SpyCameraCCTV SPYWAT102F User manual
Getting Started
Charging your clock
Before using the SPYWAT102F we recommend
making sure the device is fully charged. To
charge, connect to the supplied charger, or your
computers USB port. The blue light will come on,
with the red light ashing alongside it. Once fully
charged the blue and red light will both come on
solid.
Playback on your computer
For playing back the les on your computer, we
recommend using VLC Media Player. The latest
version can be downloaded for free from http://
www.videolan.org
Setting up the watch time
To adjust the time, pull out the watch time set
dial, turn it until the correct time is displayed, and
then push it back in.
Product Guide:
SPYWAT102F
Get to know your recorder
Powering the recorder on (standby mode)
Press and hold the power button for 2-3 seconds.
The status light will light up both blue and red.
After a couple of seconds the red light will go
out and just the blue light will be illuminated.
The device is now in standby waiting for further
instructions.
Recording video
From standby mode, press the video record but-
ton once. The blue light will ash twice, and then
go out. The watch will now be recording.
To stop recording, press the audio record button,
and while the blue light is ashing, press the video
record button. The watch will return to standby
mode.
Recording audio
From standby mode, press and hold the audio
record button until the status light starts to ash
red. The watch is now recording audio. To stop
recording audio, press the audio record button.
The status light will turn blue, and the device is
now back to standby mode.
Taking photos
From standby mode, press the photo record
button. The status light will turn red then back to
blue, indicating a photo has been taken.
Powering o the recorder
Press and hold the power button until the status
light blinks red 3 times then goes out.
If you’re still have problems, you can email us at
2470. Please have your order number to hand to
help us quickly identify your product.
Setting date & time for video timestamp
On the CD you will nd a le called time.txt
To set the date and time, rst copy this le on to
your computer. It doesn’t matter where, as long as
you can nd the le once you have saved it. Once
copied open this le.
It contains the date and time in the format YYYY.
MM.DD HH:MM:SS Y
Edit the le to the current date and time, for
example. At 3PM on the 14th October 2013 the le
would be changed to read:
2013.10.14 15:00:00 Y
Once you have set it to the current date and time,
save the le. Then connect the watch to your
computers USB, and copy the saved time.txt to
the watch storage. Now disconnect the watch and
power it on. The date and time will be updated to
the information in the le.
All done!
Storage Capacity 4GB
USB interface USB 2.0
Weight 100g (approx.)
Minimum illumination 1 LUX
Video Format AVI
Video Resolution 1280x960
Framerate 30fps
Photo Format JPG 3264x2448
Battery Life from Full 1.5 Hours
Battery DC 5V 200MA
Storage Temperature -20 °C to 80°C
Problem Solution
Won’t turn on Ensure the battery is
fully charged
Blue light ashes
rapidly
Restart the camera,
check the battery is
charged and that the
SD card has space
Sound or Video
distortion in
recordings
Fully charge the unit
Not detected by your
PC
Ensure that the USB
connector is fully
pushed in to the watch
Troubleshooting
Other SpyCameraCCTV Watch manuals
