StarTech.com WALLSHELF8U User manual

Manual Revision: 05/29/2020
User Manual
For the latest information and specications visit
www.startech.com/WALLSHELF8U
Wall-Mount Rack with Built-in Shelf - 8U
Actual product may vary from photos
SKU#: WALLSHELF8U

1
To view manuals, videos, drivers, downloads, technical drawings, and more visit www.startech.com/support
Compliance Statements
Use of Trademarks, Registered Trademarks, and other
Protected Names and Symbols
This manual may make reference to trademarks, registered trademarks, and
other protected names and/or symbols of third-party companies not related in
any way to StarTech.com. Where they occur these references are for illustrative
purposes only and do not represent an endorsement of a product or service
by StarTech.com, or an endorsement of the product(s) to which this manual
applies by the third-party company in question. Regardless of any direct
acknowledgement elsewhere in the body of this document, StarTech.com
hereby acknowledges that all trademarks, registered trademarks, service marks,
and other protected names and/or symbols contained in this manual and
related documents are the property of their respective holders.
PHILLIPS® is a registered trademark of Phillips Screw Company in the United
States or other countries.

2
To view manuals, videos, drivers, downloads, technical drawings, and more visit www.startech.com/support
Warning Statements
Make sure to assemble this product according to the instructions. Failure to do
so might result in personal injury or property damage.
Make sure that the weight of the equipment doesn’t exceed the weight capacity
of this product. If you exceed the weight capacity, you might experience
personal injury or damage to the equipment. This product can support the
following weight: Up to 34 kg (75 lb.).
Never operate this product if parts are missing or damaged.
Wall structures vary, and it’s important to make sure that the type of wall
structure and mounting hardware that you’re using will properly support the
mounted equipment. Failure to do so may result in personal injury and/or
equipment damage. The wall structure should be capable of supporting at least
four times the weight of the mounted equipment.
The mounting hardware included with this product might not be adequate for
some wall structures. If you lack the necessary expertise to attach this product
to the wall structure that you’re using, contact a construction professional to
install the wall mount or to provide specic mounting instructions for your wall
structure.
Dichiarazioni di avvertenza
Assemblare il prodotto rispettando le istruzioni. Il mancato rispetto delle
istruzioni potrebbe causare danni a persone o proprietà.
Vericare che il peso dell’attrezzatura non superi la capacità di supporto del
prodotto. In caso di superamento della capacità di supporto potrebbero
vericarsi danni a persone o apparecchiature. Il prodotto è in grado di
supportare i seguenti pesi: 34 kg.
Non utilizzare il prodotto in presenza di parti mancanti o danneggiate.
Le caratteristiche dei muri sono variabili ed è importante vericare che la
struttura muraria e l’hardware di montaggio in uso siano in grado di supportare
adeguatamente le apparecchiature montate. Il mancato rispetto delle istruzioni
potrebbe causare danni a persone o proprietà. La struttura muraria deve
essere in grado di supportare un peso almeno quattro volte superiore a quello
dell’apparecchiatura montata.

3
To view manuals, videos, drivers, downloads, technical drawings, and more visit www.startech.com/support
L’hardware di montaggio incluso con il prodotto potrebbe non essere adeguato
ad alcune strutture murarie. Se l’utente non dispone delle competenze
necessarie per agganciare il prodotto alla struttura muraria in uso, dovrà
contattare un professionista edile per installare il supporto a parete o ottenere
istruzioni di montaggio per la struttura muraria in uso.
Avertissements
Assemblez ce produit conformément aux instructions. Si vous ne respectez pas
ces instructions, vous risquez de vous blesser ou d’endommager l’équipement.
Vériez que le poids de l’equipement ne dépasse pas la capacité pondérale
du produit. Si vous dépassez la capacité pondérale, vous risquez des blessures
corporelles ou des dommages matériels. Ce produit peut supporter de 34 kg.
N’utilisez pas ce produit si des pièces sont endommagées ou manquantes.
Les structures des murs varient. Vous devez impérativement vérier que le
type de mur et le matériel de xation que vous utilisez permettent de soutenir
correctement l’équipement. Dans le cas contraire, vous risquez des blessures
corporelles ou des dommages matériels. La structure du mur doit pouvoir
supporter au moins quatre fois le poids de l’équipement monté.
Le matériel de xation inclus avec ce produit n’est pas forcément approprié
pour toutes les structures de murs. Si vous ne disposez pas des compétences
nécessaires pour installer ce produit au mur, contactez un professionnel an
qu’il installe le support mural ou qu’il vous fournisse les instructions de montage
spéciques à votre structure de mur.
Warnhinweise
Montieren Sie dieses Produkt gemäß den Anweisungen. Anderenfalls kann dies
zu Verletzungen von Personen oder Schäden an Eigentum führen.
Das Gewicht des Ausrüstung darf die zulässige Traglast des Produkts nicht
übersteigen. Wenn die Traglast überschritten wird, kann dies zu Verletzungen
von Personen oder Schäden an Geräten führen. Dieses Produkt ist für folgendes
Gewicht geeignet: 34 kg.
Das Produkt darf nicht bedient werden, wenn Teile fehlen oder beschädigt sind.

4
To view manuals, videos, drivers, downloads, technical drawings, and more visit www.startech.com/support
Wandstrukturen unterscheiden sich, und es muss sichergestellt werden, dass
die Wand und das verwendete Montagematerial das montierte Gerät halten
kann. Anderenfalls kann dies zu Verletzungen von Personen und/oder Schäden
an Geräten führen. Die Wand muss mindestens das Vierfache des Gewichts des
montierten Geräts halten können.
Das mitgelieferte Montagematerial ist möglicherweise nicht für jede Wand
geeignet. Wenn Ihnen die nötigen Fachkenntnisse zum Anbringen dieses
Produkts an einer Wand fehlen, lassen Sie einen Fachmann den Wandhalter
anbringen, oder lassen Sie sich von einem Fachmann Montageanweisungen für
Ihre Wand erteilen.
Waarschuwingen
Zorg dat dit product volgens de instructies in elkaar wordt gezet. Indien dit niet
goed gebeurt kan lichamelijk letsel of materiële schade ontstaan.
Zorg dat het gewicht van de apparatuur de maximale capaciteit van dit product
niet overschrijdt. Als u de gewichtscapaciteit overschrijdt, kan persoonlijk letsel
of schade aan de apparatuur ontstaan. Dit product ondersteunt het volgende
gewicht: 34 kg.
Gebruik dit product nooit als er onderdelen ontbreken of beschadigd zijn.
Omdat wanden verschillen, is het belangrijk dat u ervoor zorgt dat het type
wandstructuur en de montagemiddelen die u gebruikt de gemonteerde
apparatuur goed ondersteunen. Indien u dit niet doet kan lichamelijk letsel
en/of schade aan de apparatuur ontstaan. De wandstructuur moet voldoende
zijn om ten minste vier keer het gewicht van de gemonteerde apparatuur te
ondersteunen.
De bij dit product geleverde montagemiddelen kunnen niet geschikt zijn voor
sommige wandstructuren. Als u onvoldoende kennis hebt om dit product
aan de door u gebruikte wandstructuur te bevestigen, neem dan contact op
met een bouwkundige om de steun aan de muur te installeren of specieke
montage-instructies voor uw wandstructuur te geven.
Varningsmeddelanden
Se till att du monterar produkten i enlighet med instruktionerna. Om du inte gör
det kan skada på person eller egendom uppstå.

5
To view manuals, videos, drivers, downloads, technical drawings, and more visit www.startech.com/support
Se till att utrustninging vikt inte överstiger produktens viktkapacitet. Om
viktkapaciteten överstigs kan skada på person eller utrustning uppstå. Denna
produkt har stöd för följande vikter: 34kg.
Använd aldrig produkten om delar saknas eller är skadade.
Eftersom väggstrukturer varierar är det viktigt att kontrollera att väggstrukturen
och monteringsutrustningen som du använder klarar av den monterade
utrustningen. Om du inte gör det kan skada på person och/eller utrustning
uppstå. Väggstrukturen ska kunna klara av minst fyra gånger vikten av den
monterade utrustningen.
Monteringsutrustningen som medföljer produkten kanske inte är lämplig
för vissa väggstrukturer. Om du saknar nödvändiga kunskaper för att fästa
denna produkt på väggstrukturen som du använder, kontakta en professionell
konstruktör för att installera väggmonteringen eller för att ge specika
monteringsinstruktioner för din väggstruktur.
Mensagens de aviso
Certique-se de que monta este produto de acordo com as instruções. O
incumprimento pode resultar em ferimentos pessoais ou danos de propriedade.
Certique-se de que o peso do equipamento não excede a capacidade de
peso deste produto. Se exceder a capacidade de peso, pode sofrer ferimentos
pessoais ou danos no equipamento. Este produto pode suportar o seguinte
peso: 34 kg.
Nunca opere este produto se faltarem peças ou estas estiverem danicadas.
As estruturas de parede variam e é importante certicar-se de que o tipo de
estrutura de parede e hardware de montagem que está a usar irá suportar
devidamente o equipamento montado. O incumprimento pode resultar
em ferimentos pessoais e/ou danos no equipamento. A estrutura de parede
deve ser capaz de suportar pelo menos quatro vezes o peso do equipamento
montado.
O hardware de montagem incluído com este produto pode não ser adequado
para algumas estruturas de parede. Se não tiver o conhecimento necessário
para xar este produto à estrutura de parede que está a usar, contacte um
prossional de construção para fazer a instalação em parede ou para fornecer
instruções de montagem especícas para a sua estrutura de parede.

6
To view manuals, videos, drivers, downloads, technical drawings, and more visit www.startech.com/support
Advertencias de uso
Asegúrese de ensamblar este producto según las instrucciones. De lo contrario,
pueden producirse lesiones personales o daños en la propiedad.
Asegúrese de que el peso del equipo no exceda la capacidad de carga de
este producto. Si se excede dicha capacidad se podrían producirse lesiones
personales o daños al equipo. Este producto tiene la siguiente capacidad de
carga: 34 kilogramos.
Nunca opere o ponga en funcionamiento este producto si faltan piezas o hay
daños en las mismas.
Las estructuras de las paredes pueden variar y, por tanto, es importante
determinar con certeza que el tipo de estructura de la pared y el hardware
de montaje que se va a utilizar puedan soportar debidamente el equipo. De
lo contrario, se pueden producir lesiones personales o daños en el mismo. La
estructura de la pared debe ser capaz de soportar al menos cuatro veces el peso
del componente instalado.
El hardware de montaje incluido con este producto puede no ser adecuado
para algunas estructuras de pared. Si no tiene la experiencia suciente para jar
este producto a la estructura de la pared correspondiente, póngase en contacto
con un profesional de la construcción para instalar el soporte de pared o para
que le proporcione las instrucciones especícas de montaje para su estructura
de pared.

7
To view manuals, videos, drivers, downloads, technical drawings, and more visit www.startech.com/support
Table of Contents
Compliance Statements........................................................................1
Warning Statements ..............................................................................2
Product Diagram ....................................................................................8
Front View.................................................................................................................................................... 8
Product Dimensions ..............................................................................9
Side View...................................................................................................................................................... 9
Front View.................................................................................................................................................... 10
Product Information ..............................................................................11
Package Contents ..................................................................................................................................... 11
Requirements ............................................................................................................................................. 13
Assembling the Wall Mount Rack........................................................13
Mounting the Wall Mount Rack ...........................................................17

8
To view manuals, videos, drivers, downloads, technical drawings, and more visit www.startech.com/support
Product Diagram
Front View
1Mounting Holes
2Back Plate
3Adjustment Rail
4Left Bracket
5Shelf Bracket
6Right Bracket
5
12
3
46

9
To view manuals, videos, drivers, downloads, technical drawings, and more visit www.startech.com/support
Product Dimensions
Side View

10
To view manuals, videos, drivers, downloads, technical drawings, and more visit www.startech.com/support
Front View

11
To view manuals, videos, drivers, downloads, technical drawings, and more visit www.startech.com/support
Product Information
Package Contents
Back Plate
Qty: 1
Right Bracket
Qty: 1
Left Bracket
Qty: 1
Shelf Bracket
Qty: 1

12
To view manuals, videos, drivers, downloads, technical drawings, and more visit www.startech.com/support
Adjustable Rails
Qty: 2
10-32 Assembly Screws
Qty: 16
10-32 mounting screws
Qty: 24
Mounting Template
Qty: 1
Wood Screws
Qty: 6

13
To view manuals, videos, drivers, downloads, technical drawings, and more visit www.startech.com/support
Requirements
For the latest requirements, please visit www.StarTech.com/
WALLSHELF8U.
Tools:
• Phillips®Head Screwdriver
• Level
Assembling the Wall Mount Rack
1. Line up the three Assembly Holes on the Left Bracket with
the Assembly Holes on the left side of the Back Plate.
Note: The Left and Right Brackets are marked with an L
(left) and R (right).
2. Insert three of the 10-32 Assembly Screws through the
Assembly Holes on the Left Bracket and into the back
plate, and tighten the screws in place.
3. Line up the three Assembly Holes on the Right Bracket
with the Assembly Holes on the right side of the Back
Plate.
4. Insert three of the 10-32 Assembly Screws through the
Assembly Holes on the Right Bracket and into the Back
Plate,
5. Using the Phillips Head Screwdriver, tighten the screws in
place.

14
To view manuals, videos, drivers, downloads, technical drawings, and more visit www.startech.com/support
Installing the Brackets to the Back Plate
6. Place the Shelf Bracket over the bottom edges of the Left
Bracket, Right Bracket, and Back Plate, making sure that
the Assembly Holes line up.
Installing the Shelf Bracket

15
To view manuals, videos, drivers, downloads, technical drawings, and more visit www.startech.com/support
7. Insert four of the 10-32 Assembly Screws through the holes
on the Shelf Bracket and into the Left and Right Brackets
and Back Plate,
8. Using the Phillips Head Screwdriver, tighten the screws in
place.
Securing the Shelf Bracket
9. Position the Adjustable Rails with the Left and Right
Brackets, and insert three or the 10-32 Assembly Screws
through the Slots on each of the Adjustable Rails and into
the Installation Holes on the Left and Right Brackets.

16
To view manuals, videos, drivers, downloads, technical drawings, and more visit www.startech.com/support
Attaching the Adjustable Rails
Note: The Adjustable Rails feature three slots that you can
use to extend or retract the rails.
Adjusting the Adjustable Rails

17
To view manuals, videos, drivers, downloads, technical drawings, and more visit www.startech.com/support
Mounting the Wall Mount Rack
Product mounting should be completed by a certied
professional as per the local safety and building code
guidelines.
Warnings! Before you mount the Wall Mount Rack, make
sure that the Mounting Surface is sturdy enough to support
the weight of the Wall Mount Rack 34 kg (75 lb.), plus the
weight of the equipment that you intend to install into the
Wall Mount Rack.
Wall structures vary, and it’s important to make sure that the
type of structure and mounting hardware that you are using
will properly support the mounted equipment. Failure to do
so may result in personal injury and/or equipment damage.
1. Remove the adhesive backing from the Mounting Template
and adhere the Mounting Template to the location on the
wall where you want to hang the Wall Mount Rack.
2. Wood Screws are provided with the Wall Mount Rack, but
the Wood Screws may not be the appropriate mounting
hardware for the type of wall you are using. Select the
mounting hardware that is appropriate for the material and
condition of the wall.
3. Hold the Wall Mount Rack against the wall (making sure
that it is level) and insert the mounting hardware through
the four mounting holes in the Wall Mount Rack and screw
them into the wall.
Note: The Wall Mount Rack has four mounting holes and
you must use all four of the mounting holes to properly
secure the Wall Mount Rack to the wall.

18
Warranty Information
This product is backed by a lifetime warranty.
For further information on product warranty terms and conditions, please refer
to www.startech.com/warranty.
Limitation of Liability
In no event shall the liability of StarTech.com Ltd. and StarTech.com USA LLP (or
their ocers, directors, employees or agents) for any damages (whether direct
or indirect, special, punitive, incidental, consequential, or otherwise), loss of
prots, loss of business, or any pecuniary loss, arising out of or related to the use
of the product exceed the actual price paid for the product.
Some states do not allow the exclusion or limitation of incidental or
consequential damages. If such laws apply, the limitations or exclusions
contained in this statement may not apply to you.
To view manuals, videos, drivers, downloads, technical drawings, and more visit www.startech.com/support
18

Hard-to-nd made easy. At StarTech.com, that isn’t a slogan.
It’s a promise.
StarTech.com is your one-stop source for every connectivity part you need.
From the latest technology to legacy products — and all the parts that bridge
the old and new — we can help you nd the parts that connect your solutions.
We make it easy to locate the parts, and we quickly deliver them wherever they
need to go. Just talk to one of our tech advisors or visit our website. You’ll be
connected to the products you need in no time.
Visit www.startech.com for complete information on all StarTech.com products
and to access exclusive resources and time-saving tools.
StarTech.com is an ISO 9001 Registered manufacturer of connectivity and
technology parts. StarTech.com was founded in 1985 and has operations in the
United States, Canada, the United Kingdom and Taiwan servicing a worldwide
market.
Reviews
Share your experiences using StarTech.com products, including product
applications and setup, what you love about the products, and areas for
improvement.
StarTech.com Ltd.
45 Artisans Cres.
London, Ontario
N5V 5E9
Canada
StarTech.com LLP
2500 Creekside Pkwy.
Lockbourne, Ohio
43137
U.S.A.
StarTech.com Ltd.
Unit B, Pinnacle
15 Gowerton Rd.,
Brackmills
Northampton
NN4 7BW
United Kingdom
FR: startech.com/fr
DE: startech.com/de
ES: startech.com/es
NL: startech.com/nl
IT: startech.com/it
JP: startech.com/jp
To view manuals, videos, drivers, downloads, technical drawings, and more visit www.startech.com/support