Steamfast Aurora SF-260 User manual

Aurora
TM
Steam Cleane
r
Model SF-260
by Top Innovations, Inc.
Please read instructions before use.
Mail in your warranty registration card.

Dear Valued Customer,
Thank you for purchasing your new Aurora
TM
Steam Cleaner. This
p
owerful new product places the cleaning power of steam in a compact and
portable appliance that easily rolls anywhere you need to clean.
Turn your Aurora
TM
on, and in minutes, you are ready to eliminate dirt,
grease, grime, stains, and more from most anywhere around your home. In
addition to removing dirt and grime, you will receive the many benefits that
steam provides. Hot steam refreshes upholstery and eliminates smoke and
other unpleasant odors, making furniture and carpets smell and feel like
new again. Use it in your living room, kitchen, bedrooms, bathrooms, and
anywhere else that you need to clean. And when you’re finished steaming,
the Aurora’s
TM
compact size makes it quick and convenient to store.
Top Innovations, Inc. would like to invite you to take advantage of our
Customer Support web site at:
www.topinnovations.com
On this website you will find additional information about many other
exciting Steam Fast products that are available, helpful tips on ways in
which you can utilize your Aurora
TM
, and other useful information to assist
you in maximizing the power of steam!
Enjoy your new Aurora
TM
Steam Cleaner!
Benny Lee
Chairman and CEO
Top Innovations, Inc.
L ETTER FROM THE CEO
2
To
p
Innovations
,
Inc.

1. DO NOT leave your SF-260 Aurora
TM
unattended when plugged in or not
in use.
2. This unit is not a toy. Close supervision is required when using
unit near children, pets, and plants. Steam produced by it is hot and
pressurized. Care must be taken to avoid burns or other injuries. Never
point nozzle at pets or people.
3. Always unplug electrical cord when unit is not in use. DO NOT use this
unit if electrical cord or outlet is damaged. DO NOT use unit if it is not
working properly or has been dropped, damaged, or left outdoors. If such
damage occurs, return unit to an approved service technician for repair.
4. This unit is an electrical appliance. DO NOT submerge it in water. DO
N
OT use Steam Hose or electrical cord as a handle. DO NOT allow cord or
Steam Hose to be crimped by closing them in doors. DO NOT pull or stretch
cord or Steam Hose around sharp corners or edges. Be sure to keep electrical
cord away from all heated surfaces.
5. DO NOT use this unit with extension cords or electrical outlets that have
inadequate current capacity. A three-prong outlet or a properly grounded
adapter is necessary when using SF-260 Aurora
TM
.
6. In order to unplug SF-260 Aurora
TM
, grasp plug and pull smoothly and
firmly from outlet. DO NOT attempt to unplug unit by pulling or tugging on
cord.
7. DO NOT use hot steam on cold glass, as this may cause glass to shatter.
SAVE THESE INSTRUCTIONS!
F OR HOUSEHOLD USE ONLY
I MPORTANT S AFEGUARDS
WARNING: To reduce the risk of fire, electrical shock, or
injury, the following basic safety precautions should always
be followed when using an electrical appliance.
READ ALL INSTRUCTIONS BEFORE USING YOUR STEAM CLEANER
3
To
p
Innovations
,
Inc.

8. DO NOT handle or use this unit while hands are wet or when not wearing
shoes. To avoid falls and other injuries, be sure to dry any wet areas on
floors and to stand away from damp surfaces while using steam cleaner.
9. SF-260 Aurora
TM
is only meant to be used with recommended SF-260
accessories. Other types of attachments such, as those used with vacuum
cleaners, are not to be used with Aurora
TM
. Doing so may cause injuries or
damage to unit.
10. Nozzles and attachments become hot during use. To avoid injuries, DO
N
OT touch nozzles while using this appliance. DO NOT attempt to change
attachments while unit is emitting steam.
11. DO NOT turn unit on its side when in use.
12. When filling your Aurora
TM
with water, DO NOT overfill Water
Reservoir.
13. Before filling unit with water, always take the following steps:
(1) Turn appliance off
(2) Unplug electrical cord
Failure to follow these steps may result in electric shock and injury.
14. Only water should be used in unit. Other cleaning agents will damage
unit and can cause injuries.
15. DO NOT operate unit if steam opening is blocked. Should this occur,
shut unit off and unplug.
16. Store your SF-260 Aurora
TM
in a cool, dry place. Allow unit to cool
completely, and always drain Water Reservoir before storing.
SAVE THESE INSTRUCTIONS!
F OR HOUSEHOLD USE ONLY
I MPORTANT S AFEGUARDS
WARNING: To reduce the risk of electric shock, this appliance
has a three-pronged plug. This plug will fit in a polarized wall
outlet only one way. If the plug does not fit fully in the outlet,
contact a qualified electrician to install a proper outlet. DO NOT
attempt to modify the plug or defeat this safety feature in any way.
4
To
p
Innovations
,
Inc.

5
To
p
Innovations
,
Inc.
SF-260 A URORA
TM
P RODUCT I NFORMATION
The following features and accessories come with your steam cleaner. Carefully inspect
p
ackaging material as some parts are shipped inside Styrofoam packaging. To obtain
p
ossible missing parts, refer to the Customer Support section on page 10 of this manual.
UNIT FEATURES AND
ACCESSORIES
1. Lighted On/Off Switch
2. Steam Ready Light
3. Water Reservoir
4. Water Reservoir Cap
5a. Rear Strap Tab
5b. Front Strap Tab
6. Grounded Power Cord
7a. Rolling Wheels
7b. Rolling Casters
8. Steam Hose
9. Handle
10. Steam Trigger
11. Main Steam Nozzle
12. Measuring Cup
13. Triangle Brush
14. Carrying Strap
15. Short Nylon Utility Brush
16. Long Nylon Utility Brush
17. Brass Utility Brush
18. Water Funnel
19. Steam Jet Nozzle

6
To
p
Innovations
,
Inc.
·The Lighted On/Off Switch (1) activates and deactivates the unit, and also provides a
clear visual indication of whether or not the unit is on.
·The Steam Ready Light (2) illuminates while the unit is heating and deactivates
when you are ready to begin steaming.
·The Water Reservoir (3) is the tank in which water is stored for use by the unit.
There must be a sufficient amount of water in the Water Reservoir in order for the
unit to function properly.
·The Water Reservoir Cap (4) securely covers the opening to the Water Reservoir,
safely containing the pressurized steam within the boiler. The Water Reservoir Cap
must be removed in order to fill the unit with water.
·The Rear Strap Tab (5a) and the Front Strap Tab (5b) are the hooks onto which the
Carrying Strap attaches.
·The Grounded Power Cord (6) provides exceptional mobility while protecting
against electric shock and injury.
·The Rolling Wheels (7a) allow the unit to be rolled along the ground, and in
conjunction with the front Rolling Casters (7b) provide exceptional convenience and
maneuverability.
·The Steam Hose (8) serves as the conduit for steam flow between the boiler and the
Main Steam Nozzle. It is designed to keep the steam safely contained while
allowing it to flow freely for powerful steam.
·The Handle (9) provides a safe and relatively cool place to grip the Main Steam
Nozzle.
·The Steam Trigger (10) is depressed to emit a spray of steam from the Main Steam
Nozzle. It is specially designed for maximum comfort and accessibility.
·The Main Steam Nozzle (11) emits a spray of hot, penetrating steam to encompass a
wide area. Either the Steam Jet Nozzle or Triangle Brush must be attached to the
Main Steam Nozzle in order for it to function safely and properly.
·The Measuring Cup (12) is designed to assist you in consistently filling the unit
with the optimum amount of water.
·The Triangle Brush (13) connects to the Main Steam Nozzle and is designed
specifically for cleaning corners and other difficult to reach areas.
·The Carrying Strap (14) allows you to safely and easily carry the Aurora
TM
over
stairs and other obstacles.
·The Short Nylon Utility Brush (15) and the Long Nylon Utility Brush (16) attach to
the Steam Jet Nozzle, and provide extra power for removing exceptionally tough
dirt and stains from surfaces.
·The Brass Utility Brush (17) attaches to the Steam Jet Nozzle and is designed
for removing tough stuck-on grease and grime from ovens and grills.
·The Water Funnel (18) assists you in filling the Water Reservoir quickly and neatly.
·The Steam Jet Nozzle (19) focuses the spray of steam from the Main Steam
Nozzle and also serves as the base to which the Utility Brushes connect.
SF-260 A URORA
TM
P RODUCT I NFORMATION

7
To
p
Innovations
,
Inc.
U SING THE A URORA
TM
FILLING WATER RESERVOIR
1. Place Aurora
TM
on a flat, level surface.
2. Make sure Lighted On/Off Switch is set to “Off” position and power cord is
unplugged from electrical outlet.
3. Press and hold Steam Trigger to ensure that any remaining steam has been
emitted from unit.
4. Allow unit to cool for at least 5 minutes.
5. Drain any water remaining in Water Reservoir from previous use.
CAUTION: Emptying unit before filling ensures that proper amount of
water is added. Too much water may cause excess water in steam and could
damage unit.
6. Unscrew Water Reservoir Cap.
7. Fill Measuring Cup to maximum fill line with water (16 oz.)
NOTE: To prolong lifetime of Aurora
TM
,we recommend using distilled or
de-mineralized water. DO NOT use any detergents or cleaning chemicals
inside Water Reservoir. Doing so may cause damage to unit.
8. Carefully pour water from Measuring Cup into Water Reservoir through
fill hole, using Water Funnel to avoid spilling water.
9. If desired, repeat steps 7 & 8 so that Water Reservoir is filled with a total of 32
oz. of water. See chart below for comparisons of amount of water versus
estimated amount of steam time.
10. Replace Water Reservoir Cap.
ATTACHING STEAM JET NOZZLE & TRIANGLE BRUSH
1. Depress red lock/release button on Main Steam Nozzle (FIGURE 1-A).
2. While still depressing lock/release button, slide Steam Jet Nozzle or Triangle
Brush over this button, so that rectangular hole in attachment aligns with
lock/release button (FIGURE 1-B).
3. Once lock/release button and rectangular hole are properly aligned, button
should click through hole and into place.
4. To remove Steam Jet Nozzle or Triangle Brush, press in red lock/release
button and pull attachment off of Main Steam Nozzle.
FIGURE 1
Amount of Water Steam Duration
8 oz. About 8 min.
16 oz. About 16 min.
32 oz. About 32 min.

8
To
p
Innovations
,
Inc.
U SING THE A URORA
TM
OPERATING STEAM CLEANER
NOTE: Be sure that Water Reservoir has already been filled and desired
attachments are connected before following these steps.
1. Plug power cord into a convenient electrical outlet.
CAUTION: This unit uses a grounded (3-prong) electrical plug. Use only
in properly installed 3-prong electrical outlets. Do not attempt to alter
plug or circumvent this safety feature in any way.
2. Switch Lighted On/Off Switch to “On” position.
3. Steam Ready Light will illuminate. Unit takes 6-8 minutes to heat up.
Once Steam Ready Light deactivates, unit is heated and ready for use.
4. Direct Steam Jet Nozzle (and any attachments) towards surface you
desire to steam, and press Steam Trigger.
CAUTION: Always be sure that Steam Jet Nozzle and any other
attachments are pointed in a safe direction (away from yourself, other
people, pets, and plants) before pressing Steam Trigger.
4. Keep Steam Trigger depressed for a constant stream of steam. Using a
slight back-and-forth motion over the area you are steaming will further
enhance the cleaning process.
5. Wipe steamed area off with clean cloth to remove loosened material.
Wiping while area is still wet is recommended, but use caution when
wiping surfaces such as metal that may still be hot.
6. Once steaming task is complete, immediately switch Lighted On/Off
Switch to “Off” position and unplug power cord from electrical outlet.
Follow steps under Proper Storage procedure on page 9 of this manual.
ATTACHING UTILITY BRUSHES
Short N
y
lon Utilit
y
Brush, Lon
g
N
y
lon Utilit
y
Brush, and Brass Utilit
y
Brush must all be attached to Steam Jet Nozzle attachment.
1. Align guide tab on inside of Utility Brush (FIGURE 1-A) with groove on
bottom of Steam Jet Nozzle tip (FIGURE 1-B), and firmly press Utility
Brush onto Steam Jet Nozzle.
2. Press Utility Brush as far back as possible to ensure it is properly seated
and to avoid any steam leakage (FIGURE 2).
3. To remove Utility Brush, simply grip it firmly and pull it off of Steam Jet
Nozzle.
FIGURE 1 FIGURE 2

9
To
p
Innovations
,
Inc.
PROPER STORAGE
Preparing your Aurora
TM
for storage is quick and simple. When you have finished
your steaming tasks, follow the steps listed below:
1. Switch Lighted On/Off Switch to “Off” position, and unplug power cord from
electrical outlet.
2. Allow unit to cool completely (at least 30 minutes).
3. Remove all attachments from unit.
4. Drain any remaining water in Water Reservoir into a sink or tub to prevent
overfilling during your next use. Flush out Water Reservoir with fresh water to
minimize potential mineral buildup in Water Reservoir.
5. Store all attachments safely away, preferably near Aurora
TM
.
6. Store Aurora
TM
in a cool, dry location.
C ARE AND S TORAGE G UIDELINES
REMOVING MINERAL BUILD-UP
One common problem with steam appliances is mineral build-up caused by high
mineral content in many municipal water supplies.
The best way to avoid this is to use de-mineralized or distilled water in unit.
If you are unable to use de-mineralized or distilled water, we recommend you use
this procedure monthly to help avoid mineral build-up:
1. Unplug power cord from electrical outlet and allow unit to completely cool.
2. Remove all attachments from unit.
3. Drain Water Reservoir into sink or tub.
4. Using Measuring Cup, make a mixture of 8 oz. vinegar and 8 oz. water.
5. Slowly pour water-vinegar solution into Water Reservoir.
6. Allow to stand for 40 minutes.
7. Drain water-vinegar solution from Water Reservoir.
8. Rinse Water Reservoir with fresh water and drain until vinegar odor dissipates.
9. Replace Water Reservoir Cap.

10
To
p
Innovations
,
Inc.
T ROUBLESHOOTING G UIDE
PROBLEM POSSIBLE CAUSE SOLUTION
Unit fails to steam.
Lighted On/Off Switch
does not illuminate.
Steamer is not plugged
in.
Plug into electrical
outlet.
Household Circuit
Breaker / Ground Fault
Interrupter has tripped or
blown a fuse.
Reset Circuit Breaker /
Ground Fault Interrupter,
or replace fuse. If you
need assistance, contact a
qualified electrician.
Unit fails to steam.
Lighted On/Off Switch
does illuminate.
Mineral buildup in unit.
Water Reservoir is
empty.
Follow Removing
Mineral Buildup
procedure on page 9 of
this manual.
Refill Water Reservoir
using procedures on page
7 of this manual.
Steam output is
intermittent.
Mineral buildup in unit. It is normal for unit to
periodically stop
steaming for a few
seconds. If steam stays
off for longer periods,
follow Removing
Mineral Buildup
procedure on page 9 of
this manual.
CUSTOMER SUPPORT
For problems with your steamer, please refer to the Troubleshooting Guide Located above.
Additional inquiries should be directed to our Customer Support services at 1-800-711-6617
ext. 102 / 130 or e-mailed to:
[email protected]
Should there be any missing or defective parts or accessories, contact Customer Support. In
most cases, it is not necessary to return the entire unit. We can ship most parts directly to your
door.
To ensure prompt and accurate service, call for a Return Authorization number before
returning any unit to Top Innovations. Failure to obtain a Return Authorization number
will cause a delay in warranty or out-of-warranty service requests.

W ARRANTY I NFORMATION
ONE YEAR LIMITED WARRANTY
(If outside USA, additional shipping charges may apply)
Top Innovations, Inc. warrants this
p
roduct to be free from defects in material
and workmanship for a period of one (1) year from the date of purchase. This
warranty does not cover damage caused by misuse, negligence, use by
improper current or voltage, use contrary to operating instructions or
disassembly, repair or alteration by any person other than Top Innovations,
Inc. Warranty Service Department.
Top Innovations, Inc. will repair or replace, at its option. This warranty gives
you specific legal rights and may have other rights, which may vary from
state to state.
Performance of any obligation under this warranty may be obtained by:
1. Call [phone] for Return Authorization Number before returning
for repair
2. Include copy of purchase receipt
3. Include your name, address, telephone number, and Return Authorization
Number on returned package
Please send product postage prepaid to:
TOP INNOVATIONS, INC.
WARRANTY SERVICE DEPARTMENT
400 NW PLATTE VALLEY DR.
RIVERSIDE, MO 64150
After 1 year limited warranty has expired, you will be advised of the cost of
repair before any servicing is done unless you enclose a note indicating that
you would like us to proceed with repairs.
If you have any questions about coverage under this warranty, you may
contact warranty service department by telephone at [phone] ext. 102
/
130 or e-mail custom[email protected]
11
To
p
Innovations
,
Inc.

Printed In China
Top Innovations, Inc.
400 NW Platte Valley Dr.
Riverside, MO 64150
Tel: [phone]
www.topinnovations.com
[email protected]
V030910