Stahl TEF 2882 User manual

Installation and operating manual
TEF2882 Navigation Light
Navigation Light
TEF 2882
Document properties (TUM7225)
Revision
Comment
Revision
date
Approved
0
First issue
21.01.2022
CS

Installation and operating manual
TEF2882 Navigation Light
Installation and operating manual
Contents
Document properties (TUM7225) ............................................................................................................................ 1
Warnings and risk levels.......................................................................................................................................... 3
General information................................................................................................................................................. 3
Marking and intended use ....................................................................................................................................... 4
Technical data ......................................................................................................................................................... 4
Product description.................................................................................................................................................. 4
Transport and storage ............................................................................................................................................. 4
Mounting and installation......................................................................................................................................... 5
Mounting ............................................................................................................................................................. 5
Positioning of lights ............................................................................................................................................. 6
Electrical connections ......................................................................................................................................... 6
Options and spare parts .......................................................................................................................................... 8
Disposal................................................................................................................................................................... 8
Compliance/Conformity ........................................................................................................................................... 9
Appendix #1........................................................................................................................................................... 10

Installation and operating manual
TEF2882 Navigation Light
Warnings and risk levels
DANGER
Non-compliance with the instruction results in risk of severe or fatal injuries to persons
WARNING
Non-compliance with the instruction may result in risk of severe or fatal injuries to persons
CAUTION
Non-compliance with the instruction may result in risk of injuries or damage to equipment
NOTICE
Non-compliance with the instruction may result in reduced lifetime of equipment, malfunctions etc.
General information
Before installation, make sure to read and understand this installation and operating manual.
Observe national assembly and installation regulations.
Always contact the manufacturer if anything is unclear, or if you notice any faults on the product or in this
document.
This installation and operating manual shall be available to anyone operating, installing, inspecting, modifying or
repairing the equipment.
Content in box
The TEF2882 navigation light –powered by K2W
Cable termination nut. One pc for simplex models and two pcs for duplex models
(except duplex models with single cable entry)
Installation instructions.
Product certificate (K2W)

Installation and operating manual
TEF2882 Navigation Light
Marking and intended use
CAUTION
Not intended for use in “these” conditions (Where mud may be present, on helidecks, underground, direct
sunlight, heavy vibrations, high risk of impact, harsh cleaning agents, high pressure washer etc.)
K2W –No.:0098
Technical data
Property
Material
Seawater resistant aluminium, borosilicate glass and stainless steel base.
Voltage
24V DC (21 –36 V DC)
Power
Max. 10W (Dependent on model)
Electrical connection
Wire cross section: 1.0 to 2.5mm2
Cable diameter: Ø9-16mm
Working hours
100,000 h (Each light source)
Operating temperature
-40°C to +55°C
Ingress protection
IP 66/67
Dimensions
Simplex models: 140 x 140 x 139 mm
(Excluding cable entry)
Duplex models: 140 x 140 x 139 mm
(Excluding cable entry)
Net weight
Simplex model: max 1,66 kg
Duplex model: max 1.75 kg
Product description
No maintenance is obtained through a simplified plug and play, modular design for ease of installation, and
unmatched availability self-monitoring capabilities.
Application
Observe national and class society assembly and installation regulations.
Observe national safety and accident prevention regulations.
Navigation light as stated in product type approval.
Signal light required by various national and canal authorities as stated in product type approval.
General signal light.
Transport and storage
Transport and store the equipment only in the original packaging
Store the equipment in a dry and vibration free place
Do not drop!

Installation and operating manual
TEF2882 Navigation Light
Mounting and installation
DANGER
Incorrect mounting and installation may lead to risk for falling objects, risk for electric shock or fire and risk for
equipment malfunction. In turn, this can lead to severe damage and/or injuries.
Mounting
See figure 1 & 2.
Fixing
The navigation light shall be fixed to a plane horizontal surface, by 4x M8 bolts. Maximum torque: 8 Nm. Ref.
figure 2 & figure 3.
Cable entries
Direction of cable entries; see figure 1. Ensure enough space to route cable and terminate cable properly.
Minimum space requirement: Cables bending radius + 50 mm.
Figure 1 (view from top)

Installation and operating manual
TEF2882 Navigation Light
Figure 2
Positioning of lights
Inboard screen is not required as the light itself fulfill the requirements. If an inboard screen is installed please follow
the following procedure:
Ref. COLREG 72, Annex I.
Electrical connections
Only qualified electrical personnel may install and start up the QPD components. For correct electrical termination
please follow the Phoenix user manual, Appendix 1 in the end of this user manual. Below is an excerpt of the
Phoenix user manual describing the main points of the procedure? Please note that the dust caps mounted on
lights connector sockets are not IP rated and will not protect against water intrusion.
Cable termination
Cable diameter: Ø9-16 mm.
Part # 2882xxx delivered as standard with terminal nut for Ø9-16 mm cable.
Wire cross section: 1.0 mm2 to 2.5 mm2.
Wire diameter incl. insulation: 2.0 mm to 3.80mm.
Connections
1. Strip approx. 60 mm off the cable.
2. Loop the PE conductor around the live conductors (1). As a result, the PE conductor will be pulled out of the
terminal block last if strong tension is exerted on the cable.
3. Insert the cable into the terminal nut.
4. Fix the wires in the conductor support of the splice body (2).
5. Cut off the wires with a diagonal cutter flush on the splice body (3).
6. When connecting the terminal nut to the light connector socket, make sure that their markings are aligned.

Installation and operating manual
TEF2882 Navigation Light
7. Screw the terminal nut together with the light connector socket (4). For this, we recommend using either the
socket wrench, a wrench, or a plier. Screw the terminal nut as far as it will go, or with the specified torque. It
must not be possible to unscrew the terminal nut again by hand.
8. Seal off any non-allocated connections using a protective cap.
Terminal #
1
+24V
2
-
3
-
N
0V
PE
Protective earth
Note: In order to obtain proper EMI, PE wire should always be terminated.

Installation and operating manual
TEF2882 Navigation Light
Options and spare parts
Image
Description
Part No
Cable termination nut Ø6 -11 mm
50500223
Cable termination nut Ø9-16 mm
50091435
Plug connector for cable Ø6 - 11 mm
-
Plug connector for cable Ø9-16 mm
Digital output (Alarm
output)
Protective cap for unused cable entries IP68
50500226
Breather plug M12 IP68
50091434
Blind plug M25
50091436
Standoff feet M8, set of 4 pcs
7247
Mounting adapter to 155 x 155 mm M10 hole
pattern
6694
Disposal
CAUTION
This equipment or part of this equipment is considered EE-Waste, and shall be handled accordingly
Observe national and local regulations and statutory regulations regarding disposal
Separate materials when sending it for recycling
Ensure environmentally friendly disposal of all components
No component or packaging shall end up in the ocean during any stage of the product’s lifetime

Installation and operating manual
TEF2882 Navigation Light
Compliance/Conformity
-IEC 60945 Cl. 4.5.3 “Compass safe distance” waived according to EN 14744 Cl. 4.8.8 “No
magnetic materials”
-IEC 60945 Cl. 8.8 “Rain and spray” omitted according to EN 14744 Cl. 5.3.6 “Covered by IP67”
-EN 60529:2013 –IP66/67
-MEDB000038Y (K2W)
-MEDD000019S (K2W)

Installation and operating manual
TEF2882 Navigation Light
Appendix #1