StarTech.com ARMPIVOTB2 User manual

Manual Revision: 09/13/2019
User Manual
For the latest information and specications visit
www.startech.com/ARMPIVOTB2
Desk-Mount Monitor Arm | Premium |
Silver
Actual product may vary from photos
SKU#: ARMPIVOTB2

1
To view manuals, videos, drivers, downloads, technical drawings, and more visit www.startech.com/support
Compliance Statements
Use of Trademarks, Registered Trademarks, and other
Protected Names and Symbols
This manual may make reference to trademarks, registered trademarks, and
other protected names and/or symbols of third-party companies not related in
any way to StarTech.com. Where they occur these references are for illustrative
purposes only and do not represent an endorsement of a product or service
by StarTech.com, or an endorsement of the product(s) to which this manual
applies by the third-party company in question. Regardless of any direct
acknowledgement elsewhere in the body of this document, StarTech.com
hereby acknowledges that all trademarks, registered trademarks, service marks,
and other protected names and/or symbols contained in this manual and
related documents are the property of their respective holders.

2
To view manuals, videos, drivers, downloads, technical drawings, and more visit www.startech.com/support
Warning Statements
• Make sure that you assemble this product according to the instructions.
• Do not exceed the weight capacity of this product. Overloading this product
might result in injury or property damage. This product can support the
following weight: 30.8 lb. (14 kg).
• This product is intended for indoor use only and should not be used
outdoors.
Varningsmeddelanden
• Se till att du monterar produkten i enlighet med instruktionerna.
• Överskrid inte produktens viktkapacitet. Överbelastning av produkten kan
orsaka skada på person eller egendom. Denna produkt har stöd för följande
vikter: 14 kg.
• Produkten är endast avsedd för användning inomhus och ska inte användas
utomhus.
Avertissements
• Assemblez ce produit conformément aux instructions.
• Ne dépassez pas la capacité pondérale du produit. Une surcharge du produit
peut entraîner des blessures ou des dommages matériels. Ce produit peut
supporter 14 kg.
• Ce produit est uniquement destiné à une utilisation en intérieur et ne doit
pas être utilisé à l’extérieur.
Warnhinweise
• Beachten Sie bei der Montage dieses Produkts die Montageanweisungen.
• Überschreiten Sie nicht die Tragkraft dieses Produkts. Ein Überladen dieses
Produkts kann zu Verletzungen oder zur Beschädigung des Produkts führen.
Dieses Produkt ist für folgendes Gewicht geeignet: 14 kg.
• Dieses Produkt ist nur zum Gebrauch in Innenräumen vorgesehen und sollte
nicht im Freien verwendet werden.
Dichiarazioni di avvertenza
• Assicurarsi di Assemblare il prodotto secondo le istruzioni.
• Non superare la capacità di carico del prodotto. Il sovraccarico del prodotto
potrebbe causare danni o lesioni. Il prodotto è in grado di supportare i
seguenti pesi: 14 kg.
• Il prodotto è destinato all’uso in ambienti interni. Se ne sconsiglia l’impiego
in ambienti esterni.
•

3
To view manuals, videos, drivers, downloads, technical drawings, and more visit www.startech.com/support
Mensagens de aviso
• Certique-se de que monta este produto de acordo com as instruções.
• Não exceda a capacidade de peso deste produto. Sobrecarregar este produto
pode resultar em ferimentos ou danos de propriedade. Este produto pode
suportar o seguinte peso: 14 kg.
• Este produto destina-se apenas a uma utilização no interior e não deve ser
utilizado no exterior.
Advertencias de uso
• Asegúrese de ensamblar este producto según las instrucciones.
• Asegúrese de no exceder la capacidad de peso de este producto. La
sobrecarga de este producto puede causar lesiones personales o daños en la
propiedad. Este producto tiene capicidad para el siguiente peso: 14 kg.
• El uso de este producto es solo para interiores y no debe utilizarse en
exteriores.
Waarschuwingen
• Zorg dat u dit product volgens de instructies in elkaar zet.
• Overschrijd de maximale capaciteit van dit product niet. Overbelasting
van dit product kan letsel of materiële schade veroorzaken. Dit product
ondersteunt het volgende gewicht: 14 kg.
• Dit product is alleen bedoeld voor binnengebruik en mag niet buiten
worden gebruikt.
注意
• 必ず取扱説明書に従って本製品の組み立てを行って下さい。
• 本製品で定められた最大積載重量を超えないようにして下さい。最大積載重量をオーバーした
場合、怪我をする恐れや器物破損の恐れがあります。 本製品は、モニター1台あたり14kgまで支
持できます。
• 本製品は、室内での使用を想定しています。戸外では使用しないで下さい。

4
To view manuals, videos, drivers, downloads, technical drawings, and more visit www.startech.com/support
Safety Statements
Safety Measures
• Cables (including power and charging cables) should be placed and routed
to avoid creating electric, tripping or safety hazards.
Mesures de sécurité
• Les câbles (y compris les câbles d’alimentation et de chargement) doivent
être placés et acheminés de façon à éviter tout risque électrique, de chute ou
de sécurité
安全対策
• ケーブル（電源ケーブルと充電ケーブルを含む）は、適切な配置と引き回し
を行い、電気障害やつまづきの危険性など、安全上のリスクを回避するよう
にしてください。
Misure di sicurezza
• I cavi (inclusi i cavi di alimentazione e di ricarica) devono essere posizionati
e stesi in modo da evitare pericoli di inciampo, rischi di scosse elettriche o
pericoli per la sicurezza.
Säkerhetsåtgärder
• Kablar (inklusive elkablar och laddningskablar) ska dras och placeras på så
sätt att risk för snubblingsolyckor och andra olyckor kan undvikas.

5
To view manuals, videos, drivers, downloads, technical drawings, and more visit www.startech.com/support
Table of Contents
Compliance Statements........................................................................1
Warning Statements..............................................................................2
Safety Statements..................................................................................4
Product Diagram....................................................................................6
Product Dimensions ..............................................................................7
Product Rotation....................................................................................8
Product Information .............................................................................9
Specications.............................................................................................................................................. 9
Package Contents ..................................................................................................................................... 10
Installation ..............................................................................................12
Using the Grommet Mount................................................................................................................... 12
Using the C-Clamp.................................................................................................................................... 14
Mounting the Monitor Arm................................................................................................................... 17
Attaching a Monitor Using the VESA Mount................................................................................... 19
Attaching an iMac Monitor.................................................................................................................... 20
Attaching the Monitor Mount.............................................................................................................. 24
Removing the Monitor Mount .............................................................26
Adjusting the Monitor Tilt ....................................................................26
Routing the Cables.................................................................................27

6
To view manuals, videos, drivers, downloads, technical drawings, and more visit www.startech.com/support
Product Diagram
1Support Pole 4Swivel Arm
2Cable-Management
Clip
5Monitor Mount
3C- Clamp
1
4
5
2
3

7
To view manuals, videos, drivers, downloads, technical drawings, and more visit www.startech.com/support
Product Dimensions

8
To view manuals, videos, drivers, downloads, technical drawings, and more visit www.startech.com/support
Product Rotation

9
To view manuals, videos, drivers, downloads, technical drawings, and more visit www.startech.com/support
Product Information
Specications
Type of measurement Measurement
VESA mounting hole pattern 75x75
100x100
Tilt +90 to -15
Screen size Maximum 30 in. (762 mm)
Rotate 360
Swivel 360
Weight/Load Capacity 30.8 lb. (14 kg)
Lift 7.87 in. (200 mm)

10
To view manuals, videos, drivers, downloads, technical drawings, and more visit www.startech.com/support
Package Contents
Monitor Mount
Qty: One
Swivel Arm
Qty: One
Support Pole w/ C-Clamp
Qty: One
Flange Mount
Qty: One

11
To view manuals, videos, drivers, downloads, technical drawings, and more visit www.startech.com/support
VESA Screws
Qty: Four
Torx Key
Qty: One
3 mm Hex Key
Qty: One
4 mm Hex Key
Qty: One
Access Card
Qty: One
Monitor Mount Screws
Qty: Two

12
To view manuals, videos, drivers, downloads, technical drawings, and more visit www.startech.com/support
Plastic Caps
Qty: Four
Installation
Using the Grommet Mount
1. Turn the Desk Mount over so that the Support Pole faces
downwards. Use the M3 Hex Keys to remove the four Hex
Screws that are holding the base of the Support Pole to the
C-Clamp.
Removing the Four Hex Screws

13
To view manuals, videos, drivers, downloads, technical drawings, and more visit www.startech.com/support
2. Use a Phillips Screwdriver (not included) to remove the
Screw from the Plate on the C-Clamp.
3. Remove the Plate, Two Washers, and the Knob from the
bottom of the C-Clamp.
Removing the Plate from the C-Clamp
4. Position the Support Pole over the Grommet Hole.
5. Slide the Plate (removed in step 3) through the Threaded
Rod on the Knob.
6. Place the Knob through the Grommet Hole in the desk or
table and into the Support Pole.
7. Turn the Knob clockwise to tighten it.

14
To view manuals, videos, drivers, downloads, technical drawings, and more visit www.startech.com/support
Using the C-Clamp
By default, the Desk Mount comes with the C-Clamp pre-
assembled. If you assembled the Grommet mount and want to
switch back to a C-Clamp.
Skip to step 5 if you do not have to reassemble the C-Clamp.
1. Insert the Knob through the hole in the C-Clamp.
Attaching the Knob to the C-Clamp
2. Place a Washer onto the Knob.

15
To view manuals, videos, drivers, downloads, technical drawings, and more visit www.startech.com/support
3. Place a Phillips Screw through a Round Washer, Plate, and
into the Washer on the Knob.
Assembling the C-Clamp
4. Turn the Desk Mount over and use one of the M3 Hex Keys
to insert four Hex Screws through the C-Clamp and into the
base of the Mount.

16
To view manuals, videos, drivers, downloads, technical drawings, and more visit www.startech.com/support
Attaching the Hex Screws to the C-Clamp
5. Using your hand, tighten the Knob until the C-Clamp is
pressed tightly against the mounting surface.
Securing the C-Clamp to the Mounting Surface

17
To view manuals, videos, drivers, downloads, technical drawings, and more visit www.startech.com/support
Note: You can adjust the size of the C-Clamp by removing
the two screws holding the upper and lower portions of the
clamp together and re-installing the screws into the lower
two screw holes.
Adjusting the C-Clamp
Mounting the Monitor Arm
1. Slide the Swivel Arm onto the Support Pole, so that the
Swivel Arm resting on the Cable-Management Clip.

18
To view manuals, videos, drivers, downloads, technical drawings, and more visit www.startech.com/support
Installing the Swivel Arm
2. Tighten the Swivel Arm using the Adjustment Screw
located on the side of the Swivel Arm. Be careful not to
over-tighten the Swivel Arm. The Swivel Arm should be
secure but free enough to rotate.

19
To view manuals, videos, drivers, downloads, technical drawings, and more visit www.startech.com/support
Attaching a Monitor Using the VESA Mount
1. Align the Mounting Holes (x 4) on the Monitor Mount with
the mounting holes on the back of the Monitor.
2. Insert the Thumb Screws through the Monitor Mount and
into the back of the Monitor.
Mounting the Monitor Using the VESA Mount
3. Using your ngers, tighten the Thumb Screws.
Warning! Do not over-tighten the screws. If you encounter
resistance while you’re tightening the screws, stop tightening.
Failure to do so could result in damage to the monitor.