Stellar Lighting CL-XYD-L User manual
www.stellarlighting.co.uk
1
CL-XYD-L Motion-sensor night light
User manual
Technical specification
Model
CL-XYD-L
Main features
Motion-sensor activated, wireless and rechargeable night light with daylight
sensor and micro-USB charging port
Battery
3.7 V - 600 mA Lithium battery (micro-USB charging port)
Power
0.5 W
Light source type
SMD 2835 white LED
LED quantity (pcs)
6
CRI (Ra>):
>80
IP rating
IP 20
Light colour
White 3000 K / 4000 K / 6000 K
Luminous flux
30 lm +/- 5%
Light angle
120°
Sensor type
PIR sensor
Daylight sensor sensitivity
2-
Detection range
2 4.5 m
Detection angle
100°
Operation mode
On / Off / Auto (30 second auto-off)
Blocking time
0.2 sec
Operation time
6+ hours
Charge time
2-3 hours
Operating temperature
5°C - 30°C (25°C is the most optimal)
Material of housing
ABS + PC (Milky)
Product size
Ø 80 x 23 mm
Lifetime
50,000 hours
Warranty
2 years
Package dimensions
155 mm (L) x 118 mm (W) x 20 mm (H)
Weight with packaging
0.088 kg
www.stellarlighting.co.uk
2
CL-XYD-L Motion-sensor night light
User manual
Safety notices
Electrical work safety advice and tips
●Make sure the input voltage is correct.
●Avoid short-circuiting the unit, as it will burn the power supply or cause fire.
●Avoid placing the light in the rain, outdoors or in moist areas as it may damage or short-circuit the
device.
●Do not place the product into fire, open flame or hot surface as it may cause combustion or explosion.
●Do not open the LED light forinspection or re-wire the electronic circuits if you are not a professional.
Opening the light engine might void your warranty.
●Avoid using the device under -10°C and above 40°C temperature.
DIY tips and safety advice
●This task will involve working at height. A safe system of work should be established and maintained, in
order to prevent injury.
●Consider your safety! Think about the potential risks and dangers of the work and the steps you should
take to avoid them.
●Personal protective equipment. Make sure that you are equipped with suitable and sufficient personal
protectiveequipment.Thiscouldincludeeyeprotection,facemask,protectiveoveralls,safetyfootwear
and gloves.
●Ensure that the work area is sufficiently illuminated.
●Check that the tools you will be working with are in a good operating condition. For the installation,
you will need a cordless drill with drill bits or a screwdriver.
www.stellarlighting.co.uk
4
CL-XYD-L Motion-sensor night light
User manual
Installation options
Option 1: Hanging
Step 1: Fix the hook on the
vertical surface where you intend
to hang the light
Step 2: Ensure that the back plate
with the hanging hole is secured
safely at the back of the light
Step 3: Hang the light
Option 2: Free-standing
Place the light on a horizontal surface with the back plate secured at the back of the light
Option 3: Double-sided tape installation
Step 1: Wipe the mounting
surface clean and dry
Step 2: Remove the protective
cover from one side of the
double-sided adhesive disc and
attach to the back of the light
Step 3: Remove the protective
cover from the other side of the
double-sided adhesive disc and
attach the light to the mounting
surface
www.stellarlighting.co.uk
5
CL-XYD-L Motion-sensor night light
User manual
Operation
•Change between the three modes with the slide-switch
oOFF: centre position, the light is off
oON: the light is permanently on
oAUTO: the light is in motion sensor mode with daylight sensor. Once triggered, the light stays
on for 30 seconds in the area exceeds
2-3 LUX!
•The light can be charged via the micro-USB port
•Recharge, once the brightness of the light starts fading
•The indicator light turns red while charging and changes to blue, once fully charged.
Application areas
The CL-XYD-L motion-sensor activated, wires night lights have a wide range of applications. All you need is a
surface to secure the lights to.
Hallway
Stairway
Wardrobe
Cabinet
Bathroom
Table of contents
