlet on the end. The treadmill should be the only appliance in the electrical circuit.
Do not attempt to disable the grounded plug by using improper adapters, or in any way
modify the cord set; a serious shock or fire hazard may result along with computer
malfunctions.
 Use this device only for it’s intended use as described in this manual.
 Keep children away from the treadmill. There are moving parts, obvious pinch points and
other caution areas that can cause harm.
 Except as instructed for use of the device, keep hands away from all moving parts.
 Keep the electrical cord away from heated surfaces and out of all travel lanes and do not
operate the treadmill if the cord or plug is damaged.
 Never drop or insert any object into any openings.
 Do not use outdoors.
 To disconnect, turn all controls to the off position then remove the plug from the outlet.
 This device is designed for commercial use and will meet the demands of orthopedic, sports
wellness and general conditioning programs.
 Do not attempt to use your treadmill for any purpose other than for the purpose it is
intended.
 The pulse sensors are not medical devices. Various factors, including the user’s movement,
may affect the accuracy of heart rate readings. The pulse sensors are intended only as
exercise aids in determining heart rate trends in general.
 WARNING: Heart rate monitoring system may be inaccurate. Over exercise may result in
injury or death. If you feel faint stop exercising immediately.
 Ensure there is a minimum space on the sides of the treadmill of two feet for proper operation,
easy access and to prevent possible injuries to others standing or walking nearby. There should
be a minimum of at least one foot of free space at the front and three and a half feet at the rear.
 Do not use any after market parts on this device, other than those recommended by Spirit.
 Do not attempt any servicing or adjustments other than those described in this manual. All
else must be left to trained service personnel familiar with electro-mechanical equipment and
authorized under the laws of the country in question to carry out maintenance and repair
work.
 Hold the handlebar for support when getting on or off the treadmill.
 To avoid injury please observe all minimum and maximum adjustment settings.
 Wear proper shoes. High heels, dress shoes, sandals or bare feet are not suitable for use on
the treadmill. Quality athletic shoes are recommended to avoid leg fatigue.
 A safety tether cord is provided with this unit. It is a simple magnetic design that should be
used at all times. It is for your safety should you fall or move too far back on the tread-belt.
Pulling this safety tether cord will stop tread-belt movement.
Important Safety Instructions

MT200
4
WARNING!
NEVER remove any cover without first disconnecting AC power. If voltage varies by ten percent
(10%) or more, the performance of your treadmill may be affected. Such conditions are not
covered under your warranty. If you suspect the voltage is low, contact your local power
company or a licensed electrician for proper testing. Operating nominal power is 220~240 volt
AC, 50 Hz, 10-amp.
NEVER expose this treadmill to rain or moisture. This product is NOT designed for use
outdoors, near a pool or spa, or in any other high humidity environment. The temperature
specification is 40 degrees c (104 deg f), and humidity is 95%, non-condensing (no water
drops forming on surfaces).
This product must be grounded. In the unlikely event that the treadmill’s electrical system
should malfunction or breakdown grounding provides a path of least resistance for electric
current, reducing the risk of electric shock. This product is equipped with a cord having an
equipment-grounding plug. The plug must be plugged into an appropriate outlet that is properly
installed and grounded in accordance with all local codes and ordinances.
DANGER - Improper connection of the equipment-grounding conductor can result in a
risk of electric shock. Check with a qualified electrician or serviceman if you are in
doubt as to whether the product is properly grounded. Do not modify the plug provided
with the product if it will not fit the outlet; have a proper outlet installed by a qualified
electrician.
● NEVER use the treadmill during an electrical storm. Surges may occur in your facility
power supply that could damage the treadmill’s components.
● All users should have medical clearance before starting any rigorous exercise program.
● Start the user at a safe exercise level. Do not allow the user to be over exerted.
Symptoms to watch for, but not limited to, are: Shortness of breath or difficulty in breathing,
pain or discomfort, feeling faint.
● Make sure the user warms up and cools down properly to avoid over taxing the cardio
vascular system. Allow three to five minutes of warm up and cool down during each
exercise session.
Important Electrical Information
Important Operation Instructions
Grounding Instructions