Star Trac 8-RB User manual

ASSEMBLY
MANUAL
8-RB
Core Health & Fitness
Star Trac

Page 1
9-8130 8-RB Upright Bike
Overall Weight Width Length Height Max User Weight
178 lbs (81 kg) 28 in (71 cm) 66 in (168 cm) 52 in (132 cm) 0-350 lbs (0-159 kg)
All products may be covered by US and Foreign Patents and Patents Pending.
PRODUCT SPOTLIGHT

Page 2
SKU Description
718-5796-XX BEAUTY RING, UPRIGHT BIKE, 8-SERIES
720-5203-XX ASSY, HANDLEBAR, NO DISPL, E-RB
730-0889 SCREW,M8X1.25,20mm,SHCS,HK,SS,A-2,FT
718-5693 WASHER, M8, COUNTERBORE, COSMETIC
720-5054 ASSY, CONTACT HR, GRIP CABLE, RB PRO
720-5206 ASSY, CABLE, RB, HR EXT
120-3257 WASHER, M6, TEETH, 0.6 THICK
110-3916 SCREW,M6x1.0,25mm,SHC,H-
K,AS,Grd-12.9,NKL,FT
720-5233-XX ASSY, SEAT, E-RB, SUPPORTED
120-3326 WASHER, 10mm ID x 20mm OD X 2mm, SS
110-3917 SCREW,M10x1.5,12mm,HH-
C,HE,AS,Grd-12.9,NKL,FT
020-7434-XX PLASTIC, DISPLAY, REAR, BCS
120-3307 WASHER, M4, 4.3mm I.D. X 12mm O.D., ISO 7089
110-3402 SCREW, #8-18, 0.75”, HI-LOW, PHT, PH, CS, BO
701-0317-XX PLASTIC, DISPLAY, FRONT, LCD, ST, BCS, W/ IN-
SERTS
Required Tools:
• 6mm Allen Key
• 5mm Allen Key
• 17mm Socket
• #2 Phillips Screwdriver

Page 3
1. Thread the cable bundle through the beauty ring
(718-5796-XX) and up through the mast (720-
5203-XX).
NOTE: Ensure that the curved portion of the beauty
ring is facing in and down towards the shrouds.
2. Use a 6mm allen key to secure the mast assembly
to the frame using four (4) pieces each of the M8
x 20mm socket head cap screw (730-0889) and
M8 cosmetic counter-bore washer (718-5693).
3. Connect the HR cable inside the reading rack
(720-5054) to the corresponding connection
inside the mast (720-5206) installed in Step 2.

Page 4
4. Use a 5mm allen key to secure the reading rack
assembly to the mast using four (4) pieces each
of the M6 x 25mm socket head cap screw (110-
3916) and M6 tooth washer (120-3257).
5. Set the seat assembly (720-5233-XX) onto the
seat trolley assembly.
6. Using a 17mm socket, secure the seat assembly
onto the seat trolley using four (4) pieces each
of the M10 x 12mm hex head screw and M10 at
washer.

Page 5
7. Use a #2 phillips screwdriver to secure the back
console shroud to the console weldment using
eight (8) pieces of the #8-18 x 3/4” screw (110-
3402) and M4 washer (120-3307).
8. Refer to the documentation contained inside the
console box in order to connect the console to
the unit.
NOTE: Depending on which console was purchased,
the install instructions could dierent.
9. Use a #2 phillips screwdriver to secure the con-
sole front (701-0317-XX) to the back shroud using
eight (6) pieces of the #8-18 x 3/4” screw.

Page 6
The Support website provides a wealth of resources to help you get the best experience from your
unit. It is important to check the website periodically for Owner’s Manual and Installation Instruc-
tions, Service Bulletins, and other information. The resources include:
• Contact number and email for Technical Support
Go to https://support.corehandf.com/ for support information and information on all
Startrac products.
• Warranty information is available at: https://corehandf.com/warranty
• Updated Owner’s Manual, Assembly Manual, Service Manual, Service Bulletins,
Instructional Videos, and other information are at: https://support.corehandf.com/STBikes
Contact Information
CORE HEALTH & FITNESS
4400 NE 77th Avenue, Suite 300
Vancouver, WA 98662
Telephone: [phone]
http://www.corehandf.com
Customer Support
Contact your local distributor, or Core Health &
Fitness directly at: 1-800-503-1221
[e-mail]
Please supply the serial number of your unit and the date of purchase when you call. Use the space
in the boxes below to write down this information.
Serial Number
Date of Purchase
You may download the latest version of the Installation Guide, as well as view instructional videos,
by visiting the support website at:
https://support.corehandf.com/STBikes
SUPPORT AND SERVICE

© 2019 CORE HEALTH & FITNESS, LLC PART NUMBER 620-8383, REV C