Starke sound VLOT User manual
USER GUIDE
Wireless Active Speaker System
Starke Sound Inc.
17810 S. Main Street, Suite B
Gardena, CA 90248
www.starkesound.com
VLOT
Safety instructions
1) Read, follow and keep these instructions
2) Do not remove the back panel or drivers as repairs require qualified technicians
3) Do not use the product near water
4) Do not install near heat sources such as radiators, heat registers, stoves or amplifiers
5) Clean the product only with a damp cloth
6) Use care when lifting or moving this heavy product
7) Protect the power cord from being walked on or pinched
8) Unplug during lightning storms or when unused for long periods of time
9) Ensure that no objects filled with liquids, such as vases, are placed on the product
3 years from purchase date
(Save original invoice for service to be arranged through your dealer, or contact us by
email if you purchased your amplifier online: service@starkesound.com)
Limited warranty
www.starkesound.com
1.0 What’s in the box 2.0 Placement
1.0 What’s in the box 2.0 Placement
①
③
②
⑥
④
⑤
1. 1 pair of speakers
2. 1 pair of grilles
3. 6 footers on which to mount the speakers
4. 1 power cord
5. 1 speaker cable
6. 1 Bluetooth antenna.
7. User guide
1. The control or active speaker is the Left speaker. When you face the speakers from the
listening position, be it should placed at left front.
2. The passive speaker is the Right speaker. It should be placed at right front.
3. If you have a subwoofer, you should connect it to the “SUB OUT” of the main speaker
with an RCA cable (user supplied). Place the subwoofer where it sounds best in your room
(eg, in a corner for more bass output; along a side wall for less output).
Main RightSubwoofer
1. Connect the Bluetooth antenna to the back panel of the control (Left) speaker.
2. Connect the power cord.
3. Connect the speaker cable from the Left speaker to the Right speaker
4. Power-on using the on/off switch on the back panel (top panel buttons will illuminate)
5. Press for 3 seconds (blue light will illuminate)
6. Press “F” to choose the input channel: Bluetooth (blue light), AUX (white light), OPTICAL
(red light), COAX (green light)
7. Power-off by pressing for 3 seconds (blue light will be off). You can also power-off
the speakers using the power switch on the back panel.
1. If you choose Bluetooth, the blue light will flash. Use your cell phone or other Bluetooth
device to search for, then discover “VLOT”. Press “connect”. When connected, the blue
light will be steady. Your connection format is indicated on the top panel: SBC, AAC, apt-X,
apt-X HD, or LDAC.
2. With Apple iPhone or iPad, the format will be AAC.
3. With an Android phone, go to Settings > System & updates > Developer options to view
the Bluetooth audio formats: SBC, apt-X, apt-X HD, or LDAC.
4. Press the “V+” or “V-” button to change volume.
5. Then play your favorite music!
1. Connect your RCA cables (AUX), Optical-fiber cable (OPT) or Coaxial cable (COAX) from
your CD-player, DVD player, Streamer or TV to the input of VLOT (L/R / OPT IN / COAX IN).
2. Press the “F” button to choose the desired input channel.
3. Press the “V+” or “V-” button to change volume.
4. Play your favorite content!
3.0 Set-up instructions 4.0 Bluetooth
5.0 AUX / OPTICAL / COAX
3.0 Set-up instructions 4.0 Bluetooth
apt-X HDapt-XAAC LDAC
SBC
FV+ V-
5.0 Bluetooth
Note: You can turn off your VLOT in any status. When
you turn on your VLOT again, VLOT will remember your
last settings (including input channel and volume).
6.0 Drawing 7.0 Technical Specifications
170mm
925mm
226mm
925mm
205mm
6.0 Drawing
Drivers
Amplifier
Max SPL output（1m）
Frequency response (±3dB)
Cabinet Structure
Input terminals
Recommended distance of bluetooth connection
Volume control
Input shifter
Mode Memory
Crossover
Sensetivity
Impedance
Bluetooch Chip
DAC Chip
Amplifier Chip
Power selector
Volt Switch
Power Consumption
Grille
Finish
Color options
Full size
Weight
Shipping size
Shipping weight
Warranty
1 inch tweeter 2 x 4 inches mid-bass
2 x 150W RMS
108dB
45Hz-25kHz
Ported
Bluetooth input
RCA stereo inputs, a pair
Coaxial input
Optical input
Power input (Control speaker)
Binding post inputs, a pair (Companion speaker)
less than 10 meters
Yes
Yes
Yes
3900Hz
90dB
4 ohms
CSR8675
ES9018K2M
TPA3255
Off/On
115V/230V
Standby: 4W Idle: 8.5W Maximum: 500W
Composite polymer
ABS Varnish
Black Satin / White Satin / Limited edition
H 36.4 x W 6.7 x D 8.9 inches (w/ foot)
H 925 x W 170 x D 226mm (Control speaker, w/ foot)
H 36.4 x W 6.7 x D 8.1 inches (w/ foot)
H 925 x W 170 x D 205mm (Companion speaker, w/ foot)
25.6 lbs/11.6kg (Control speaker)
20.3 lbs/9.2kg (Companion speaker)
L 43 x W 22.8 x H 11.4 inches (Pair)
L 1040 x W 580 x H 290mm (Pair)
62 lbs（28kg)
3 years (from original purchase date)
7.0 Technical Specifications
1 inch tweeter 2 x 4 inches mid-bass
2 x 150W RMS
108dB
45Hz-25kHz
Ported
Bluetooth input
RCA stereo inputs, a pair
Coaxial input
Optical input
Power input (Control speaker)
Binding post inputs, a pair (Companion speaker)
less than 10 meters
Yes
Yes
Yes
3900Hz
90dB
4 ohms
CSR8675
ES9018K2M
TPA3255
Off/On
115V/230V
Standby: 4W Idle: 8.5W Maximum: 500W
Composite polymer
ABS Varnish
Black Satin / White Satin / Limited edition
H 36.4 x W 6.7 x D 8.9 inches (w/ foot)
H 925 x W 170 x D 226mm (Control speaker, w/ foot)
H 36.4 x W 6.7 x D 8.1 inches (w/ foot)
H 925 x W 170 x D 205mm (Companion speaker, w/ foot)
25.6 lbs/11.6kg (Control speaker)
20.3 lbs/9.2kg (Companion speaker)
L 43 x W 22.8 x H 11.4 inches (Pair)
L 1040 x W 580 x H 290mm (Pair)
62 lbs（28kg)
3 years (from original purchase date)
Starke Sound will repair for the original owner any defect in materials or workmanship that occurs in
normal use of the speaker system, without charge for parts and labor, for 3 years from the date of
purchase.
It is your responsibility to use the product according to the instructions supplied, to provide safe and
secure transportation to an authorized Starke Sound service representative, and to present proof of
purchase from an authorized Starke Sound dealer in the form of your sales slip when requesting service.
Damage that results from abuse, misuse, accidents, shipping, repairs, or modifications by anyone other
than an authorized Starke Sound service representative is excluded from this warranty. This warranty is
void if the serial number has been removed or defaced.
This warranty gives you specific legal rights, and you may also have other rights that vary from state to
state.
If Service Seems Necessary
Contact the dealer from which you purchased the speaker system. If that is not possible, email us at:
service@starkesound.com
or write to:
Starke Sound, Inc.
ATTN: Service Department
17810 S. Main St. Ste. B, Gardena, CA 90248
We will promptly advise you of what action to take. If it is necessary to return your speaker system to the
factory, please ship it prepaid in the original factory packaging. Please note that Starke Sound will not
be held liable for shipping damage due to improper packaging. After it has been repaired, we will return
it freight prepaid in the U.S. or Canada.
For Europe Customers only
This symbol found on the product indicates that the product must not be disposed of with household waste. Instead, it may be
placed in a separate collection facility for electronic waste or returned to a retailer when purchasing similar product. The producer
paid to recycle this product. Doing this contributes to reuse and recycling, minimizes adverse effects on the environment and
human health and avoids any fines for incorrect disposal.
8.0 Limited warranty
8.0 Limited warranty
Table of contents
Other Starke sound Speakers manuals
