STARFRIT Balance User manual

Electronic Scale
Instructions for use

Step 1
Put the scale on a hard and flat surface. Avoid carpet or
soft surfaces.
Operation
1 x 3V lithium battery (CR2032).
Please remove the isolation sheet from the battery contact
before first use.
Open battery case cover on the back of scale.
Take out the used battery with the help of a sharp object,
as shown in picture.
Install new battery by putting one side of the battery
beneath the battery compartment and then pressing
down the other side.
Battery
To replace battery
1
2
3
Automatic shut off
When you step off the scale, it will automatically shut off.
Auto shut-off occurs if display shows the same weight
reading for approximately 8 seconds.
Step 2
Gently step on the scale, then the scale will automatically turn
on. Stand evenly on the scale without moving and wait until
your weight shown on display is stable and locked.