stellar labs 33-12725 User manual

Table of Contents
1.0 Introduction……………………………………………………..1
2.0 Specifications…………………………………………..………1
3.0 Package Contents……………………………………….……..2
4.0 Panel Descriptions……………………………………….….…2
5.0 Connection and Operation………….…………………….….3
HDMI REPEATER
Model # 33- 127 25
Distributed Exclusively by
www.mcmelectronics.com
MCM Electronics

HDMI REPEATER
１
HDMI REPEATER
DEAR CUSTOMER
Thank you for purchasing this product. For optimum performance and safety,
please read these instructions carefully before connecting, operating or adjusting
this product. Please keep this manual for future reference.
1.0 INTRODUCTION
The HDMI Repeater extends the length of any HDMI cable by regenerating the
HDMI signal before it sends the outputs to the HDMI monitor or projector. The
HDMI Repeater will remove digital noise (pixelation) from your picture. The input
of the HDMI repeater is connected with a long HDMI (male to male) cable from the
HDMI device like DVD player or Satellite set top box with a HDMI output port. The
HDMI repeater output is connected to a second HDMI (male to male) cable to go
from the output to any HDMI display or projector with a HDMI connector. The box
is placed near the display to remove any noise that has been generated by a long
HDMI cable.
1.1 FEATURES
This kind of the HDMI Repeater has many features that enable it to perform in a
superior manner. Among those features you will find:
zSupports HDMI1.2a.
zSupports highest video resolution 1080p.
zSupports 165MHz/1.65Gbps per channel (4.95Gbps all channel) bandwidth.
zSupports 8bit per channel (24bit all channel) deep color.
zHDCP pass-through.
zSupports uncompressed audio such as LPCM.
zSupports compressed audio such as DTS Digital, Dolby Digital（including
DTS-HD and Dolby True HD）.
2.0 SPECIFICATIONS
Signal Inputs/Output
Input Video Signal 5 Volts p-p (TTL)
Maximum Single Link Range 1920x1080P
Output Video HDMI1.2a
HDMI Input/Output Connector Type A 19 pin
Operating Frequency
Vertical Frequency Range 50/60Hz
Video Amplifier Bandwidth 1.65Gbps/165MHz
Resolutions(HDTV)
Interlaced(50&60Hz) 480i,576i,1080i
Progressive(50&60Hz) 480p,576p,720p,1080p
Mechanical

HDMI REPEATER
２
Size(H-W-D) 27mmW x 49mmH x 15mmD
Weight(Net) 0.017KGs
Warranty
Limited Warranty 1 Year Parts and Labor
Environmental
Operating Temperature 0 ℃to +70℃
Operating Humidity 10% to 85 % RH (no condensation)
Storage Temperature -10℃to +80℃
Storage Humidity 5% to 90 % RH (no condensation)
Power Requirement
External Power Supply 5V DC@2A(optional)
Power consumption (Max) 3W
Regulatory Approvals
Converter Unit FCC,CE,UL
Power Supply UL,CE,FCC
Accessories Adapter
AC Power Adapter US standard, UK standard and so on
User Manual
Note: Specifications are subject to change without notice.
3.0 Package Contents
Before attempting to use this unit, please check the packaging and make sure the
following items are contained in the shipping carton:
zHDMI Repeater
zUser's Manual
4.0 PANEL DESCRIPTION
1）HDMI input
2) Power input
3) HDMI output
1 23

HDMI REPEATER
３
5.0 CONNECTION AND OPERATION
1) Connect the source device output into input of the HDMI Repeater and
connect output of the HDMI Repeater to the HDMI display unit. The HDMI
Repeater is put close to the HDMI display unit (Input cables are optional)
*Please refer to connection diagram section.
2) Insert the DC side of 5v power supply if the 5v of the source is not enough.
Attention: Insert / Extract cable gently.
5.1 CONNECTION DIAGRAM
P/N0001