SRIXON QTS User manual

Instruction Manual / Setting Adjustments
SRIXON Z Series
Part names and features
How to remove and install QTS sleeve (torque wrench operation)
How to remove and install QTS sleeve (sleeve installation)
QTS sleeve position overview
QTS sleeve performance guide
How to change tuning weights
Tuning weight performance guide
Important Precautions—Please Read!
P01
P03
P05
P07
P09
P11
P13
P17
取扱説明書/ セッティング調整マニュアル
SRIXONZシリーズ
各部の名称と機能
QTSスリーブの脱着方法（トルクレンチの操作）
QTSスリーブの脱着方法（スリーブの装着）
QTSスリーブのポジション一覧表
QTSスリーブのパフォーマンスガイド
チューニングウエイト交換方法
チューニングウエイトのパフォーマンスガイド
重要事項必ずお読みください
P01
P03
P05
P07
P09
P11
P13
P17
Instruction Manual / Setting Adjustments
SRIXON Z Series
Part names and features
How to remove and install QTS sleeve (torque wrench operation)
How to remove and install QTS sleeve (sleeve installation)
QTS sleeve position overview
QTS sleeve performance guide
How to change tuning weights
Tuning weight performance guide
Important Precautions—Please Read!
P01
P03
P05
P07
P09
P11
P13
P17
取扱説明書/ セッティング調整マニュアル
SRIXONZシリーズ
各部の名称と機能
QTSスリーブの脱着方法（トルクレンチの操作）
QTSスリーブの脱着方法（スリーブの装着）
QTSスリーブのポジション一覧表
QTSスリーブのパフォーマンスガイド
チューニングウエイト交換方法
チューニングウエイトのパフォーマンスガイド
重要事項必ずお読みください
P01
P03
P05
P07
P09
P11
P13
P17

*This product is only available in
selected areas (countries) due to limited quantities.
Use only the torque wrench
and tuning weights provided.
Use of damaged or
improperly installed
tuning weights may result
in injury or product damage.
Able to adjust swing weight and
precisely set depth of center of
gravity (CG) by adjusting weights.
Tuning weight
QTS sleeve
Change position to set desired
face angle, lie angle, and loft angle.
Weight port (back)Weight port (heel) Weight port (toe)
Custom torque wrench
Accessories
Part names and features
Z765 Driver
Z565 Driver Z765 Limited Model Driver
Able to adjust swing weight and
precisely set depth of center of
gravity (CG) by adjusting weights
on toe and heel.
Tuning weight
01 02
*This product is only available in
selected areas (countries) due to limited quantities.
Use only the torque wrench
and tuning weights provided.
Use of damaged or
improperly installed
tuning weights may result
in injury or product damage.
Able to adjust swing weight and
precisely set depth of center of
gravity (CG) by adjusting weights.
Tuning weight
QTS sleeve
Change position to set desired
face angle, lie angle, and loft angle.
Weight port (back)Weight port (heel) Weight port (toe)
Custom torque wrench
Accessories
Part names and features
Z765 Driver
Z565 Driver Z765 Limited Model Driver
Able to adjust swing weight and
precisely set depth of center of
gravity (CG) by adjusting weights
on toe and heel.
Tuning weight
01 02
*This product is only available in
selected areas (countries) due to limited quantities.
Use only the torque wrench
and tuning weights provided.
Use of damaged or
improperly installed
tuning weights may result
in injury or product damage.
Able to adjust swing weight and
precisely set depth of center of
gravity (CG) by adjusting weights.
Tuning weight
QTS sleeve
Change position to set desired
face angle, lie angle, and loft angle.
Weight port (back)Weight port (heel) Weight port (toe)
Custom torque wrench
Accessories
Part names and features
Z765 Driver
Z565 Driver Z765 Limited Model Driver
Able to adjust swing weight and
precisely set depth of center of
gravity (CG) by adjusting weights
on toe and heel.
Tuning weight
01 02
*This product is only available in
selected areas (countries) due to limited quantities.
Use only the torque wrench
and tuning weights provided.
Use of damaged or
improperly installed
tuning weights may result
in injury or product damage.
Able to adjust swing weight and
precisely set depth of center of
gravity (CG) by adjusting weights.
Tuning weight
QTS sleeve
Change position to set desired
face angle, lie angle, and loft angle.
Weight port (back)Weight port (heel) Weight port (toe)
Custom torque wrench
Accessories
Part names and features
Z765 Driver
Z565 Driver Z765 Limited Model Driver
Able to adjust swing weight and
precisely set depth of center of
gravity (CG) by adjusting weights
on toe and heel.
Tuning weight
01 02
*This product is only available in
selected areas (countries) due to limited quantities.
Use only the torque wrench
and tuning weights provided.
Use of damaged or
improperly installed
tuning weights may result
in injury or product damage.
Able to adjust swing weight and
precisely set depth of center of
gravity (CG) by adjusting weights.
Tuning weight
QTS sleeve
Change position to set desired
face angle, lie angle, and loft angle.
Weight port (back)Weight port (heel) Weight port (toe)
Custom torque wrench
Accessories
Part names and features
Z765 Driver
Z565 Driver Z765 Limited Model Driver
Able to adjust swing weight and
precisely set depth of center of
gravity (CG) by adjusting weights
on toe and heel.
Tuning weight
01 02
*This product is only available in
selected areas (countries) due to limited quantities.
Use only the torque wrench
and tuning weights provided.
Use of damaged or
improperly installed
tuning weights may result
in injury or product damage.
Able to adjust swing weight and
precisely set depth of center of
gravity (CG) by adjusting weights.
Tuning weight
QTS sleeve
Change position to set desired
face angle, lie angle, and loft angle.
Weight port (back)
Weight port (heel) Weight port (toe)
Custom torque wrench
Accessories
Part names and features
Z765 Driver
Z565 Driver
Z765 Limited Model Driver
Able to adjust swing weight and
precisely set depth of center of
gravity (CG) by adjusting weights
on toe and heel.
Tuning weight
01 02
*This product is only available in
selected areas (countries) due to limited quantities.
Use only the torque wrench
and tuning weights provided.
Use of damaged or
improperly installed
tuning weights may result
in injury or product damage.
Able to adjust swing weight and
precisely set depth of center of
gravity (CG) by adjusting weights.
Tuning weight
QTS sleeve
Change position to set desired
face angle, lie angle, and loft angle.
Weight port (back)Weight port (heel) Weight port (toe)
Custom torque wrench
Accessories
Part names and features
Z765 Driver
Z565 Driver
Z765 Limited Model Driver
Able to adjust swing weight and
precisely set depth of center of
gravity (CG) by adjusting weights
on toe and heel.
Tuning weight
01 02

Hold the club upright with
the grip resting on the ground.
Use this position when loosening
and tightening.
1
Supporting the head in your hand,
gently insert the torque wrench
into the screw hole.
2Loosen 3Tighten
With the torque wrench
aligned with the shaft,
turn it counterclockwise.
With the torque wrench
aligned with the shaft,
turn it clockwise until
you hear a 'click'.
4
Damaged QTS sleeve and/or improperly installed
QTS sleeve may result in injury or product damage.
* Not compatible with SRIXON Z-STAR series torque wrenches.
Do not use any tool other than the supplied torque wrench.
Also do not use the supplied torque wrench on any other products.
Failure to insert the tip of the torque wrench firmly
into the screw hole may result in damage to the screw.
Position the torque wrench so that it is correctly aligned with the shaft.
Improperly aligned
torque wrench
Shaft and torque
wrench should
form a straight line
How to remove and install QTS sleeve (torque wrench operation)
Failure to tighten until you hear a 'click' may result in separation
of the club head or product damage.
Always tighten until you hear a 'click'.
03 04
* Be careful not to loosen the screw too much,
as you may drop the screw and lose the washer.
Click

Insert the shaft into the head
5QTS setting examples 6
How to remove and install QTS sleeve (sleeve installation)
Align the position line with
the mark and press straight in.
* Illustration shows neutral position
For -1LOFT(LOFT-1°)
Align the mark on the head with
“-1LOFT” on the QTS sleeve and press
straight in.
For +1LOFT(LOFT+1°)
Align the mark on the head with
“+1LOFT” on the QTS sleeve and press
straight in.
The shaft may not insert fully if the position line
and sleeve mark are not correctly aligned.
Press the shaft all the way in until the
QTS sleeve is completely covered.
05 06

QTS sleeve position overview
07 08
Position Loft Face positioning Lie angle
Initial
STD LOFT
Standard loft
STD UR
Standard Upright
-1LOFT +1LOFT
Straight face Open face Straight face Closed face
Standard
Moderate upright Upright Moderate upright
±0° −1.0° ±0° +1.0°
−2.0° ±0° +1.0° +2.0°±0°
+1.0°
−1.0°
−1.5°
+1.5°
−0.5°
−1.0°
+2.0° +2.0°
+0.5°
+2.0°
+1.5°
+1.0°
+1.5° +1.0°
+1.0°
+1.5°
+0.5°
+0.5°
+1.0°
±0°±0°
−0.5°
−1.0°
±0°
−1.0°
−1.5°
+0.5°

QTS sleeve performance guide
09 10
“If ball flight is too low
(ball tends to drop)”
High launch angle for longer carry distance.
“If ball flight is too high
(ball tends to rise)”
Stronger flight and more roll(especially into the wind).
-1
LOFT
(Loft -1˚)
+1
LOFT
(Loft +1˚)
Example of
sleeve position
on Pg.8.
Example of
sleeve position
on Pg.7.
Trajectory at initial setting Trajectory after tuning
g
T
g
*Image *Image
Trajectory at initial setting Trajectory after tuning
g
T
g

How to change tuning weights
1Pull the torque wrench directly
up to remove the weight.
2 3
11 12
Hold the clubhead securely in one hand
and the custom torque wrench in the other.
Insert the custom torque wrench
straight into the hole in the center of
the tuning weight and rotate it
counterclockwise to unlock.
* If the weight is difficult to remove
lightly jiggle and pull the tuning weight
at the same time with torque wrench
still inserted.
Place the desired tuning weight on
the tip of the custom torque wrench,
insert it into the weight port,
and rotate it clockwise to lock.
Improper installation of the tuning weight may result in injury or product damage.
Do not use any tool other than the supplied torque wrench.
Also do not use the supplied torque wrench on any other products.
Hold both the custom torque wrench and the clubhead securely while exchanging the weights.
Ensure that the tip of the custom torque wrench is fully inserted
into the hole of the tuning weight.
Failure to tighten until you hear a 'click' may result in separation
of the club head or product damage.
Always tighten until you hear a 'click'.

Tuning weight performance guide
13 14
Able to adjust to optimal swing weight
by changing weights.
Weight port (back)
*9g weight is installed at purchase.
Changing weights by ±2g will change the swing weight by ±1 points.
3g5g7g9g11g13g15 g
Swing weight HeavyLight
-3
Points -2 Points -1 Points 0+1 Points +2 Points +3 Points
* The shape of this model’s tuning weight differs from 2010, 2012, 2014 models.
9g (stainless)
11g
(tungsten-nickel) 13g (tungsten-nickel) 15g (tungsten-nickel)
3g (aluminum)5g (titanium)7g (stainless)
Z765 Driver
Z565 Driver
Extra weight cartridges Made in China

17 18
To ensure a safe and satisfying golfing experience, please be sure to follow these Important Precautions.
Important
Precautions
The manufacturer assumes no liability for injury or product damage due to failure to comply with the instructions herein. Be sure to read the Important Precautions carefully and exercise appropriate care.
Rules of Golf
You may not change the QTS sleeve position
or exchange weights during a round.
SRIXON Z Series clubs conform with R&A-approved Rules of Golf. However,
it is against the rules to modify club performance during a round by changing
the QTS sleeve position or exchanging weights to change the CG position,
as this breaches the Rules of Golf regulation 4-2a,
which states: “During a stipulated round, the playing characteristics of
a club must not be purposely changed by adjustment or by any other means.”
Before using
Carefully inspect the QTS sleeve and tuning weight prior to each round
of golf or practice session to confirm that they are properly secured.
If the tuning weight is not secured firmly in the weight port when
swinging the club during a game or practice session, there is
a possibility that the weight could fly off, injuring either you or a bystander.
1
Tighten until you hear a 'click'.
If you fail to properly secure the
sleeve, there is a possibility that
the head may come off in mid
swing, injuring either you or a
bystander.
2Check to see that the QTS sleeve is properly secured.
Check to see that the tuning weight is locked securely in position.
Tighten until you hear a 'click'.
Tuning weight performance guide
*This product is only available in
selected areas (countries)due to
limited quantities.
Z765 Limited Model Driver
Weight port (toe)
Installing a heavy weight
on toe side and light weight
on the heel side creates a
longer CG.
Installing a heavy weight
on heel side and light weight
on the toe side creates a
shallower CG.
Heavy
Light Heavy
Light
Weight port (heel)
*3g weight on toe side and 9g weight on heel side are installed at purchase
15 16
* The shape of this model’s tuning weight differs from 2010, 2012, 2014 models.
“If ball flight goes
left or hook”
A heavier weight on the toe moves
the CG towards the toe.
“If ball flight goes
right or slice”
A heavier weight on the heel moves
the CG towards the heel.
Trajectory at initial setting Trajectory after tuning
g
T
g
Trajectory at initial setting Trajectory after tuning
g
T
g
*Hook/Slice trajectory performance will be reverse for Left Handed model
*Image *Image
Extra weight cartridges Made in China
9g (stainless)
11g
(tungsten-nickel) 13g (tungsten-nickel) 15g (tungsten-nickel)
3g (aluminum)5g (titanium)7g (stainless)
Tuning weight performance guide
*This product is only available in
selected areas (countries)due to
limited quantities.
Z765 Limited Model Driver
Weight port (toe)
Installing a heavy weight
on toe side and light weight
on the heel side creates a
longer CG.
Installing a heavy weight
on heel side and light weight
on the toe side creates a
shallower CG.
Heavy
Light Heavy
Light
Weight port (heel)
*3g weight on toe side and 9g weight on heel side are installed at purchase
15 16
* The shape of this model’s tuning weight differs from 2010, 2012, 2014 models.
“If ball flight goes
left or hook”
A heavier weight on the toe moves
the CG towards the toe.
“If ball flight goes
right or slice”
A heavier weight on the heel moves
the CG towards the heel.
Trajectory at initial setting Trajectory after tuning
g
T
g
Trajectory at initial setting Trajectory after tuning
g
T
g
*Hook/Slice trajectory performance will be reverse for Left Handed model
*Image *Image
Extra weight cartridges Made in China
9g (stainless)
11g
(tungsten-nickel) 13g (tungsten-nickel) 15g (tungsten-nickel)
3g (aluminum)5g (titanium)7g (stainless)

Care and storage
Only remove the QTS sleeve or tuning weights when making adjustments.
All parts should remain properly installed at all other times,
including when the club is in storage, to ensure that no foreign objects
or debris become lodged in the sleeve connection or screw holes.
1
Do not heat the QTS sleeve as it may damage the product.
4
Avoid adjusting the QTS sleeve when the temperature is below
-5˚C or above 45˚C, as it may damage the QTS sleeve.
5
6
When removing the QTS sleeve or tuning weights, be sure that you do
so in a clean location to ensure that no foreign objects or debris
become lodged inside.
Installing the tuning weight while there are foreign objects or debris
in the weight port may damage either the weight or the port, and also
may prevent proper installation or removal of the tuning weight.
It may even cause internal damage to the club head, adversely
affecting club performance.
2
If the QTS sleeve or weight ports become soiled with water, dirt,
or other debris, wipe them clean with a cotton swab or a soft,
clean and dry cloth.
3
19 20
To ensure a safe and satisfying golfing experience, please be sure to follow these Important Precautions.
Important
Precautions
The manufacturer assumes no liability for injury or product damage due to failure to comply with the instructions herein. Be sure to read the Important Precautions carefully and exercise appropriate care.
Please be aware that attempts to remove the QTS sleeve from
the shaft or intentionally disassembling it may not comply with
the manufacturer’s warranty.
* For information on manufacturer's warranty regulations, please refer
to the owner's manual and warranty included with your golf club.
4
17 18
To ensure a safe and satisfying golfing experience, please be sure to follow these Important Precautions.
Important
Precautions
The manufacturer assumes no liability for injury or product damage due to failure to comply with the instructions herein. Be sure to read the Important Precautions carefully and exercise appropriate care.
Rules of Golf
You may not change the QTS sleeve position
or exchange weights during a round.
SRIXON Z Series clubs conform with R&A-approved Rules of Golf. However,
it is against the rules to modify club performance during a round by changing
the QTS sleeve position or exchanging weights to change the CG position,
as this breaches the Rules of Golf regulation 4-2a,
which states: “During a stipulated round, the playing characteristics of
a club must not be purposely changed by adjustment or by any other means.”
Before using
Carefully inspect the QTS sleeve and tuning weight prior to each round
of golf or practice session to confirm that they are properly secured.
If the tuning weight is not secured firmly in the weight port when
swinging the club during a game or practice session, there is
a possibility that the weight could fly off, injuring either you or a bystander.
1
Tighten until you hear a 'click'.
If you fail to properly secure the
sleeve, there is a possibility that
the head may come off in mid
swing, injuring either you or a
bystander.
2Check to see that the QTS sleeve is properly secured.
Check to see that the tuning weight is locked securely in position.
Tighten until you hear a 'click'.
17 18
To ensure a safe and satisfying golfing experience, please be sure to follow these Important Precautions.
Important
Precautions
The manufacturer assumes no liability for injury or product damage due to failure to comply with the instructions herein. Be sure to read the Important Precautions carefully and exercise appropriate care.
Rules of Golf
You may not change the QTS sleeve position
or exchange weights during a round.
SRIXON Z Series clubs conform with R&A-approved Rules of Golf. However,
it is against the rules to modify club performance during a round by changing
the QTS sleeve position or exchanging weights to change the CG position,
as this breaches the Rules of Golf regulation 4-2a,
which states: “During a stipulated round, the playing characteristics of
a club must not be purposely changed by adjustment or by any other means.”
Before using
Carefully inspect the QTS sleeve and tuning weight prior to each round
of golf or practice session to confirm that they are properly secured.
If the tuning weight is not secured firmly in the weight port when
swinging the club during a game or practice session, there is
a possibility that the weight could fly off, injuring either you or a bystander.
1
Tighten until you hear a 'click'.
If you fail to properly secure the
sleeve, there is a possibility that
the head may come off in mid
swing, injuring either you or a
bystander.
2Check to see that the QTS sleeve is properly secured.
Check to see that the tuning weight is locked securely in position.
Tighten until you hear a 'click'.

SRIXON.com
SRIXON U.S.A.
5601 Skylab Rd., Huntington Beach, CA 92647, U.S.A.
Tel:[phone] Fax:[phone]
SRIXON CANADA
#104-19099 25th Ave. Surrey. BC, V3S 3V2, Canada
Tel:[phone] Fax:[phone]
SRIXON SPORTS EUROPE, LTD.
3, Newman Lane Industrial Estate, Alton, Hampshire,
GU34 2QR, UK.
Tel:[phone] Fax:[phone]
SRIXON SPORTS AUSTRALASIA, PTY. LTD.
2/707 Forest Road, Peakhurst NSW 2210, Australia
Tel:[phone] Fax:[phone]
SRIXON SPORTS SOUTH AFRICA (PTY) LTD.
Unit6 Pentagon Park, Capital Hill Commercial Estate Le Roux
Road. Midrand, Johonnesburg South Africa
Tel:[phone] Fax:[phone]
SRIXON SPORTS ASIA SDN. BHD.
1 Jalan U1/32, Hicom Glenmarie Industrial Park,
40150 Shah Alam, Selangor Darul Ehsan, Malaysia
Tel:[phone] Fax:[phone]
SRIXON SPORTS (THAILAND) CO.,LTD.
317 Kamol Sukosoi BLD., FL#10, Silmo, RD., Silmo,
Bangrak, Bangkok, 10500 Thailand
Tel:[phone] Fax:[phone]
CHANGSHU SRIXON SPORTS Co., LTD.
NO.9, Yangzijiang Road, ChangShu Economic Development Zone,
Jiangsu, China.
Tel:[phone] Fax:[phone]
SRIXON SPORTS HONG KONG Co., LTD.
Unit 06, 11/F., SOLO Bldg., 41-43 Carnarvon Road,
Tsimshatsui, KLN, HK.
Tel:[phone] Fax:[phone]
DUNLOP SPORTS KOREA CO.,LTD.
4th Fl, 76, Sapyeong-daero, Seocho-gu,
Seoul, 06575, Korea
Tel:[phone] Fax:[phone]
スリクソン商品情報サイト
http://golf.dunlop.co.jp/srixon/index.html
あなたのゴルフをもっと楽しくする
情報満載の会員サイトG-ATTEND（ ジ ー ア テ ンド ）
http://www.g-attend.jp/
ダンロップ商品情報サイト
http://golf.dunlop.co.jp/