SportZcast ScoreHub User manual

Install Guide

Initial Connections
LAN
Connection
Power Cable
Connect the ScoreHub to Power and your LAN as shown.

Powering on the ScoreHub
Power Button
Power On - Press the Power Button for
about 1 second. The Booting… display
will appear followed by the main display
in about 15 to 30 seconds.
Power Off –Press the Power Button for
about 1 second. The display will blank
when the ScoreHub is powered down.
Force Power Off –Press the Power
Button for 5 seconds.
Avoid just unplugging the ScoreHub.

Main Display
Current IP Address
(may show more than one if Wi-Fi On)
Scoreboard Data Valid
Green-OK Yellow-Not
Network OK
Sending Data to the Cloud
Local Data
Connection(s)
NDI Graphic ON
Heartbeat
(blinks)
BOT Number
Unique ID
(last 4 is your Web Password)
Visitor –Clock –Home
(data is not real-time)

Connecting the Scoreboard
Selecting the Correct Cable
•Gray –Daktronics and Electro-Mech
•Black –Nevco
•Red –Fair-Play and Spectrum
•Specialty –Eversan, Varsity and others
Example: Nevco Controller
Select the proper cable (black for Nevco)
Connect the BNC Connector to the Controller
Connect the DB9 Connector to the ScoreHub
NOTE: The DB9 Connector used
to connect to the ScoreHub is
NOT wired like an off-the-shelf
DB9 cable. Using a cable not
provided or authorized by
Sportzcast will void your
warranty.

Programming
ScoreHub IP Address
Last 4 digits of your UID
5493
To connect to the Web Configuration page of
your ScoreHub
1. Get the IP address of your ScoreHub (on
the main display) and the last 4 digits of
your UID (on main display).
2. On a browser that is connected to the
same LAN as your ScoreHub enter:
http://ipaddress. (for example:
http://192.168.1.32)
3. When you get the login page, enter the
last 4 digits of your UID and press enter.
Note: The first time you use Web Config it may take up to
15 seconds to load.

Static DNS
Programming
Select Scoreboard Vendor
and Sport
(click load scoreboard config
to change)
Current Vendor number
and code
If you select a wireless
scoreboard, you can
enter the RF Group and
Channel.
Some Scoreboards only
require Channel.
Data entered is updated
in Real-Time.
Your can easily change and swap
team names in Real-Time.
Current IP Address
Static IP Address
DHCP/Static Select
IP Subnet
Gateway Address
DHCP/Static DNS Select
Apply Network Changes
(Caution!! –You may loose your
Web Connection due to your
changes)

Programming
Chick the dropdown to see a list
of available Wi-Fi connections
Enter the password for the
selected Wi-Fi
Click Wi-Fi Save to
save your selection
Click to Connect or Disconnect
Chick to Force the ScoreHub to
look for updated software

Monitoring Status
Most of the Information displayed on
the main display of the ScoreHub is
also displayed on the Status page.
The data is updated about once a
second, so the clock is not real-time.

Using the Touch Screen GUI
To Enter the Touch-Screen GUI,
Touch the Main Display
Menu Item
Item Value
Scroll Down
Scroll Up
Cursor Left Cursor Right Go to Save Menu
Enter
Press 1 sec to
enter or Exit
Edit Mode
Back to Main
Display
•Scroll up and down to
select parameters.
•Press Enter for 1 sec to
enter Edit Mode.
•Use Scroll up or Down to
change parameter
values.
•Use Cursor Left and
Right to move the
cursor.
•Press Enter again for 1
sec to exit Edit Mode.

Saving Parameters
•After you make changes to parameters you will
must save them. This is done by accessing menu
item 00 and setting SAVE to 1.
•Hold down the Enter Key for 1 second.
•You will see SAVED displayed followed by the
Restarting screen.
Access the save menu from anywhere by
selecting this key
The Restarting Screen will be
displayed after a Save

Configuration using a Smartphone
Enter IP Address of
your ScoreHub
All the configuration features of the
Web Interface are also available from
your Smartphone.
To Access from your Smartphone:
1. Connect to a Wi-Fi that’s on the
same local network as your
ScoreHub.
2. Enter the IP Address of your
ScoreHub in a browser on your
smartphone.
3. Enter the last for digits of you UID
to Login.
5493
Enter UID and Login

Parameters
Parm#
Description
Values
00
SAVE
0 or 1
01
SBVENDOR
0
–999 (download the latest ScoreHub codes from Sportzcast Website)
02
SBCODE
0
–999 Specific code for the Sport (from ScoreHub code sheet)
03
IP ADDRESS
Current IP Address (you can scroll if multiple addresses)
04
RESET
0
–1 Change to 1 to force a Reset
05
SCOREBOARD
Description of selected Scoreboard
06
BOT
BOT Number
07
EXP
License Expiration
08
UID
Unique ID of the ScoreHub
09
DHCP
0
–1 DHCP (1=On 0=Off)
10
LAN STATIC IP
xxx.xxx.xxx.xxx
Static IP Address
11
LAN SUBNET
xxx.xxx.xxx.xxx
Static Subnet
12
LAN Gateway
xxx.xxx.xxx.xxx
Static IP Address

Parameters
Parm#
Description
Values
13
LAN DHCP DNS
0 or 1 Get DNS from DHCP
14
LAN STATIC DNS
xxx.xxx.xxx.xxx
Static DNS Address
15
WIFI SSID
Wi
-Fi SSID (use Left-Right to scroll and Enter to select)
16
WIFI PASSWORD
Password for the selected SSID
17
WIFI CONFIG
0
–1 (0-Disconnected 1-Connect)
18
NDI CONFIG
0
-1 Enable NDI Output (0-Off 1-On)
19
CLOUDFX ID
Your CloudFx ID (Used with a ControlRoom subscription)
20
HDMI CONFIG
0
-1 Enable HDMI Output (0-Off 1-On)
21
HDI ID
Your CloudFx ID (Used with a ControlRoom subscription)
22
EMULATE
0
–1 (1=Emulate Football 0=Off)
23
CHANNEL
0
-999 Channel number for Wireless Scoreboards
24
ANTENNA
0
–1 (1=External Antenna 0=Internal) note: External antenna optional
25
VISITOR TEAM
Visitor Team Name

Parameters
Parm#
Description
Values
26
HOME TEAM
Home Team Name
27
UPDATE
0
–1 (1=Force Update Check)