Stagg TIM JR 3/12-3/16 User manual

TIM JR 3/12-3/16
USER MANUAL

8.b
8.c
8.g
8.f
8.d
8.e
4
5
6
3
2
1
7.a/b

1. 12” or 16” bass drum head x 2 pcs
2. 12” or 16” bass drum shell x 1 pc + hoop x 2 pcs
3. Assembled 8” tom-tom x 1 pc
4. Assembled 10” snare drum x 1 pc
5. Seat of drum throne x 1 pc
6. 8” Cymbal x 1 pc
7. Drum pedal carton:
a. Beater x 1 pc
b. Pedal x 1 pc
8. Spare part carton:
a. Drum sticks x 1 pair
b. Tom-tom holder x 1 pc
c. Cymbal stand x 1 pc
d. Snare drum stand x 1 pc
e. Feet section of drum throne x 1 pc
f. Bass drum foot x 2 pcs
g. Bass drum lug x 8 pcs + spacer x 8 pcs
h. Drum key x 1 pc
FULL PART LIST:

1 2
Place the head with logo on the front side
of the bass drum.
Place the hoop onto the drum head.
a. Bass Drum
Hoops x 2 pcs
Bass drum head x 2 pcs
Bass drum
Tension rod
Spacers
Bass drum feet
Drum key
3
5
4
6
Screw the tension rod to the lug.
NOTE: DO NOT FULLY TIGHTEN
Use the drum key to tune the tension rod.
Note: Do not fully tighten one rod at a
time. Please tune rods in the diametrical
order as above. Repeat several times until
the tension of each rod is equal.
The higher tension you tune , the higher
pitch it would sound
Repeat the same procedure on the other side
until all rods are half screwed
Insert the legs to the leg bracket and
tighten
1st
2nd
3rd
4th

1 2
Pull open legs and tighten
Insert the basket arm to appropriate
height and tighten
Place the snare drum on basket You may adjust the snare by tuning the knob
b. Snare Drum
Basket arm
Stand - feet
Assembled snare drum
3
5
4
6
1. adjust the arm
to horizontal position
and tighten
3.loose the screw
and pull the arm
2. open the arms

1 2
Place the 8” tom-tom on the other side of
the holder and tighten
Insert the tom-tom holder to the holder
bracket and tighten
1. Unscrew the cymbal lock and leave single
felt on the holder
2. Place the cymbal on the single felt
Insert the cymbal arm to the holder
bracket and tighten
1. Place the cymbal between 2 felts.
2. Place the spacer on top of the felt.
3. Lock the cymbal
1. Insert the beater to the bracket
2. Connect the pedal to the bass drum
and tighten
3
5
4
6
c. Tom-tom & Cymbal arm & Pedal
Pedal
Beater

d. Drum Throne
1 2
Pull open the legs and tighten
Insert the tom-tom holder to the holder
bracket and tighten
Fit seat to the stand and tighten
Set the throne to appropriate height
and tighten
Seat Feet
Adjustable tube
3 4
Seat Feet
Adjustable tube

01-14