Squareled Spectrum Mini 12x10W RGBAW 5in1 User manual

User Manual: Squareled Spectrum Mini 12x10W RGBAW

1. Summarization
Summarization: Thank you for purchasing our PF1012 lighting. Please read these instructions
carefully before begin and operate the xtures according to these instructions to avoid any possible
damages and accidents causes by misusage.
Products introduction: LED PF1012 uses aluminum die-casting shell.The light source adopts high
power 5-in-1 LED, which refers to single LED is made of R,G,B,A,W LED. Long life span, low consump-
tion, good color mixing eect and high brightness are the most prominent features. Each kind of LED
can be independently dimmed.The built-in program includes dimming, strobe, eotic, gradual chan-
ge, fading and so on. It uses power switch, performs low weight and consumption, stable capability
and long life. International standard DMX 512 signal is requested.
Packing list: 1pcs LED PF1012 light, DMX signal cable 1SET, Waterproof input power cable 1 PC,
The User Manual, Warranty Card
2. Safety Instruction
Safety Notes
! Enquire the skilled people before any repair;
! Always make sure disconnect from the power source before setting up, serving and moving;.
! Avoid direct eye exposure to the xture when it is on;
Safety instruction
Make sure the power supply voltage are consistent with this lights，Ensure the use of voltage is in
the range of the request technical parameter.
Before the installation, please check the light’s fasteners and mechanical structure have been recei-
ved in good condition and appear no damage.
This light is designed for indoor use; working temperature is lower than 50 degree.
The xtures maybe mounted in any position provided there is adequate room for ventilation. Make
sure there are no inammable and explosive items (ornaments) in 0.5 meters away.
Yellow / green cabling earthling safety; no icker when the xture is working on.
Manual | Spectrum Mini 12x10W RGBAW 5in1

Manual | Spectrum Mini 12x10W RGBAW 5in1
3. outside Size Picture
4. Main Function
»high quality LED: low consumption, brightness, stable capability and long life
»each color of LED with 16666 dimming.The refresh rate is over 400Hz. Flicker free for video andTV
»RGBAW color mixing, ne and rich colors, good saturation
»Liner dimming from 0-100%, strobe, gradual change, jumping change etc eects
»DMX512 Controller: 4 button set DMX ID address with led display
»auto run /master slave/interconnected multi-machine control
»using switching power supply to protect the LED to work well
»Built-in temperature control function : The output of LED will be reduced when LED is too hot.
»lens degree: 25º, 45º optional
»Protection grade: IP65
»DMX Channel, Optional

Manual | Spectrum Mini 12x10W RGBAW 5in1
5. DMX Control Function
DMX Channel (4CH):
channel DMX value Control Function Remarks
1CH 0-255 RGB color mixing Hue
2CH 0-255 A Dimming 0-100%
3CH 0-255 W Dimming 0-100% Color Saturation
4CH 0-255 General dimming 0-100% purity
DMX Channel (5CH):
channel DMX value Control Function Remarks
1CH 0-255 R 0-100%
2CH 0-255 G 0-100%
3CH 0-255 B 0-100%
4CH 0-255 A 0-100%
5CH 0-255 W 0-100%
DMX Channel (8CH):
channel DMX value Control Function Remarks Priority
1CH 0-255 ，General dimming，
1
2CH 0-255 Red dimming 0——100%
3CH 0-255 Green dimming 0—100%
4CH 0-255 Blue dimming 0—100%
5CH 0-255 A 0-100%
6CH 0-255 W 0-100%
7CH 0-14 Dimming 2
15-255 Strobe Speed
8CH
0-31 Invalid
3
32-63 From dark to bright 32-127, must use CH1,2,3,4,5CH,
otherwise no light. From the 9CH,
start the speed adjustment.
64-95 From bright to dark
96-127 From dark—bright—dark
128-164 RGB Gradient
165-191 dark—bright—dark auto run
192-223 colors jumping change
224-255 Sound control(random) Not for waterproof light
9CH 0-255 Speed Adjustment, slow to fast

Manual | Spectrum Mini 12x10W RGBAW 5in1
DMX Channel (10CH):
channel DMX value Control Function Remarks Priority
1CH 0-255 General dimming
1
2CH 0-255 Red dimming 0——100%
3CH 0-255 Green dimming 0—100%
4CH 0-255 Blue dimming 0—100%
5CH 0-255 A 0-100%
6CH 0-255 W 0-100%
7CH
0-14 Dimming
2
15-255 Strobe Speed
8CH
0-31 Invalid
3
32-63 From dark to bright 32-127, Must use CH1,2,3,4,5CH,
otherwise no light. From the 9CH,
start the speed adjustment.
64-95 From bright to dark
96-127 From dark—bright—dark
128-164 RGB Gradient
165-191 dark—bright—dark auto run
192-223 colors jumping change
224-255 Sound control(random) Not for waterproof light
9CH 0-255 Speed Adjustment, slow to fast
10CH
0-5
6-55
56-105
106-155
156-205
206-255
Set by LED display
DIMMER0
DIMMER1
DIMMER2
DIMMER3
DIMMER4

Manual | Spectrum Mini 12x10W RGBAW 5in1
6. Display Operation
»MENU : access the menu or return to a previous menu option
»ENTER: select the current menu option
»UP: menu selection or parameter increments
»DOWN: menu selection or parameters decrease

Manual | Spectrum Mini 12x10W RGBAW 5in1
7. Menu Instruction

1. Operating instruction:
MENU (UP/DOWN)+ENTER+(UP/DOWN)+ENTER
Remark: Exp: Select the DMX mode, Here are the operation details:
»Press the MENU, go back to the initial setting
»Press UP/DOWN, display“Addr”
»Press ENTER to change the content, the display will glinting at this moment
»Press UP/DOWN to change the address code to select d001
»Press ENTER to select and store the current menu options. DMX mode will be
stored automatically and the screen will stop glinting.
»Exp: Select DMX Channels optional mode, the operation is as below:
»Press MENU: go back to the initial setting
»Press UP/DOWN: display ”CHnd”
»Press ENTER to change the content, the display will glinting at this moment
»Press UP/DOWN to select the DMX channels that you need, 4CH/5CH/9CH and so on
»Press ENTER for 10 seconds to select and store the current menu options. DMX channel will be stored
automatically and the screen will stop glinting.
Exp turn o the display, the operation is as below:
»Press MENU: go back to the initial setting
»Press UP/DOWN: display“LED”
»Press ENTER to change the content, the display will ash at this moment
»Press UP/DOWN to select“OFF”
»Press ENTER to conrm, then select the working mode that you need.When stop pressing, the display
will turn o after a while.When the display is o, press any button to activate the display. If setting the
led to“o”, when stop pressing, the display will turn o after a while.
2. Details of program built inside (Pr- -) Press MENU, go back to the initial setting
»Press MENU, go back to the initial setting
»Press UP / DOWN until Pr--
»Press ENTER to choose, the display will ash at this moment
»Press UP / DOWN to change the address code to select pr00
»Press ENTER to select and store the current menu options. DMX mode will be stored automatically and
the screen will stop ashing.
»Remark: Pr32--- Pr35 Can change the content Of SP，correct the speed of jumping change , SP00 is the
fastest, SP15 is the slowest
»Pr00-Pr31: R,G,B,A,W single color or multi-colors mixing
»Pr32: 5 colors jumping change
»Pr33: 5 colors jumping change +strobe
Manual | Spectrum Mini 12x10W RGBAW 5in1

Manual | Spectrum Mini 12x10W RGBAW 5in1
8. Operating Control Instruction
Master/Slave:
Master:The master should always work as a master as long as it is not set in a DMX mode whatever
other modes it is. And it send out the signal so that the slave synchronous with it.To avoid the host
signal and DMX512 signals interfere with each other, should cut o the DMX512 signals. The signal
lines are longer than 60 meters (32 lamps) ,should increase a signal amplier.
Slave: the Slave must be set in DMX mode and the address code should be A001, to assure receive the
master’s signals correctly. Only one light can be set as a Master and others are slaves.
9. XLR cable connecting
XLR cable:
The standard way of connecting the XLR is: one end connects to the male plug, and the other end
connects to the female. As bellow: pin 1: ground, pin 2: negative signal, pin 3: positive signal
Noted: In order to avoid failures and interference signal transmission, we connect a resistance120Ω
(1/4W)at the end of the DMX connecting as below:




The Conversion between 3 pin and 5 pin XLR
If the output cable of DMX512 controller is the 5PIN, please use 1pc 5PIN to 3PIN cable
10. Connecting picture
Light connecting picture: Note:This product uses input and output power cord 1.5 m, copper core
wire, power line in series, when 220V AC should less than 25lights, and 110V AC less than 13 lights! ! !
Manual | Spectrum Mini 12x10W RGBAW 5in1


Manual | Spectrum Mini 12x10W RGBAW 5in1
11. Trouble Shooting
Problem Checking Way
Can not turn on the light
• Check the power source plug is in normal or not
• Check the switch of the lights is o or on
• Check the fuse if in normal
DMX can not control it
• Check the DMX cable is connect to the lights or not
• Check the DMX512 controller work in normal or not
• Check the DMX cable is normal or not
• Check if the lights is in DMX mode (A001)
Display not bright
• When connect to the electricity, did the led ash one time? If so, the power
source is normal; If not, please check if the switch and the transformer has
power out
• Check if the power input of the IC board is normal
• Check if the cable connect to the display loose
• Change the main board to see if it is normal.
• Change the display
LED not light
• When connect to the electricity, did the led ash one time? If so, the power
source is normal; If not, please check if the switch and the transformer has
power out
• Check if the power input of the IC board is normal
• Check if the cable connect to the display loose
• Change the main board to see if it is normal.
• Chang the display
Some of the LED not light
• LED is connected by leds in series rst, then connect parallel, so please check if
the leds is loose
• Use the multimeter to check if the led is bright or not, of not, please change the
led
• check whether current limiting resistor is normal or not
• Check constant current IC is normal or not (compared with the normal IC)
Single color leds always bright/
not bright
• Check the switch of this color is normal or not
• Change the IC control board
Noted: only professional persons can do as above!

Manual | Spectrum Mini 12x10W RGBAW 5in1
12. Technical Specication
• Input voltage: AC100-264V/47-63HZ
• Output voltage: DC24V
• Consume: 120W
• Lamp Type: High Power LED(10w)
• Lamp Spec: RGBAW 5-in-1 LED(12 pcs)
• Refresh Rate: 400HZ
• Life Span: 50000~100000 hours
• Control Signal: DMX512, master and slave
• Control mode: stand alone/ DMX/ master and slave
• Channel: 4,5,9,10 CH
• Color eect: R, G, B, A, W color mixing
• Function Eect: dimmer, strobe, eotic, gradual change
• Beam Angle:25° / 45°
• Cooling mode: natural convection
• Protection rate:IP65
• Anti-electricity intension，1.5KV
• Insulation Resistance > MΩ
• Size: 284*193*254mm
• Net Weight: 5KG

Das Lichttechnikhaus Vertriebs GmbH
Rudolf-Diesel-Str. 3, D-89312 Günzburg
Telefon [phone]
Fax [phone]
E-Mail [email protected]
Web www.lth-gmbh.de