TVILUM Circo Kids 242-17-9388 User manual

A
DPCI # 242 - 17 - 9389 (Chocolate)
92270
Circo Kids
5 Drawer Dresser
DPCI # 242 - 17 - 9388 (White)
>> assembly instructions
1

FREE!
WEWILLHELPYOU!
Do not go back to your store!
Missing or Damage Parts? Have Questions about Assembly?
The store where you made this purchase does not stock parts for this item.
If you needs parts (damaged or missing) or have questions about assembly,
please call our toll free support line or email us. All orders normally ship within 24
hours. All Parts and Shipping are FREE!
Toll Free Customer Support 1-800-932-2006
Monday – Friday from 8 am to 5 pm EST.
E-mail: [email protected]om
Order parts anytime or download assembly
instructions through our website at www.tvilum.com
2

room in no time. Good luck - though we're confident you won't need it.
before you begin
tools needed
All you need to do is follow our simple instructions and you'll be on your way to transforming your
Congratulations on your latest Target purchase
Don't start sweating over this box of parts. This will be easy. We did the hard work for you.
Check for damaged or missing parts. Please call 1-855-MYTGTHOME (855-698-4846) for parts and service. Please reference DPCI#1.
242 - 17 - 9388 (White)
242 - 17 - 9389 (Chocolate)
Use the carton as a worksurface to prevent product damage during assembly.2. Sort hardware.3. Gather all tools prior to assembly.4.
3

2
table of contents
QUESTIONS? Just call 1-855-MYTGTHOME (855-698-4846) for parts and service. For faster service, have the style number and DPCI number ready when calling.
3
5
6 - 7
8
9 - 32
33
34
35
36
customer service information
introduction
parts list
hardware
how to use the cam lock system
assembly
specification sheet
questionnaire
information sheet
products available
4

FC
FB
G
LA
KA
IC
FC
UA
GA
IA HB
09405
IC
K
K
K
G
00594
02847 00595
IB
E
02843
06037
00594
06044
00595
EA
right drawer side
ITEM DESCRIPTION QUANTITY
left drawer side
drawer back small
drawer back large
drawer bottom small
drawer bottom large
back panel
drawer front small
drawer front large
left side
spacer
divider top
divider bottom
right side
left bottom rail
right bottom rail
back bottom rail
top rail
center rail
top panel
shelf 1
1
1
3
2
1
1
1
1
2
2
1
2
3
1
2
3
2
3
5
5
00594
00595
02843
02847
06037
06044
09405
E
EA
FB
FC
G
GA
HB
IA
IB
IC
K
KA
LA
UA
5

x40
20228
x25
20203
x10
20212
x22
31686
x1
25259
x2
31418
x4
21839
x5
25483
x8
10401
x10
26214
x16
26020
x14
26085
x38
31570
x5
25610
x20
31685
hardware
drawer knob screw
small dowel pin drawer fastener drawer glide spacerlarge dowel pin
long system screw
cam boltdrawer glide screw
large cam
short system screwconnector bolt
double cam bolt
leg screw
panel clip
small cam
6

x10
41407
x2
94009
x1
88060
x1
65806
x1
97642
x5
81039
x4
63001
drawer knob
leg
drawer glide
warning label
floor glide
hardware
wall attachment strap allen wrench
7

CORRECT
NOT
CORRECT
5
180°
123
46
how to use the cam lock system
8

x20
31685
x20
31570
small cam
CORRECT NOT
CORRECT
cam bolt
step 1 drawer assembly - insert cams
Screw cam bolts into the drawer fronts E + EA, cam bolts must be screwed down flush.1. Place the small cams into the large holes on the drawer sides 00594 + 00595, so that2. the arrow is facing the edge of the drawer side.
E
00594
x 5
x 3
00595
x 2
EA
9

paper
step 2 drawer assembly - attach drawer bottom to back
Press the drawer bottom 06037 and 06044 (with the finished side up) into the grooves on the drawer1. back 02843 and 02847.
Paper overlays the slot, but it has a slit so drawer bottom inserts well.2. Repeat these steps for all drawers.3.
x2
finished side up
finished side up
06044
x3
02847
02843
06037
10

x40
20228
drawer fastener
step 3 drawer assembly - attach drawer sides
Align holes at back of the drawer sides, 00582 and 00583 with the holes on the1. drawer back 02843 and 02847. Make sure the groove on the drawer back is facing
the inside of the drawer. Tap drawer fasteners into place with a hammer.
Repeat these steps for all drawers.2.
x2
00594
x3
02847
finished side up
02843
06044
06037
00595
00595
00594
finished side up
11

step 4 drawer assembly - attach drawer front
Place the cam bolts that are attached to the drawer fronts into the holes on the drawer1. sides.
Make sure the drawer bottom is completely inserted into the grooves in the drawer front2. and drawer back, then tighten cams.
00594
x3
06037
06044
06044
00595
00594
00595
EA
E
06037
x2
12

x1
88060
x5
81039
x5
25483
step 5 drawer assembly - attach drawer knob and warning label
Attach warning label to the inside of the drawer side. Only in one drawer.1. Use the drawer knob screws to attach the drawer knob to the drawer front E and EA.2.
x2
00594
E
x3
00595
02843
02847
00594
00595
EA
warning label
drawer knob
drawer knob screw
13

NOT
CORRECT CORRECT
x6
31686
x10
20212
step 6 case assembly - insert large dowel pins and cams
Insert large dowel pins into holes on the ends of the center rail KA, left bottom rail1. IA and right bottom rail IB.
Insert large cams into the large holes near the ends of the center rail KA, left2. bottom rail IA and right bottom rail IB, so that the arrow is facing the end of the rail.
IA
KA
IB
large cam
large dowel pin
14

NOT
CORRECT CORRECT
x21
20203
x12
31686
small dowel pin
x 2
UA
IC
GA
Gx2
step 7 case assembly - insert small dowel pins and cams
Insert small dowel pins into small holes on the end of the G, GA, IC and UA.1. Insert large cams into the large holes near the ends of the G, GA, IC and UA so that2.
the arrow is facing the end of the rail.
large cam
15

CORRECT NOT CORRECT
x4
31686
x4
20203
x10
31570
step 8 case assembly - insert cams and small dowel pins
Insert small dowel pins into small holes on the end of the FB and HB.1. Insert large cams into the large holes near the ends of the FB and HB so that2.
the arrow is facing the end of the rail.
small dowel pin cam bolt
HB
FB
large cam
16

x4
26085
step 9 case assembly - attach side spacers to side panels
Place spacer FC on FB and FC. Make sure that the finished edge is toward the front.1. Use 2 of the long system screws to attach each of the side spacers to the side panel.2.
HB
FB
FC
FC
front
(finished edge)
front
(finished edge)
long system screw
17

x4
41407
x4
21839
x4
26085
spacer
drawer glide
long system
screw
drawer glide
back screw location
step 10 case assembly - drawer glide detail
Slide the drawer glide to the open position, then place a long system screw into the back hole as shown on the drawing.1.
Note: Oil is on slide for lubrication. Use care in handling, so that lubricant is not transferred to the product.
Place a drawer glide spacer over the long system screw that was just inserted onto the drawer glide.The drawer glide is2. ready to be installed to the side panel (step 11 on the next page)
Repeat this step for all 4 of the glides.3.
x4
front of glide
18

x4
26020
screw
short system
front screw location
step 11 case assembly - attach drawer glides
Place drawer glide with back screw and spacer (from step 10) so that the1. screw is over the back hole of the side panel, then tighten screw.
Move the front of the glide until you can see a drilled hole through the slot on2. the glide, then use a short system screw to attach the front of the glide.
Repeat for the remaining 3 drawer glides.3.
FB
HB
FC
FC
front
(finished edge)
front
(finished edge)
front of glide
19

x6
41407
x12
26020
screw
short system
drawer glide
front screw location
GA
front
G
(finished edge)
front
(finished edge)
x 2
step 12 case assembly - attach drawer glides on divider top and bottom
Place drawer glide so that the back hole is over the back hole of the side panel,1. then use a short system screw to attach the back of the glide.
Move the front of the glide until you can see a drilled hole through the slot on2. the glide, then use a short system screw to attach the front of the glide.
Repeat for the remaining 5 drawer glides.3.
back screw location
front of glide
20