Starfit 0927260060000 User manual

High precision pocket scale P.2
Balance de poche haute précision P.9
Balanza de precisión P.15
INSTRUCTIONS
MODE D’EMPLOI
INSTRUCCIONES DE USO

FEATURES / SPECIFICATIONS
• High precision strain gauge sensor
• LCD Blacklight
• Zero/tare
• Low battery/overload indicator
• Auto zero/auto o
TO REPLACE BATTERY
1.
2.
3.
INSTRUCTIONS FOR USE AND CARE
(Read the instructions before use)
3
0pen the battery compartment
located on the back of the scale.
Take out the used battery
(with the aid of a sharp object,
if needed).
Install new battery in the
compartment. (Please pay
attention to the polarity)
LCD
Tare Weight
Negative Value
Zero Weight
Ounces
Grams
Ozt
Dwt
BATTERY
1X3V CR2032 lithium battery (included)

1.
2.
3.
4.
Place the scale on a solid, flat surface.
Avoid carpet or other soft surfaces.
Press and release ON/OFF button to
switch on the unit.
Wait until display prompts to 0.00
before starting weighing.
Always place the object to weight in the
center of the platform.
TO OPERATE
4
ON/OFF

To weigh dierent loads consecutively without removing loads from
the scale, put the first load on the scale to obtain a weight reading.
Press Z/T button to reset the LCD reading to "0.00" before adding
next load. You can repeat this operation.
By pressing Z/T, you can see the total weight of all loads on the scale.
If you want to weigh more loads, just press Z/T to reset LCD reading
to "0.00" again.
5
6
You can press UNIT button to toggle the
weight measure between gram, oz, dwt
or ozt.
TO CHANGE THE UNIT OF WEIGHT MEASUREMENT
UNIT

To weigh dierent loads consecutively without removing loads from
the scale, put the first load on the scale to obtain a weight reading.
Press Z/T button to reset the LCD reading to "0.00" before adding
next load. You can repeat this operation.
By pressing Z/T, you can see the total weight of all loads on the scale.
If you want to weigh more loads, just press Z/T to reset LCD reading
to "0.00" again.
5
6
7
"ZERO" OR "TARE" FUNCTION
Z/T
Z/T

Auto shut-o occurs if display shows '0' or
shows the same weight reading for 2 minutes.
To maximize battery life, always press
ON/OFF to turn o the scale after using.
6
7
AUTO SHUT OFF
MANUAL SHUT OFF
ON/OFF
WARNING INDICATORS
1.
2.
Indicates Low battery power.
Replace new battery.
Indicates scale over load. Remove the
object to avoid damage. Maximum weight
capacity is indicated on the scale.
1.
2.

• Clean the scale with a slightly damp cloth. DO NOT immerse the
scale in water or use chemical/abrasive cleaning agents.
• The scale is high precision device. It is delicated built and extremely
sensitive.Please avoid dropping the unit or subject the unit to
violent impact which will damage it.
CLEANING AND CARE
8
SUBSCRIBE TO THE NEWSLETTER
TO LEARN MORE ABOUT OUR PROMOTIONS!
WWW. .COM
PRINTED IN CHINA FOR : ATLANTIC PROMOTIONS INC. LONGUEUIL (QUÉBEC) J4G 1V6
CUSTOMER SERVICE : 1-800-361-6232 / MTL AREA : [phone]