Sportsman SSADJWT User manual

SSADJWT
Stainless Steel Adjustable Table w/Casters
Assembly Instructions
Max Weight Capacity = 220 Lbs
READ ALL INSTRUCTIONS AND WARNINGS BEFORE USING THIS PRODUCT.
This manual provides important information on proper operation & maintenance. Every effort has been
made to ensure the accuracy of this manual. These instructions are not meant to cover every possible
condition and situation that may occur. We reserve the right to change this product at any time without
prior notice.
IF THERE IS ANY QUESTION ABOUT A CONDITION BEING SAFE OR UNSAFE,
DO NOT USE THIS PRODUCT!
HAVE QUESTIONS? CONTACT US FIRST BEFORE CONTACTING THE RETAILER.
If you experience a problem, have questions or need parts for this product, visit our website
http://www.sportsmanseriesbrand.com or call Customer Service at 1-636-532-9888, Monday-Friday,
8 AM - 4 PM Central Time. A copy of the sales receipt is required.
KEEP MANUAL, SALES RECEIPT & APPLICABLE WARRANTY FOR REFERENCE
PARTS LIST
Check all packaging materials for
any small parts that may have
come loose during shipping.
Before assembly, locate and
identify all parts.
Hex Key
Spanner
1
1
Table Top
Upper Bracket
Down Bracket
Bottom Base
Bottom Rail
1
2
2
2
1
Support Bar
Support box
Castor
M8 Screw
Wing
Screw
M8 Nut
M5 Screw
Washer
2
2
4
14
2
4
8
6

Fig 3
Fig 5
Fig 2
Fig 1
Fig 4
Fig 6
Fig 7
ASSEMBLY INSTRUCTION
WARNING: BE PREPARED FOR TEAM LIFT WHEN ASSEMBLING/MOVING HEAVY TABLE.
WARNING: SHARP EDGES CAN CAUSE INJURY. USE CAUTION WHEN
ASSEMBLING/MOVING TABLE.
WARNING: DO NOT SIT OR STAND ON TABLE OR SHELF.
WARNING: MAKE SURE CASTERS ARE IN LOCKED POSITION BEFORE USE.
1. Place the table top on it’s face on the floor.
2. Insert the Upper Brackets into the square tubes situated at each side of the Table Top, screw
them together using M8 screws and Nuts.［Fig.1,2］
3. Insert the Down Brackets into the Upper Brackets. (Pull out the Locking Pin before
inserting)［Fig.3］
4. Fix the Bottom Support rail using Down Brackets and M8 screws, and then fix two Support Bars at
their corner using M5 screws. ［Fig.4］
5. Fix the bottom bases to Down Bracket by Support Boxes and M8 screws and washers.［Fig.5］
6. Screw the castors into the corner of Bottom Bases, and then stand upright. ［Fig.6］
7. Adjust the table to suitable height, and lock it using the locking pin and wing screws. ［Fig.7］.
Safety Tips
·Use caution when cleaning or handling to prevent risk of injury from exposed metal edges.
·Do not overload the table or shelf.
Cleaning
·Before use, remove protective film then clean the table.
·Clean the table using a cleaning agent suitable for use with stainless steel and galvanized surfaces.
·Always remove cleaning agent residues, as this can discolor the surface.
·Never leave any surface damp as this may cause discoloration. Wipe dry thoroughly.
201712