
Connection
Power+IGN+CAN
Recommended cable connector: JAE IL-AG5- 7S-S3C1
Recommended crimp contact: JAE IL-AG5-C1
Pin nr Function
1 CAN L
2 CAN H
3 CAN L
4 CAN H
5 0V
6 10-30V (R10 approval 9-16V)
7 Ignition. CSDS wakes up when this is > 7V
USB HDMI
Connector: USB Type A, high retention Connect to second image source
PCB connector: HDMI 1.4 compliant connector
Recommended cable connector: HDMI 1.4 compliant connector
Possible to use cable with locking screw
GMSL in GMSL out
Connect to infotainment head unit Connect to car display
PCB connector: Rosenberger D4S20D-40MA5-C PCB connector: Rosenberger D4S20D-40MA5-C
Recommended cable connector: Rosenberger HSD type C Recommended cable connector: Rosenberger HSD type C
CSDS Software
Operating system Compatible with Windows10 and Linux
USB CSDS presents itself as a HID compatible Touch display. It supports up to four simultaneous touch points and one
button (Home button)
HDMI CSDS presents itself as a HDMI 1.4 compatible display. Resolution and timing data are available as EDID data.
Resolution is 768x1024. Note that this diers from the standard 1024x768. Some Linux distributions might not support this
resolution without manual conguration.
Switch screens
To switch between screens double tap the button on the car display.
Compatible Products
For more information regarding connection to compatible products see:
www.standby.eu/support/manuals
Standby will not be held liable for improper installation or use of this product. Please follow all instructions provided. Professional advice and proper installation of the
Standby products by an authorized Standby Partner are recommended to provide maximum safety and function
Center Stack Display Switch - Manual
AM695302XXA www.standby.eu © Standby AB