State Water Heaters Gas-Fired Water Heaters User manual

DURABILITY ON-DEMAND.
INTRODUCING A COMPLETE LINE OF ON-DEMAND
GAS-FIRED WATER HEATERS.
SRGBR00407 web.indd 1 1/23/08 4:08:09 PM

STATE ON-DEMAND
GAS WATER HEATERS.
Product Features:
Commercial
Application Features:
On-demand, or tankless, technology is not
new. It’s been in existence for about 30 years
in other parts of the world. Now State com-
bines this efficient technology with our rep-
utation for durability and rugged perform-
ance to bring a line of residential and com-
mercial tankless heaters to America.
State’s on-demand water heaters use a
high-fire burner to quickly raise the tem-
perature of water passing through a cop-
per heat exchanger. Only after the heater
senses the demand for hot water does the
burner initiate its ignition sequence,
ignite and begin to heat the flow of water.
All State on-demand heaters are gas-fired.
And because the burner is not ignited
until there is a demand for hot water,
they’re highly energy efficient.
Remember: on-demand water heaters are
designed for specific usage situations.
Consult your sales rep or contact State at
800-365-0024 for specifications and recom-
mendations regarding all State storage and
on-demand product applications.
The durability of State.
The convenience of continuous flow delivery.
Style
• Durable powder coated finish
• Smooth, pleasant lines and rounded corners
• Matching pipe cover available for finished appearance
Technology
• Interior and exterior installation options
• Continuous hot water on demand (up to 9.8 GPM)
• Whole house water heating solution
• Direct electronic ignition – no pilot light
• On-board diagnostics and safety monitoring
• Applicable for residential hydronic
heating applications
Durability
• Durable enough for 12-year limited warranty
on heat exchanger, 5-year warranty on all parts
• Tough enough to deliver endless hot water
• Durable enough to be installed outdoors,
saving valuable indoor square footage
Tankless Energy Efficiency
• Up to 84% thermal efficiency providing significant
energy cost savings
• Hot water capacity of 0.6 – 9.8 GPM
• Min. – Max. input: 19,000 – 237,000 BTU
• Max. temperature: 185°F with Commercial Controller
• Ideal for restaurants, multifamily housing, schools, hotels,
hair salons and spas, laundromats and car washes
• ASME models available
Choose from 16 different interior
and exterior models designed
specifically for Residential
or Commercial applications.
SRGBR00407 web.indd 2 1/23/08 4:08:11 PM

4
MODEL SELECTION GUIDE.
1 305 or 505 305 or 505 305 or 505
2 305 or 505 305 or 505 305 or 505
3 505 or 705 (2) 505 or 705 (2) 505
4 (2) 505 (2) 505 (2) 505
5 (2) 505 (2) 705 (2) 705
6 or more Multi-system Multi-system Multi-system
* Note: This Selection Guide is based on 120° F outlet water temperature.
Ground water
temperature factor.
The temperature of incoming ground
water (cold water inlet temperature)
varies greatly throughout the U.S. and
also fluctuates with change of season.
The temperature of water as it enters the
water heater will determine the amount
of “temperature rise” required to achieve
the desired hot water outlet temperature
(120°F is recommended).
The best way to measure your incoming
ground water temperature is to use a
thermometer to measure cold water tem-
perature during the coldest season
of the year. To simplify the process, use
this map to determine whether your
installation location is in the Southern
Zone, Central Zone or Northern Zone.
Peak hot water demand.
The next step is to determine how much
hot water will be required during its
busiest usage period (“peak demand”).
To use the chart, consider all appliances
and fixtures that use hot water, including
lavatory faucets, kitchen faucets, washing
machines, dishwashers, showers and bath-
tubs. Be sure to determine how
many appliances and fixtures will be used
at the same time during peak demand.
Average Ground Water Temperatures
SOUTHERN ZONE
Average Ground Water
Temperature: 62°F to 77°F
CENTRAL ZONE
Average Ground Water
Temperature: 52°F to 61°F
NORTHERN ZONE
Average Ground Water
Temperature: 37°F to 51°F
Ground Water Temperature Zone
Appliances or fixtures
in simultaneous use
during peak demand Southern Zone Central Zone Northern Zone
SRGBR00407 web.indd 3 1/23/08 4:08:13 PM

STATE DURABILITY
ON-DEMAND.
For more information on State On-Demand Water Heaters, contact:
State Water Heaters
500 Tennessee Waltz Parkway
Ashland City, TN 37015
800-365-0024 Toll-free USA
www.statewaterheaters.com
January 2008R
MODEL SPECIFICATIONS
BTU Input Approximate
Model Natural / Propane Hot Water Output (GPM) Shipping
Number Minimum Maximum Maximum 45º F Rise 77º F Rise Weight (lbs)
INTERIOR MODELS
GTS-305-NI 15,000 199,000/190,000 5.3 5.3 4.2 50
GTS-505-NI 15,000 199,000/190,000 8.5 7.4/7.1 4.2 50
GTS-705-NI 19,000 237,000 9.8 8.8 5.1 55
GTS-705-NIA* 19,000 237,000 9.8 8.8 5.1 55
For propane, change “N” to “P” in model number (GTS 305-PI).
* 705-NIA models are ASME Certified.
BTU Input Approximate
Model Natural / Propane Hot Water Output (GPM) Shipping
Number Minimum Maximum Maximum 45º F Rise 77º F Rise Weight (lbs)
EXTERIOR MODELS
GTS-305-NE 15,000 199,000 5.3 5.3 4.2 50
GTS-505-NE 15,000 199,000 8.5 7.3 4.2 50
GTS-705-NE 19,000 237,000 9.8 8.7 5.1 55
GTS-705-NEA* 19,000 237,000 9.8 8.7 5.1 55
For propane, change “N” to “P” in model number (GTS 305-PE).
* 705-NEA models are ASME Certified.
SRGBR00407
SRGBR00407 web.indd 4 1/23/08 4:08:14 PM