Canyon CNS-SW9 User manual

1
TABLE OF CONTENTS
INTRODUCTION 2
SAFETY PRECAUTIONS 2
PACKAGE CONTENTS 3
DEVICE OVERVIEW 3
BASIC OPERATION 4
CURRENT TIME MODE 5
DAILY ALARM MODE 6
CHRONOGRAPH MODE 7
COUNTDOWN TIMER MODE 8
PACER MODE 9
DUAL TIME MODE 10
COMPASS FUNCTION 11

2
Thank you for purchasing CANYON CNS-SW9, a multi-functional watch device with
digital compass function developed from advanced sensor technology. You have
made an excellent choice and we hope you will enjoy all of its exciting features. To
fully utilize the functions and features of CANYON CNS-SW9, please read through
the user manual carefully before using the product, and follow all of the procedures
in the manual to fully enjoy all features of the product.
Introduction
Safety Precautions
Please observe all safety precautions before using the device. Please follow all
procedures outlined in this manual to properly operate the device. The device
and its accessory, like most electronic or magnetic devices, may be at
interference with pacemaker. Please consult doctor or other professionals
before using the product.
zDo NOT attempt to disassemble or alter any part of the device that is not
described in this guide.
zDo NOT place the device near a heat source or directly expose it to flame.
zNever place the device in vicinity of equipments generating strong
electromagnetic fields. Exposure to strong magnetic fields may cause
malfunctions.
zAvoid exposing the device to extreme temperatures or chemicals such as
gasoline and alcohol.
zAvoid strong impacts for it will damage the device permanently.
zStore device and its accessory at a dry and well ventilated location when they
are not in use.

3
Package Contents
Product Image Item Name
CANYON CNS-SW9 Main Unit
Quick Guide
Documentation CD
Device Overview
LIGHT Button
MODE Button
ST./STP. Button
LAP/RESET Button
Navigation Arrow
LED Display

4
Basic Operation
CANYON CNS-SW9 is a multi-functional watch device that contains 7 functional
modes including Current Time Mode, Daily Alarm Mode, Chronograph Mode,
Countdown Timer Mode, Pacer Mode and Dual Time Mode. Press [MODE] to cycle
through 6 functional modes and [LAP/RESET] to activate Compass Mode as shown
above.

5
Current Time Mode
zPress [ST./STP.] to toggle between
Time Display and Date Display.
zPress and hold [ST./STP.] at Date
Display to switch date format
between Month-Date and
Date-Month.
zPress and hold [MODE] for 2
seconds to enter Settings Mode.
zPress [MODE] to shift through
different digits and settings. Press
[ST./STP.] and [LAP/RESET] to
adjust values.
zPress [MODE] after 12/24 hour
format settings to save modified
settings and exit Settings Mode.

6
Daily Alarm Mode
zPress [ST./STP.] to switch daily
alarm on/off. A daily alarm indicator
will be displayed on the screen.
The alarm will ring continuously for
30 seconds.
zPress [LAP/RESET] to switch
hourly chime on/off. An hourly
chime indicator will be displayed
on the screen.
zPress and hold [MODE] for 2
seconds to enter daily alarm setting.
zPress [MODE] to switch between
hour and minute digits. Press
[ST./STP.] and [LAP/RESET] to
adjust values.
zPress [MODE] after the hour
settings to save modified settings
and exit Settings Mode.

7
Chronograph Mode
zUpon entering, the Chronograph
Mode indicator CHR will be
displayed at the top of screen.
zThe device measures elapsed time
and current split time.
zPress [ST./STP.] to start counting.
Press the button again to stop
counting and the elapsed time will
be displayed on the screen. Press
the button the third time to resume
counting.
zPress [LAP/RESET] while counting
to display current split time and
press the button again to display
current counting.
zPress and hold [LAP/RESET] for 2
seconds to reset counter.

8
Countdown Timer Mode
zUpon entering, the Countdown
Timer Mode indicator CDT will be
displayed at the top of screen.
zPress [ST./STP.] to start
countdown. The residual time will be
displayed on the screen.
zPress [ST./STP.] during count-
down to pause. Press the button
again to resume countdown.
zPress [LAP/RESET] to reset count-
down timer to target time.
NOTE:
The device will beep once per second
when the timer reaches last 5 seconds. It
will also beep for another 10 second
when timer reaches target time.
zPress and hold [MODE] for 2
seconds to enter target time setting.
zPress [MODE] to switch between
hour, minute, and second digits.
Press [ST./STP.] and
[LAP/RESET] to adjust values.
zPress [MODE] after the hour
settings to save modified settings
and exit Settings Mode.

9
Pacer Mode
zUpon entering, the Pacer Mode
indicator PCR will be displayed at
the top of screen.
zPress [ST./STP.] to generate beeps
at a pre-defined pacer rate. Press
the button again to stop.
zPress and hold [MODE] for 2
seconds to enter target time setting.
zPress [ST./STP.] and
[LAP/RESET] to adjust values.
zPress [MODE] again to save
modified settings and exit Settings
Mode.

10
Dual Time Mode
zPress and hold [MODE] for 2
seconds to enter Settings Mode.
zPress [MODE] to shift through
different digits and settings. Press
[ST./STP.] and [LAP/RESET] to
adjust values.
zPress [MODE] after 12/24 hour
format settings to save modified
settings and exit Settings Mode.