Sportsman SSTABLEFD User manual

SSTABLEFD
Stainless Steel Folding Work Table
Assembly Instructions
Max Weight Capacity = 220 Lbs
READ ALL INSTRUCTIONS AND WARNINGS BEFORE USING THIS PRODUCT.
This manual provides important information on proper operation & maintenance. Every effort has been
made to ensure the accuracy of this manual. These instructions are not meant to cover every possible
condition and situation that may occur. We reserve the right to change this product at any time without
prior notice.
IF THERE IS ANY QUESTION ABOUT A CONDITION BEING SAFE OR UNSAFE,
DO NOT USE THIS PRODUCT!
DO NOT RETURN THIS PRODUCT TO THE RETAILER - CONTACT CUSTOMER SERVICE.
If you experience a problem, have questions or need parts for this product, visit our website
http://www.sportsmanseriesbrand.com or call Customer Service at 1-888-287-6981, Monday-Friday,
8 AM - 4 PM Central Time. A copy of the sales receipt is required.
KEEP MANUAL, SALES RECEIPT & APPLICABLE WARRANTY FOR REFERENCE

Fig 3 UNLOCKED
Fig 5
Fig 2
Fig 1
Fig 4 LOCKED
Fig 6 LOCKED
Fig 7 UNLOCKED
Fig 8
ASSEMBLY INSTRUCTION
WARNING: BE PREPARED FOR TEAM LIFT WHEN ASSEMBLING/MOVING HEAVY TABLE.
WARNING: SHARP EDGES CAN CAUSE INJURY. USE CAUTION WHEN
ASSEMBLING/MOVING TABLE.
WARNING: DO NOT SIT OR STAND ON TABLE. MAKE SURE LOCKING BRACKETS ARE
IN LOCKED POSITION BEFORE USE.
To Unfold and Lock For Use
1. Rotate the table so the top is on the floor on a non-scratching surface. ［Fig.1］
2. Pull out one set of H-frame leg. ［Fig.2］
3. Press the Locking Bracket and slide “toward” the folding joint on both sides. ［Fig.3］［Fig.4］
4. Do the same to the other H-frame leg, then stand upright.
5. Remove all protective film, taking care to avoid scratching the surface.
To Unlock and Fold For Storage
1. Rotate the table so the top is on the floor on a non-scratching surface. ［Fig.5］
2. Press the Locking Bracket［Fig.6］and slide “away” ［Fig.7］from the folding joint on both sides.
3. Do the same to the other H-frame leg, then transport for storage.
Safety Tips
·Use caution when cleaning or handling to prevent risk of injury from exposed metal edges.
·Do not overload the table.
Cleaning
·Before use, remove protective film then clean the table.
·Clean the table using a cleaning agent suitable for use with stainless steel and galvanized surfaces.
·Always remove cleaning agent residues, as this can discolor the surface.
·Never leave any surface damp as this may cause discoloration. Wipe dry thoroughly.
201703