Starspace SKY-032 User manual

INSTRUCTION MANUAL
MODEL: SKY-032
Before you get started, a few pointers:
Contact us if you have
any issues
Mind the important
safety information
Having a friend to help
makes assembly extra-easy
SUBSCRIBE
STARSPACE CHAIR
Scan this QR Code to
watch our assembly
video for the chair.
CONTACT US
>>> [e-mail]
[phone]
www.starspacechair.com
ASSEMBLY GUIDE
PACKAGE LIST
ASSEMBLY INSTRUCTION
[A]
[A]
[G]
[G]
[G]
[K]
[K]
[K]
[B]
[B]
[G1]
[G1]
[G2]
[G2]
[G2]
[L]
[L]
[M] [M]
[C]
[C]
[D]
[D]
[H][E]
[E]
[I]
[I]
[F] [F]
[J]
[J]
Base Legs *5
Bolts M6*15mm *10
Star Base *1
M8 Bolts *4
Wrench *1
Seat Plate *1
Base Cover *1
1/4 Bolts *8Casters *5
Back Cushion *1Gas Lift *1
Seat Cushion *1Lift Cover *1
Arms *2
STEP 1
STEP 4
STEP 2
STEP 5
STEP 3 STEP 6
Connect Star Base(B) and Five
Base Legs(A) with Ten M6*15mm
Bolts(G), using the Wrench(L),
press the Base Cover(C) to the
Star Base.
Turn the Seat Cushion(I) upright
and align the center hole of the
seat plate over the lift, then push
the seat cushion down onto the
lift firmly until the connection is
secure.
Turn the Star Base(B) upside down,
then press the Casters(D) into the
holes at the end of each base leg,
insert the Lift(E) into the center
hole of the Star Base, the Lift
Cover(F) should be placed over the
Lift.
Attach the Arms(J) to the Seat
Cushion(I) with eight 1/4 Bolts (G2),
using the Wrench(L).
Align the Seat Plate(M) over the
pre-drilled holes underneath the
Seat Cushion(I), make sure that the
front of the seat plate is facing the
front of the Seat Cushion. Attach
the Seat Plate to the Seat Cushion
using Four Bolts(G1), tighten all
the bolts with the Wrench(L), being
careful not to miss-thread the
bolts or damaged the seat.
Press plastic covers(K) to the arm
holes.
Make sure all bolts and screws are fully tightened before
using chair. Lubricate all moving parts and tighten all bolts/
screws every 6 month or whenever needed.
CAUTION
Plastic Covers *8
Arm rests are labeled with an "L" (left)
or "R" (right) to show which sides they
should be placed on.
Tight bolts to 50% at the rst, after all
bolts were installed, tight all bolts to
100%.
NOTE
[L]
[L]
Congratulations, you are now the owner of a
brand new STARSPACE chair!
Following this assembly guide, you will
find a quick start guide to assemble your
STARSPACE chair. We highly recommend
checking out our Assembly Videos as well for
even more detailed and visual instructions.
If you run into any difficulty during the
assembly, remember to check out the
Assembly Video to see if you've missed
anything. If you're unable to resolve your
problems, drop us an email as well and our
support team will assist you.

SUBSCRIBE
STARSPACE CHAIR Scan this QR Code to
watch our assembly
video for the chair.
CONTACT US
>>> [e-mail]
[phone]
www.starspacechair.com
INSTRUCTION MANUAL
MODEL: SKY-032
SAFETY AND MAINTENANCE
SAFETY INFORMATION
LIMITED WARRANTY
Sit in the center of
the chair, with your
back to the backrest
Do not push the
chair around when a
person is sitting in it
Do not sit at the
front edge of the
chair
Do not push down on
the backrest when a
person is reclined
Do not stand on the
chair
Do not place all
your weight on the
backrest only
Do not use the chair
with more than one
person
Do not stand on the chair, Do Not use the chair as stepladder.
Use this product for seating one person at a time.
Do not use the chair unless all bolts and screws are rmly secured.
Avoid contact with sharp objects to prevent puncturing the fabric.
Every 6 months, check all bolts and screws to ensure they are tight.
To clean, spot clean only using a damp towel and mild cleaner,
rst test on a small, obscure area of fabric.
Chair weight limit not to exceed 250 lbs.
STARSPACE promises to repair or replace any STARSPACE chair
that is found to be defective in material or workmanship within one
year from the date of original purchase so long as you, the original
purchaser, still owns it. This is your sole and exclusive remedy. This
warranty is subject to the provisions below.
This warranty does not apply and no other warranty applies to:
EXCLUSIONS:
Normal wear and tear, which are to be expected over the course of
ownership.
Misuse, abuse or excessive use of the product.
Modications or attachments to the product that are not approved
by STARSPACE.
Products that were not installed, used, or maintained in accordance with
product instructions and warnings.
Products used for rental purposes or unauthorized retail activities.
Seating Usage: Normal use for seating is identied as the equivalent of
a single shift, forty- (40) hour workweek. To the extent that a seating
product is used in a manner exceeding this, the applicable warranty
period will be reduced in a pro-rata manner.
We adopt a 30 days return policy which means that all products
purchased on this website may be returned to us within the timeframe.
You need to contact us within 30 days after the product(s) came into your
possession and the product(s) must be returned to us without any undue
delays.
RETURN POLICY：
Contact us through the contact form on our website and attach the
invoice to the message as a proof of purchase. And please also write
the reason for return.
Returned products must be returned in the same condition as they
were sent and they must be sent in its original packaging.
We will then get back to you as soon as possible with information
on where to send the product(s).
If the product is not faulty, (i.e. if you changed your mind or if you are
unhappy with the product for some other reason), the cost of shipping
will fall on you. And it is your responsibility that the package arrives
safely to us so we recommend that you use a courier service that
oers shipment tracking.
As soon as we have received the product(s) and made an
inspection we will inform you of our decision.
If the product is faulty when you receive it please contact us and we
will help you out.
We reserve the right to give a partial refund in cases the product(s)
is not in an unused condition, is damaged or have missing parts not
due to our error.
HOW RETURNS WORK：
If a refund is approved we will automatically credit the purchase to
your credit card or original method of payment.
Before you get started, a few pointers:
Contact us if you have
any issues
Mind the important
safety information
Having a friend to help
makes assembly extra-easy
1
2
3
Adjustable Armrest
Tilt Tension: Long stem under
the seat cushion with knob
Operating the tilt lockout
Set the tilt tension to control the resistance you feel when leaning back.
While seated, turn knob
forward (toward + sign).
While seated, turn knob
backward (toward - sign).
+
-
>>> To decrease tension
>>> To increase tension
To stop your chair from tilting,
sit forward,then push the control
handle in.
To let your chair tilt back, pull
the control handle out.
INSTRUCTIONS FOR USE