Sportsman SSWTWC48 User manual

SSWTWC36, SSWTWC48,
SSWTWC60, SSWTWC72
Stainless Steel Work Table w/Casters
Assembly Instructions
Max Weight Capacity = 330 Lbs
READ ALL INSTRUCTIONS AND WARNINGS BEFORE USING THIS PRODUCT.
This manual provides important information on proper operation & maintenance. Every effort has been
made to ensure the accuracy of this manual. These instructions are not meant to cover every possible
condition and situation that may occur. We reserve the right to change this product at any time without
prior notice.
IF THERE IS ANY QUESTION ABOUT A CONDITION BEING SAFE OR UNSAFE,
DO NOT USE THIS PRODUCT!
DO NOT RETURN THIS PRODUCT TO THE RETAILER - CONTACT CUSTOMER SERVICE.
If you experience a problem, have questions or need parts for this product, visit our website
http://www.sportsmanseriesbrand.com or call Customer Service at 1-888-287-6981, Monday-Friday,
8 AM - 4 PM Central Time. A copy of the sales receipt is required.
KEEP MANUAL, SALES RECEIPT & APPLICABLE WARRANTY FOR REFERENCE
PARTS LIST
Check all packaging materials for
any small parts that may have come
loose during shipping.
Before assembly, locate and identify
all parts.
Table Top - 1 Piece
Under Shelf - 1 Piece
Legs - 4 Pieces
Set Screws - 16 Pieces
Hex Key - 1 Piece
3 Inch Castors - 4 Pieces

Fig 3
Fig 5
Fig 2
Fig 1
Fig 4
Fig 6
Fig 7
Fig 8
ASSEMBLY INSTRUCTION
WARNING: BE PREPARED FOR TEAM LIFT WHEN ASSEMBLING/MOVING HEAVY TABLE.
WARNING: SHARP EDGES CAN CAUSE INJURY. USE CAUTION WHEN
ASSEMBLING/MOVING TABLE.
WARNING: DO NOT SIT OR STAND ON TABLE OR SHELF.
WARNING: MAKE SURE CASTERS ARE IN LOCKED POSITION BEFORE USE.
1. Place the under shelf on it’s side on the floor.
2. One by one, insert each leg into the corner socket of the under shelf［Fig.1］
3. Use set screws to loosely attach the under shelf to the legs, approx. 7 inches from floor.［Fig.2］
4. Screw the castors into the end of legs ［Fig.3］, then stand upright［Fig.4］
5. Position the table top onto the legs, ensuring each leg is firmly located in its corresponding corner
socket of the table top.［Fig.5］
6. Attach the table top using set screws. Ensure the table top is level and securely fixed.［Fig.6］
7. Securely tighten all set screws before use.
8. Lift the lever up to unlock the casters for transport ［Fig.7］, then press the lever down to lock the
casters during use ［Fig.8］.
Safety Tips
·Use caution when cleaning or handling to prevent risk of injury from exposed metal edges.
·Do not overload the table or shelf.
Cleaning
·Before use, remove protective film then clean the table.
·Clean the table using a cleaning agent suitable for use with stainless steel and galvanized surfaces.
·Always remove cleaning agent residues, as this can discolor the surface.
·Never leave any surface damp as this may cause discoloration. Wipe dry thoroughly.
201903