StarTech.com USB433WACDB User manual

Manual Revision: 07/25/2014
For the most up-to-date information, please visit: www.startech.com
DE: Bedienungsanleitung - de.startech.com
FR: Guide de l'utilisateur - fr.startech.com
ES: Guía del usuario - es.startech.com
IT: Guida per l'uso - it.startech.com
NL: Gebruiksaanwijzing - nl.startech.com
PT: Guia do usuário - pt.startech.com
USB433WACDB
USB 2.0 to AC600 Dual Band MiniWireless-AC
Network Adapter - 802.11b/g/n/ac
*actual product may vary from photos

Instruction Manual
FCC Compliance Statement
This equipment has been tested and found to comply with the limits for a Class B digital
device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable
protection against harmful interference in a residential installation. This equipment generates,
uses and can radiate radio frequency energy and, if not installed and used in accordance with
the instructions, may cause harmful interference to radio communications. However, there
is no guarantee that interference will not occur in a particular installation. If this equipment
does cause harmful interference to radio or television reception, which can be determined by
turning the equipment o and on, the user is encouraged to try to correct the interference by
one or more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit dierent from that to which the receiver
is connected.
• Consult the dealer or an experienced radio/TV technician for help.
This device complies with part 15 of the FCC Rules. Operation is subject to the following two
conditions: (1) This device may not cause harmful interference, and (2) this device must accept
any interference received, including interference that may cause undesired operation.
Changes or modications not expressly approved by StarTech.com could void the user’s authority
to operate the equipment.
Industry Canada Statement
This Class B digital apparatus complies with Canadian ICES-003.
Cet appareil numérique de la classe [B] est conforme à la norme NMB-003 du Canada.
This device complies with Industry Canada licence-exempt RSS standard(s). Operation is subject
to the following two conditions: (1) This device may not cause interference, and (2) This device
must accept any interference, including interference that may cause undesired operation of the
device.
Le présent appareil est conforme aux CNR d’Industrie Canada applicables aux appareils radio
exempts de licence.
L’exploitation est autorisée aux deux conditions suivantes: (1) l’appareil ne doit pas produire de
brouillage, et (2) l’utilisateur de l’appareil doit accepter tout brouillage radioélectrique subi, même
si le brouillage est susceptible d’en compromettre le fonctionnement.
IC Radiation Exposure Statement:
This equipment complies with IC RSS-102 radiation exposure limit set forth for an uncontrolled
environment. This equipment should be installed and operated with minimum distance 0.5cm
between the radiator and your body.

Instruction Manual
2
Déclaration d’exposition à la radiation:
Cet équipement respecte les limites d’exposition aux rayonnements IC dénies pour un
environnement non contrôlé. Cet équipement doit être installé et mis en marche à une distance
minimale de 0.5cm qui sépare l’élément rayonnant de votre corps.
L’émetteur ne doit ni être utilisé avec une autre antenne ou un autre émetteur ni se trouver à leur
proximité.
FCC ID: NDD9578111305
IC: 11232A-USB433WACDB
Digital apparatus (ICES003)
CAN ICES-3 (B)/NMB-3(B)
Country Code Setting Disable
The Country Code Selection feature is disabled for products marketed in the US/Canada
Use of Trademarks, Registered Trademarks, and other Protected Names and Symbols
This manual may make reference to trademarks, registered trademarks, and other
protected names and/or symbols of third-party companies not related in any way to
StarTech.com. Where they occur these references are for illustrative purposes only and do not
represent an endorsement of a product or service by StarTech.com, or an endorsement of the
product(s) to which this manual applies by the third-party company in question. Regardless
of any direct acknowledgement elsewhere in the body of this document, StarTech.com hereby
acknowledges that all trademarks, registered trademarks, service marks, and other protected
names and/or symbols contained in this manual and related documents are the property of
their respective holders.

Instruction Manual
i
Table of Contents
Product Diagram ....................................................................................1
Overview ...................................................................................................................................................... 1
LED Indicator .............................................................................................................................................. 1
Introduction............................................................................................2
Packaging Contents ................................................................................................................................. 2
System Requirements.............................................................................................................................. 2
Installation ..............................................................................................2
Verifying Installation................................................................................................................................ 3
Operation ................................................................................................4
Specications..........................................................................................8
Technical Support ..................................................................................9
Warranty Information............................................................................9

Instruction Manual
1
Product Diagram
Overview
LED Indicator
Slow Flash – Waiting for connection
Quick Flash – Link established / Activity
WPS Button
Link / Activity LED

Instruction Manual
2
Introduction
Packaging Contents
• 1x USB Wireless Adapter
• 1x Driver CD
• 1x Instruction Manual
System Requirements
• Available USB port
• Windows® 8 / 8.1 (32/64bit), 7 (32/64), Vista(32/64), XP(32/64), Windows Server®
2012, 2008 R2, 2003(32/64), Mac OS® 10.7 and up (Tested up to 10.9)
Installation
Windows
1. Insert the included Driver CD into your CD/DVD drive.
2. Run the Setup.exe application from the Autoplay menu. If Autoplay is disabled on
your system, browse to your CD/DVD drive and run the application.
3. Follow the on-screen instructions to complete the installation.
NOTE: You may be prompted to restart once the install completes.
4. Connect the adapter to an available USB port.

Instruction Manual
3
Mac OS
1. Insert the provided CD into your DVD/CD-ROM drive.
2. Browse to the appropriate Mac OS version folder on the disc and run the Installer.
pkg application to start the install.
3. Follow the on-screen instructions to complete the installation.
NOTE: You may be prompted to restart once the install completes.
4. Connect the device to an available USB port.
Verifying Installation
Windows
1. Open the Device Manager by right-clicking on Computer, and then select Manage.
In the new Computer Management window, select Device Manager from the left
window panel (For Windows 8, open the Control Panel and select Device Manager).
2. Expand the “Network adapters”section. On a successful install, you should see the
following device in the list with no exclamation points or question marks.
Mac OS
1. Open the System Report by clicking the Apple symbol in the top left corner, selecting
About this Mac, then select System Report
2. Expand the “Hardware” section and click “USB” in the left column. With the adapter
connected, you should see the following device in the list.

Instruction Manual
4
Operation
Windows
Connecting to a wireless network is done through the Windows wireless conguration
utilities. You must know the name of the wireless network (SSID), the type of security
it is using (if any) and its associated password to connect to a wireless network.
Consult the documentation for your wireless access point (AP) or contact your network
administrator for details.
Depending on your version of Windows, you can display the list of available networks
using one of the following methods:
Windows 8
Move the cursor to the upper right corner
to open the Charms Bar, select Settings
and then select Wi
Windows 7 Click the network adapter tray icon
Windows Vista Click Start, then Connect To
Windows XP
Right-click the wireless adapter tray
icon and select View Available Wireless
Networks

Instruction Manual
5
Mac OS
Open the WLAN Dual Band Utility from the Applications folder. The following sections
outline the tabs in the utility and what they contain. Use the Available Network tab to
connect to a wireless network within range of the adapter.
Link Status Tab
Displays information related to the currently connected network.
Signal Strength – Strength of the link between the adapter and the connected AP.
Radio O – Disable the wireless radio.
Proles Tab
Add, Remove, Edit, Duplicate or Set Default wireless proles.

Instruction Manual
6
Available Networks Tab
Provides advanced conguration options for the device.
Preamble Mode:
Long - Higher quality but with lower performance than preamble short mode.
Short - Normal quality but with higher performance then preamble long mode.
Auto - Select the proper preamble mode by current signal frame information.
QoS Mode – Enable / Disable packet prioritization.
PSP Xlink Mode – Enable / Disable PSP Xlink support.
Fragment Threshold – Specify the size at which large packets should be fragmented.
RTS Threshold – Enable RTS/CTS for packets over the specied size.

Instruction Manual
7
WPS Tab
Allows for WPS PIN code or Push-button modes.
Information Tab
Displays utility and driver version information.

Instruction Manual
8
Specications
Host Interface USB 2.0
Chipset Realtek - RTL8811AU
External Connectors 1 x USB A Male
Supported Standards IEEE 802.11a, IEEE 802.11b, IEEE 802.11g,
IEEE 802.11n, IEEE 802.11ac Draft 2.0
Antenna Conguration 1x1:1 (TxR:S)
Wireless Frequencies 2.400GHz ~ 2.4835GHz
5.150GHz ~ 5.825GHz
Supported Security Schemes 64/128 bit WEP, WPA, WPA2 (TKIP/AES)
Operating Temperature 0°C ~ 40°C (32°F ~ 104°F)
Storage Temperature -20°C ~ 60°C (-4°F ~ 140°F)
Humidity 0~90% RH
Dimensions 35 x 16 x 8 mm
Weight 100 g
Compatible Operating Systems
Windows® 8 / 8.1 (32/64bit), 7 (32/64),
Vista(32/64), XP(32/64)
Windows Server® 2012, 2008 R2,
2003(32/64)
Mac OS® 10.7 and up (Tested up to 10.9)

Instruction Manual
9
Technical Support
StarTech.com’s lifetime technical support is an integral part of our commitment to
provide industry-leading solutions. If you ever need help with your product, visit
www.startech.com/support and access our comprehensive selection of online tools,
documentation, and downloads.
For the latest drivers/software, please visit www.startech.com/downloads
Warranty Information
This product is backed by a two year warranty.
In addition, StarTech.com warrants its products against defects in materials
and workmanship for the periods noted, following the initial date of purchase.
During this period, the products may be returned for repair, or replacement with
equivalent products at our discretion. The warranty covers parts and labor costs only.
StarTech.com does not warrant its products from defects or damages arising from
misuse, abuse, alteration, or normal wear and tear.
Limitation of Liability
In no event shall the liability of StarTech.com Ltd. and StarTech.com USA LLP (or their
ocers, directors, employees or agents) for any damages (whether direct or indirect,
special, punitive, incidental, consequential, or otherwise), loss of prots, loss of business,
or any pecuniary loss, arising out of or related to the use of the product exceed the
actual price paid for the product. Some states do not allow the exclusion or limitation
of incidental or consequential damages. If such laws apply, the limitations or exclusions
contained in this statement may not apply to you.

Hard-to-nd made easy. At StarTech.com, that isn’t a slogan. It’s a promise.
StarTech.com is your one-stop source for every connectivity part you need. From
the latest technology to legacy products — and all the parts that bridge the old and
new — we can help you nd the parts that connect your solutions.
We make it easy to locate the parts, and we quickly deliver them wherever they need
to go. Just talk to one of our tech advisors or visit our website. You’ll be connected to
the products you need in no time.
Visit www.startech.com for complete information on all StarTech.com products and
to access exclusive resources and time-saving tools.
StarTech.com is an ISO 9001 Registered manufacturer of connectivity and technology
parts. StarTech.com was founded in 1985 and has operations in the United States,
Canada, the United Kingdom and Taiwan servicing a worldwide market.