StarTech.com ARMPIVOTHD User manual

Manual Revision: 06/27/2018
User Manual
For the latest information and specications visit
www.startech.com/ARMPIVOTHD
Single-Monitor Arm - One-Touch Height
Adjustment - Heavy Duty
SKU#: ARMPIVOTHD & ARMPIVOTHDB
Actual product may vary from photos

1
To view manuals, videos, drivers, downloads, technical drawings, and more visit www.startech.com/support
Compliance Statements
FCC Compliance Statement
This equipment has been tested and found to comply
with the limits for a Class B digital device, pursuant to part
15 of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference in a
residential installation. This equipment generates, uses and
can radiate radio frequency energy and, if not installed and
used in accordance with the instructions, may cause harmful
interference to radio communications. However, there is
no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference
to radio or television reception, which can be determined by
turning the equipment o and on, the user is encouraged to
try to correct the interference by one or more of the following
measures:
• Reorient or relocate the receiving antenna
• Increase the separation between the equipment and receiver
• Connect the equipment into an outlet on a circuit dierent
from that to which the receiver is connected
• Consult the dealer or an experienced radio/TV technician for
help
Use of Trademarks, Registered Trademarks, and other
Protected Names and Symbols
This manual may make reference to trademarks, registered
trademarks, and other protected names and/or symbols of
third-party companies not related in any way to StarTech.com.
Where they occur these references are for illustrative purposes
only and do not represent an endorsement of a product or

2
To view manuals, videos, drivers, downloads, technical drawings, and more visit www.startech.com/support
service by StarTech.com, or an endorsement of the product(s)
to which this manual applies by the third-party company
in question. Regardless of any direct acknowledgement
elsewhere in the body of this document, StarTech.com hereby
acknowledges that all trademarks, registered trademarks,
service marks, and other protected names and/or symbols
contained in this manual and related documents are the
property of their respective holders.

3
To view manuals, videos, drivers, downloads, technical drawings, and more visit www.startech.com/support
Safety Statements
Safety Measures
• Wiring terminations should not be made with the product and/or electric
lines under power.
• Product installation and/or mounting should be completed by a certied
professional as per the local safety and building code guidelines.
• Cables (including power and charging cables) should be placed and routed
to avoid creating electric, tripping or safety hazards.
Mesures de sécurité
• Les terminaisons de câblâge ne doivent pas être eectuées lorsque le produit
et/ou les câbles électriques sont sous tension.
• L’installation et/ou le montage du produit doit être réalisé par un
professionnel certié et dans le respect des normes locales et du code de
construction local.
• Les câbles (y compris les câbles d’alimentation et de chargement) doivent
être placés et acheminés de façon à éviter tout risque électrique, de chute ou
de sécurité
安全対策
• 電源が入っている状態の製品または電線の終端処理を行わないでください。
• 製品の設置やマウントは、使用地域の安全ガイドラインおよび建築基準に従い、有資格の専門業者が行うようにしてください。
• ケーブル（電源ケーブルと充電ケーブルを含む）は、適切な配置と引き回しを行い、電気障害やつまづきの危険性など、安全上のリスクを回避するよう
にしてください。
Misure di sicurezza
• I terminiali dei li elettrici non devono essere realizzate con il prodotto e/o le
linee elettriche sotto tensione.
• L’installazione e/o il montaggio dei prodotti devono essere eseguiti da un
tecnico professionale certicato che conosca le linee guida locali sulle norme
edilizie e sulla sicurezza.
• I cavi (inclusi i cavi di alimentazione e di ricarica) devono essere posizionati
e stesi in modo da evitare pericoli di inciampo, rischi di scosse elettriche o
pericoli per la sicurezza.
Säkerhetsåtgärder
• Montering av kabelavslutningar får inte göras när produkten och/eller
elledningarna är strömförda.
• Installation och/eller montering får endast göras av behöriga yrkespersoner
och enligt gällande lokala förordningar för säkerhet och byggnormer.
• Kablar (inklusive elkablar och laddningskablar) ska dras och placeras på så
sätt att risk för snubblingsolyckor och andra olyckor kan undvikas.

4
To view manuals, videos, drivers, downloads, technical drawings, and more visit www.startech.com/support
Warning Statements
Make sure to assemble this product according to the instructions. Failure to do
so might result in personal injury or property damage.
Make sure that the weight of the monitor doesn’t exceed the weight capacity of
this product. If you exceed the weight capacity, you might experience personal
injury or damage to the equipment. This product can support the following
weight: 19.8 lb. (9 kg).
Never operate this product if parts are missing or damaged.
Allowing any part of your component cables to get caught between moveable
parts might result in personal injury or damage to your equipment.
Varningsmeddelanden
Se till att du monterar produkten i enlighet med instruktionerna. Om du inte gör
det kan skada på person eller egendom uppstå.
Se till att skärmens vikt inte överstiger produktens viktkapacitet. Om
viktkapaciteten överstigs kan skada på person eller utrustning uppstå. Denna
produkt har stöd för följande vikter: 9 kg.
Använd aldrig produkten om delar saknas eller är skadade.
Om någon del av dina komponentkablar fastnar mellan rörliga delar kan skada
på person eller utrustning uppstå.
Avertissements
Assemblez ce produit conformément aux instructions. Si vous ne respectez pas
ces instructions, vous risquez de vous blesser ou d’endommager l’équipement.
Vériez que le poids du moniteur ne dépasse pas la capacité pondérale du
produit. Si vous dépassez la capacité pondérale, vous risquez des blessures
corporelles ou des dommages matériels. Ce produit peut supporter 9 kg.
N’utilisez pas ce produit si des pièces sont endommagées ou manquantes.
Si les câbles des composants se coincent entre des parties mobiles, vous risquez
des blessures corporelles ou des dommages matériels.
Warnhinweise
Montieren Sie dieses Produkt gemäß den Anweisungen. Anderenfalls kann dies
zu Verletzungen von Personen oder Schäden an Eigentum führen.
Das Gewicht des Monitors darf die zulässige Traglast des Produkts nicht
übersteigen. Wenn die Traglast überschritten wird, kann dies zu Verletzungen
von Personen oder Schäden an Geräten führen. Dieses Produkt ist für folgendes

5
To view manuals, videos, drivers, downloads, technical drawings, and more visit www.startech.com/support
Gewicht geeignet: 9 kg.
Das Produkt darf nicht bedient werden, wenn Teile fehlen oder beschädigt sind.
Wenn sich Komponentenkabel in beweglichen Teilen verfangen, kann dies zu
Verletzungen von Personen oder Schäden an Geräten führen.
Dichiarazioni di avvertenza
Assemblare il prodotto rispettando le istruzioni. Il mancato rispetto delle
istruzioni potrebbe causare danni a persone o proprietà.
Vericare che il peso del monitor non superi la capacità di supporto del
prodotto. In caso di superamento della capacità di supporto potrebbero
vericarsi danni a persone o apparecchiature. Il prodotto è in grado di
supportare i seguenti pesi: 9 kg.
Non utilizzare il prodotto in presenza di parti mancanti o danneggiate.
L’eventuale intrappolamento dei cavi del componente fra elementi in
movimento potrebbe causare danni a persone o apparecchiature.
Mensagens de aviso
Certique-se de que monta este produto de acordo com as instruções. O
incumprimento pode resultar em ferimentos pessoais ou danos de propriedade.
Certique-se de que o peso do monitor não excede a capacidade de peso deste
produto. Se exceder a capacidade de peso, pode sofrer ferimentos pessoais ou
danos no equipamento. Este produto pode suportar o seguinte peso: 9 kg.
Nunca opere este produto se faltarem peças ou estas estiverem danicadas.
Ao permitir que qualquer parte dos cabos do seu componente que preso
entre partes móveis, pode resultar em ferimentos pessoais ou danos no seu
equipamento.
Advertencias de uso
Asegúrese de ensamblar este producto según las instrucciones. De lo contrario,
pueden producirse lesiones personales o daños de propiedad.
Asegúrese de que el peso del monitor no exceda la capacidad de carga de
este producto. Si se excede dicha capacidad se podrían producirse lesiones
personales o daños al equipo. Este producto tiene capicidad para el siguiente
peso: 9 kg.
Nunca opere o ponga en funcionamiento este producto si faltan piezas o hay
daños en las mismas.
En caso de que los cables de su componente queden atascados en piezas en

6
To view manuals, videos, drivers, downloads, technical drawings, and more visit www.startech.com/support
movimiento se pueden producir lesiones personales o daños en el equipo.
Waarschuwingen
Zorg dat dit product volgens de instructies in elkaar wordt gezet. Indien dit niet
goed gebeurt kan lichamelijk letsel of materiële schade ontstaan.
Zorg dat het gewicht van het scherm de maximale capaciteit van dit product
niet overschrijdt. Als u de gewichtscapaciteit overschrijdt, kan persoonlijk letsel
of schade aan de apparatuur ontstaan. Dit product ondersteunt het volgende
gewicht: 9 kg.
Gebruik dit product nooit als er onderdelen ontbreken of beschadigd zijn.
Als uw componentkabels tussen bewegende delen vast komen te zitten, kan dit
lichamelijk letsel of schade aan de apparatuur veroorzaken.
注意
必ず取扱説明書に従って本製品の組み立てを行って下さい。取り扱いを誤った場
合に、傷害を負う恐れや物的損害が発生する恐れがあります。
取り付けるモニターの重量が、本製品で定められた最大積載重量を超えないよう
にして下さい。最大積載重量をオーバーした場合、傷害を負う恐れやモニターや
本製品に損害が発生する恐れがあります。本製品は、モニター1台あたり9kgまで
支持できます。
本製品で使用している部品の一部が紛失していたり損傷している状態で使用す
るのは絶対に止めて下さい。
ケーブルの一部が本製品の可動部に引っ掛かってしまった場合、傷害を負う恐れ
やモニターや本製品に損害が発生する恐れがあります。

7
To view manuals, videos, drivers, downloads, technical drawings, and more visit www.startech.com/support
Table of Contents
Compliance Statements........................................................................1
Safety Statements..................................................................................3
Warning Statements ..............................................................................4
Technical Specication..........................................................................8
Package Contents...................................................................................10
Requirements .........................................................................................13
Assembly .................................................................................................13
Use the Desk Clamp to Attach the Arm Mount.............................................................................. 13
Use the Grommet Mount to Attach the Arm Mount.................................................................... 14
Attach a Monitor........................................................................................................................................ 15
Adjust the Spring Arm...........................................................................17
Routing the Cables ................................................................................................................................... 17
Adjust the Position of the Arm Mount................................................18

8
To view manuals, videos, drivers, downloads, technical drawings, and more visit www.startech.com/support
Product Diagram
Spring Arm
VESA Monitor
Mount
Upper Cable
Cover
Lower Cable
Cover
Desk Clamp
Hex
Key
Holder

9
To view manuals, videos, drivers, downloads, technical drawings, and more visit www.startech.com/support
Product Dimensions
75 mm
100 mm
115 mm
75 mm
100 mm
115 mm
min 170 mm to max 505 mm
80 mmmin 255 mm to max 315 mm210 mm
min 10 mm to max 85 mm
100 mm

10
To view manuals, videos, drivers, downloads, technical drawings, and more visit www.startech.com/support
Technical Specication
Type of Measurement Measurement
VESA Mounting Hole Pattern
75x75
100x100
kg
Weight Capacity
Up to 9 kg (19.8 lb.)
Tilt
+90 to -90
Screen Size
Max 813 mm (32 in.)

11
To view manuals, videos, drivers, downloads, technical drawings, and more visit www.startech.com/support
Rotate
180
Swivel
180

12
To view manuals, videos, drivers, downloads, technical drawings, and more visit www.startech.com/support
Package Contents
Spring Arm
Qty: One
VESA Monitor Mount
Qty: One
Grommet Base Plate
Qty: One
Grommet Knob
Qty: One
Grommet Screw
Qty: One
Grommet Plate
Qty: One
12
34
56

13
To view manuals, videos, drivers, downloads, technical drawings, and more visit www.startech.com/support
Rubber Pads
Qty: Two
Desk Clamp
Qty: One
L Bracket
Qty: One
Clamp Screws
Qty: Five
Hex Key Holder
Qty: One
4 mm Hex Key
Qty: One
78
9 10
11 12

14
To view manuals, videos, drivers, downloads, technical drawings, and more visit www.startech.com/support
5 mm Hex Key
Qty: One
6 mm Hex Key
Qty: One
M4x12 mm Thumbscrews
Qty: Four
M5x12 mm Screws
Qty: Four
Washers
Qty: Four
Spacers
Qty: Four
User Manual
Qty: One
13 14
15 16
17 18
19

15
To view manuals, videos, drivers, downloads, technical drawings, and more visit www.startech.com/support
Requirements
Requirements are subject to change. For the latest
requirements, please visit www.StarTech.com/ARMPIVOTHD.
• Monitor/Display that is compatible with a VESA mount
• Phillips Screwdriver
Assembly
You can use either the desk clamp or grommet mount to attach
the Arm Mount to your mounting surface.
Use the Desk Clamp to Attach the Arm Mount
Warning! Make sure that the weight of the monitor doesn’t
exceed the weight capacity of this product, up to 9 kg (19.8
lb.). If you exceed the weight capacity, you might experience
personal injury or damage to the product.
1. Align the three holes on the top of the L Bracket (9) with the
holes on the underside of the Spring Arm’s (1) base.
2. Insert three of the Clamp Screws (10) through the L Bracket
and into the bottom of the Spring Arm.

16
To view manuals, videos, drivers, downloads, technical drawings, and more visit www.startech.com/support
3. Use the 4 mm Hex Key (12) to tighten the Clamp Screws.
(Figure 1)
Figure 1
Spring Arm
Base
L Bracket
Clamp Screw
4 mm Hex
Key

17
To view manuals, videos, drivers, downloads, technical drawings, and more visit www.startech.com/support
4. Remove the backing from the two Rubber Pads (7) and ax
the Rubber Pads to the tops of two of the Clamp Screws on
the underside of the L Bracket and Spring Arm. (Figure 2)
Figure 2
5. Depending on the thickness of your mounting surface, do
one of the following:
• If your mounting surface is between 10 and 55 mm (0.4
and 2.2 in)
a. Position the Desk Clamp (8) so that the holes on the Desk
Clamp line up with the top two holes in the L Bracket.
b. Insert two of the Clamp Screws through the L Bracket
and into the Desk Clamp.
L Bracket
Rubber Pad
Clamp Screw
Spring Arm
Base

18
To view manuals, videos, drivers, downloads, technical drawings, and more visit www.startech.com/support
c. Use the 4 mm Hex Key to tighten the Clamp Screws.
(Figure 3)
10 to 55 mm
Figure 3
4 mm Hex
Key
Clamp
Screw
L Bracket
Desk
Clamp

19
To view manuals, videos, drivers, downloads, technical drawings, and more visit www.startech.com/support
• If your mounting surface is between 50 and 85 mm (1.9
and 3.3 in)
a. Position the Desk Clamp (8) so that the holes on the Desk
Clamp line up with the bottom two holes in the L Bracket.
b. Insert two of the clamp screws through the L Bracket and
into the Desk Clamp.
c. Use the 4 mm Hex Key to tighten the Clamp Screws.
(Figure 4)
50 to 85 mm
Figure 4
4 mm Hex
Key
Clamp
Screw
L Bracket
Desk
Clamp