Sprayit PRO 21 User manual

QUICK START GUIDE
2
3
4
SPRAYIT
Lock Spray Gun
Trigger Lock
Hose Installation
Spray Gun Tip and Guard Installation
1 Please Read Owner's Manual
Attach Hose to Spray Gun Attach Hose to Inlet
Gun Filter
Lock
Tip
Guard
Seal
Tip
@
*
Inlet
Filter
Turn Power
Switch "Off"
Plug in Power
Cord to a
3-Prong Outlet
Solvent
Waste
Suction
Hose
Prime
Hose
Rotate Prime/
Spray Valve
Down to Prime
5
Turn Pressure
Knob to Prime
or "+"
Turn Power
Switch "On"
The motor will start running.
The solvent will flow up the Suction Hose
and out the Prime Hose into the waste
container. Run for 1minute and turn "Off".
Solvent
Waste
Suction
Hose
Prime
Hose
The take the Suction Hose and put into the
paint container. Turn "On" the Power Switch.
The paint will flow up the Suction Hose and
out the Prime Hose. Turn "Off" the power.
Solvent
Waste
Suction
Hose
Prime
Hose
Paint
Waste
Suction
Hose
Prime
Hose
Prime Sprayer Before Spraying
Prime with Solvent to Flush Prime Sprayer with Paint
Insert tip into guard.
Push and rotate tip clockwise.
Lock tip in place
Customer Service
Monday - Friday
8am - 3pm - Pacific Time
866-409-4581

6
7
8
9
10
Paint
Prepare to Spray
Waste
Reverse Spray Tip. Prime and Spray Add Prime Hose to Paint can Turn Spray Tip to Spray
Spray
Turn Prime Valve to Spray Turn Pressure Knob
to Spray
Add Packing
Saver Lubricant
Clean up
Turn Power
Switch "Off"
Place Suction & Prime Hoses
into Waste Container Turn Prime Valve to Prime
Waste
Spray Gun into Waste Container
SolventSolvent
Suction Suction
HoseHose
PrimePrime
HoseHose
Place the Suction Hose into a container
with solvent. Place the Prime Hose into
a waste container.
Turn the power Swith "On".
Run for 1minute and turn "Off"
the power.
Turn Prime Valve to Spray
Remove the Spray Tip
and Tip Guard
Trigger Lock
Lock
@
*
Lock Trigger Lock
Waste
Unlock and Spray the Gun into Waste
Container until paint is flushed out
completely. Turn Power Switch "Off".
Turn the power
Switch "On".
Unlock
Trigger Lock
Spray Paint on
Surface
Waste
Waste

11
12
13
14
15
Clean the Spray Tip, Tip Guard, Gun Filter, Manifold Filter and Suction Hose Screen
in a container of solvent.
Place Suction & Prime Hoses into a
container with Pump Protector.
Prime to add Pump Protector
Remove Suction and Prime Hoses.
Turn Paint Sprayer on it's back."
Filter
Screen
Pump
Protector
To protect all parts and components.
Clean parts with Mineral Spirits and
Flush sprayer with Pump Protector.
This will protect from corrosion and freezing
Turn Power Switch "Off" Unplug Power Cord from Outlet Turn Pressure to the Lowest Setting
(left)
Storage
Gun Filter
Add Pump Protector into the lower section of the pump.