SRIXON Z355 User instructions

SRIXON.COM
SRIXON U.S.A.
5601 Skylab Rd., Huntington Beach, CA 92647, U.S.A.
Tel: [phone] Fax: [phone]
SRIXON CANADA
19099 25th Ave. #104 Surrey. BC, V3S 3V2, Canada
Tel: [phone] Fax: [phone]
SRIXON SPORTS EUROPE, LTD.
3, Newman Lane Industrial Estate, Alton, Hampshire,
GU34 2QR, UK.
Tel:[phone] Fax:[phone]
SRIXON SPORTS AUSTRALASIA, PTY. LTD.
2/707 Forest Road, Peakhurst, PO Box 152, Peakhurst,
NSW 2210, Australia
Tel:[phone] Fax:[phone]
SRIXON SPORTS SOUTH AFRICA (PTY) LTD.
Unit 6 Pentagon Park, Capital Hill Commercial Estate Le Roux
Road. Midrand, Johonnesburg South Africa
Tel:[phone] Fax:[phone]
DUNLOP SPORTS CO. LTD.
3-6-9 Wakinohama-cho, Chuo-ku, Kobe, Hyogo 651-0072, Japan
TEL: [phone] FAX: [phone]
SRIXON SPORTS ASIA SDN. BHD.
1 Jalan U1/32, Hicom Glenmarie Industrial Park, 40150 Shah Alam,
Selangor Darul Ehsan, Malaysia
Tel:[phone] Fax:[phone]
SRIXON SPORTS (THAILAND) CO.,LTD.
952 Ramaland Bld. Fl#17, Rama IV Road, Suriyawongse, Bangrak,
Bangkok 10500 Thailand
Tel:[phone] Fax:[phone]
CHANGSHU SRIXON SPORTS Co., LTD.
NO.9, Yangzijiang Road, ChangShu Economic Development Zone,
Jiangsu, China.
Tel:[phone] Fax:[phone]
SRIXON SPORTS HONG KONG Co., LTD.
Unit 06, 11/F., SOLO Bldg., 41-43 Carnarvon Road, Tsimshatsui,
KLN, HK.
Tel:[phone] Fax:[phone]
DUNLOP SPORTS KOREA CO.,LTD.
4th Fl, 76, Sapyeong-daero, Seocho-gu,
Seoul, 137-806, Korea
Tel:[phone] Fax:[phone]

Instruction Manual /
Setting Adjustments

.
THANK YOU
FOR YOUR PURCHASE.
Our mission is to make you better. One shot, one round, one
weekend at a time. We can’t promise it will be overnight. No
one can. But we can say we’ll be there. With meaningful
innovations that start in the lab, not the marketing
department. We’re here to play, to challenge, to compete at
the highest level. We’re here for the Journey.
THE JOURNEY TO BETTER.

.
THANK YOU
FOR YOUR PURCHASE.
Our mission is to make you better. One shot, one round, one
weekend at a time. We can’t promise it will be overnight. No
one can. But we can say we’ll be there. With meaningful
innovations that start in the lab, not the marketing
department. We’re here to play, to challenge, to compete at
the highest level. We’re here for the Journey.
THE JOURNEY TO BETTER.

PART NAMES AND FEATURES
QTS sleeve
Accessories
Change position to set desired
face angle, lie angle, and loft angle
Z 355 Driver
Custom torque wrench
Part names and features P04
How to install and remove QTS sleeve P05
QTS Sleeve performance guide P09
QTS Sleeve position overview P11
Important Precautions! Please Read P13
How to install and remove QTS sleeve (sleeve installation) P07
Table Of Contents

PART NAMES AND FEATURES
QTS sleeve
Accessories
Change position to set desired
face angle, lie angle, and loft angle
Z 355 Driver
Custom torque wrench
Part names and features P04
How to install and remove QTS sleeve P05
QTS Sleeve performance guide P09
QTS Sleeve position overview P11
Important Precautions! Please Read P13
How to install and remove QTS sleeve (sleeve installation) P07
Table Of Contents

HOW TO INSTALL AND REMOVE QTS SLEEVE
Use this position when loosening
and tightening.
Hold the club upright with
the grip resting on the ground.
Supporting the head in your hand,
gently insert the torque wrench
into the screw hole.
Shaft and torque
wrench should
form a straight line
Improperly aligned
torque wrench
Do not use any tool other than the supplied torque wrench.
Also do not use the supplied torque wrench on any other products.
Damaged QTS sleeve and/or improperly installed
QTS sleeve may result in injury or product damage.
* Not compatible with SRIXON Z-STAR series torque wrenches.
Position the torque wrench so that it is correctly aligned with the shaft.
Failure to insert the tip of the torque wrench firmly into the screw hole may
result in damage to the screw.
Using a golf club with a broken washer may damage the club head or the sleeve.
Always tighten until you hear a ‘click’.
Failure to tighten until you hear a ‘click’ may result in separation of the club
head or product damage.
Once you hear a ‘click’, stop tightening.
Over-tightening may damage the QTS sleeve.
Loosen Tighten
With the torque wrench
aligned with the shaft,
turn it counterclockwise.
With the torque wrench
aligned with the shaft,
turn it clockwise until
you hear a
‘click’.
When removing the QTS sleeve, be careful not to loosen the screw too much,
as you may drop the screw and lose the washer.

HOW TO INSTALL AND REMOVE QTS SLEEVE
Use this position when loosening
and tightening.
Hold the club upright with
the grip resting on the ground.
Supporting the head in your hand,
gently insert the torque wrench
into the screw hole.
Shaft and torque
wrench should
form a straight line
Improperly aligned
torque wrench
Do not use any tool other than the supplied torque wrench.
Also do not use the supplied torque wrench on any other products.
Damaged QTS sleeve and/or improperly installed
QTS sleeve may result in injury or product damage.
* Not compatible with SRIXON Z-STAR series torque wrenches.
Position the torque wrench so that it is correctly aligned with the shaft.
Failure to insert the tip of the torque wrench firmly into the screw hole may
result in damage to the screw.
Using a golf club with a broken washer may damage the club head or the sleeve.
Always tighten until you hear a ‘click’.
Failure to tighten until you hear a ‘click’ may result in separation of the club
head or product damage.
Once you hear a ‘click’, stop tightening.
Over-tightening may damage the QTS sleeve.
Loosen Tighten
With the torque wrench
aligned with the shaft,
turn it counterclockwise.
With the torque wrench
aligned with the shaft,
turn it clockwise until
you hear a
‘click’.
When removing the QTS sleeve, be careful not to loosen the screw too much,
as you may drop the screw and lose the washer.

HOW TO INSTALL AND REMOVE QTS SLEEVE (SLEEVE INSTALLATION)
Insert the shaft into the head QTS setting examples
The shaft may not insert fully if the position line
and sleeve mark are not correctly aligned.
Press the shaft all the way in until the QTS
sleeve is completely covered.
Align the position line with the
mark and press straight in.
* Illustration shows neutral position
For right position
(Open face)
For left position
(Closed face)
Align the mark on the head with the ‘R’
on the QTS sleeve and press straight in.
Align the mark on the head with the ‘L’
on the QTS sleeve and press straight in.
Check to see that the QTS sleeve is properly secured.
Tighten the sleeve until you hear a
‘click’. If you fail to properly secure
the sleeve, there is a possibility that
the head may come off in mid swing,
injuring either you or a bystander.

HOW TO INSTALL AND REMOVE QTS SLEEVE (SLEEVE INSTALLATION)
Insert the shaft into the head QTS setting examples
The shaft may not insert fully if the position line
and sleeve mark are not correctly aligned.
Press the shaft all the way in until the QTS
sleeve is completely covered.
Align the position line with the
mark and press straight in.
* Illustration shows neutral position
For right position
(Open face)
For left position
(Closed face)
Align the mark on the head with the ‘R’
on the QTS sleeve and press straight in.
Align the mark on the head with the ‘L’
on the QTS sleeve and press straight in.
Check to see that the QTS sleeve is properly secured.
Tighten the sleeve until you hear a
‘click’. If you fail to properly secure
the sleeve, there is a possibility that
the head may come off in mid swing,
injuring either you or a bystander.

QTS SLEEVE PERFORMANCE GUIDE
Lateral range of adjustment depending on sleeve position
Flight can be adjusted laterally by approx. 37 yards
Select from 12 different positions to set your preferred face angle,
lie angle, and loft angle.
The sleeve is set to N (Neutral) at time of puchase.
Refer to the guide to set your preffered trajectory.
Approx. 37 yards Draw Fade
High trajectory Low trajectory

QTS SLEEVE PERFORMANCE GUIDE
Lateral range of adjustment depending on sleeve position
Flight can be adjusted laterally by approx. 37 yards
Select from 12 different positions to set your preferred face angle,
lie angle, and loft angle.
The sleeve is set to N (Neutral) at time of puchase.
Refer to the guide to set your preffered trajectory.
Approx. 37 yards Draw Fade
High trajectory Low trajectory

QTS SLEEVE POSITION OVERVIEW

QTS SLEEVE POSITION OVERVIEW

CARE AND STORAGE
Only remove the QTS sleeve when making adjustments. All parts
should remain properly installed at all other times, including when
the club is in storage, to ensure that no foreign objects or debris
become lodged in the sleeve connection or screw holes.
If the QTS sleeve becomes soiled with water, dirt, or other debris,
wipe them clean with a cotton swab or a soft, clean cloth.
When removing the QTS sleeve, be sure that you do so in a
clean location to ensure that no foreign objects or debris
become lodged inside.
It may even cause internal damage to the club head, adversely
affecting club performance.
Do not heat the QTS sleeve as it may damage the product.
Please be aware that attempts to remove the QTS sleeve or intentionally
disassembling it may not comply with the manufacturer’s warranty.
*For information on manufacturer’s warranty regulations, please refer to
the owner’s manual and warranty included with your golf club.
Avoid adjusting the QTS sleeve when the temperature is below
-5°C or above 45°C, as it may damage the sleeve.
experience, please be sure to follow these Important Precautions.
The manufacturer assumes no liability for injury or product damage due to failure to comply with the instructions herein.
Rules of Golf
You may not change the QTS sleeve position during a round.
SRIXON Z Series clubs conform with R&A and USGA-approved Rules of Golf. However, it
is against the rules to modify club performance during a round by changing the QTS
sleeve position to change the CG position, as this breaches the Rules of Golf regulation
4-2a, which states: “During a stipulated round, the playing characteristics of a club must
not be purposely changed by adjustment or by any other means.”
Important
Precautions To ensure a safe and satisfying golfing
Be sure to read the Important Precautions carefully and exercise appropriate care.

CARE AND STORAGE
Only remove the QTS sleeve when making adjustments. All parts
should remain properly installed at all other times, including when
the club is in storage, to ensure that no foreign objects or debris
become lodged in the sleeve connection or screw holes.
If the QTS sleeve becomes soiled with water, dirt, or other debris,
wipe them clean with a cotton swab or a soft, clean cloth.
When removing the QTS sleeve, be sure that you do so in a
clean location to ensure that no foreign objects or debris
become lodged inside.
It may even cause internal damage to the club head, adversely
affecting club performance.
Do not heat the QTS sleeve as it may damage the product.
Please be aware that attempts to remove the QTS sleeve or intentionally
disassembling it may not comply with the manufacturer’s warranty.
*For information on manufacturer’s warranty regulations, please refer to
the owner’s manual and warranty included with your golf club.
Avoid adjusting the QTS sleeve when the temperature is below
-5°C or above 45°C, as it may damage the sleeve.
experience, please be sure to follow these Important Precautions.
The manufacturer assumes no liability for injury or product damage due to failure to comply with the instructions herein.
Rules of Golf
You may not change the QTS sleeve position during a round.
SRIXON Z Series clubs conform with R&A and USGA-approved Rules of Golf. However, it
is against the rules to modify club performance during a round by changing the QTS
sleeve position to change the CG position, as this breaches the Rules of Golf regulation
4-2a, which states: “During a stipulated round, the playing characteristics of a club must
not be purposely changed by adjustment or by any other means.”
Important
Precautions To ensure a safe and satisfying golfing
Be sure to read the Important Precautions carefully and exercise appropriate care.