Stellina ST80 User manual

STELLINA ST80
Instruction Manual v1.0 EN 2018-03

Stellina Instruction Manual v1.0 EN 2018-03 1
Table of Contents
I. Package contents.............................................................................................................................. 2
II. Product presentation........................................................................................................................ 2
III. Warnings......................................................................................................................................... 2
IV. Installation....................................................................................................................................... 3
Positioning the tripod.................................................................................................................. 3
Installing Stellina........................................................................................................................ 4
Installation of the power supply.................................................................................................. 4
Mains AC power supply.................................................................................................... 4
External battery................................................................................................................ 5
V. Operation......................................................................................................................................... 5
Getting started............................................................................................................................ 5
Connecting to Stellina................................................................................................................ 6
Control from the mobile app………............................................................................................ 6
Stopping Stellina........................................................................................................................ 6
VI. Care and maintenance.................................................................................................................... 6
VII. Transport and storage.................................................................................................................... 6
VIII. Technical characteristics............................................................................................................... 7
IX. Warranty......................................................................................................................................... 7
X. Regulatory compliance.................................................................................................................... 8
EU declaration of conformity...................................................................................................... 8
FCC Statement........................................................................................................................... 8
XI. Disposal and recycling.................................................................................................................... 9

Stellina Instruction Manual v1.0 EN 2018-03 2
I. Package contents
The original packaging contains the following elements:
1 Stellina telescope
1 tripod
3 tripod accessories (1 lot of ovoid rubber feet, 1 lot of spiked feet, clamping tools)
We recommend that you keep your telescope's original packaging so that it can be used for storing the
telescope when not in use.
II. Product presentation
Stellina is a new generation telescope: compact, intuitive, smart and connected. With its multiple features,
it allows you to discover and share with your family and friends the marvels of the night sky.
Due to its compact dimensions and optimized weight, the telescope is easy to carry in a hiking or cabin
bag. Its exceptional ease of use offers the user an unforgettable viewing experience whatever the
conditions.
Once installed on its levelled tripod, Stellina unfolds and automatically geolocalizes itself. It can be powered
by an external battery or an external power adapter (not supplied).
As soon as you have connected to the telescope, you can browse the mobile application on your
smartphone or tablet and choose an object among the catalogue. Stellina is remotely controlled thanks to
our Stellinapp and in a few minutes, the telescope is ready to photograph your chosen deep sky object.
Thanks to its built-in computer, Stellina pushes the limits of embedded intelligence by automatically
managing star alignment, pointing and tracking of stars, image processing and application updates. The
telescope also uses live stacking technology to provide images of optimal quality.
With an Internet connection on your mobile device you will have the opportunity to instantly share your
photos on social networks and interact with the community of Stellina users around the world to improve
your skills.
III. Warnings
Before use, please read these operating instructions carefully and observe all the precautions and
warnings.
Keep the documentation in a place that is easy to access and ensure that all users read it.
If you give or lend the device to another person, be sure to send them the instruction manual.
The content of this document is subject to change. For the latest instructions on using this product, please
refer to the manual available online at https://vaonis.com/documents
If you have any questions about your product, please go to our website https://www.vaonis.com or send
an e-mail to [e-mail]

Stellina Instruction Manual v1.0 EN 2018-03 3
- Stellina should never be pointed at the sun without an adequate filter placed on the lens.
- When using an external power adapter, you are responsible for its proper use. You must therefore
respect all the usage recommendations made by the manufacturer of the adapter. Vaonis can not
be held responsible for any damage caused by a mains AC power supply.
- External batteries used for powering Stellina must comply with French and European regulations.
Vaonis can not be held responsible for any damage caused by an external power supply that does
not comply with the specifications detailed in Section VIII. Technical characteristics.
- This instrument is composed of fragile optical, mechanical and electronic elements. Keep the
instrument as safe as possible from shock and vibration to improve the lifespan of your Stellina.
- Do not open the device. Do not attempt to disassemble, modify or repair the unit as this may void
the warranty. Contact support by email at [e-mail]
- Use only the accessories supplied by Vaonis and respect the conditions of use recommended by
Vaonis.
- Unplug the device during lightning storms or when unused for long periods of time.
- Only use the product at temperatures between -20°C and 40°C.
- Store the product in a clean and dry place.
- Do not immerse the product in water.
- Stellina is not a toy.
- The product is not intended for use by children under 14 years of age.
- The device can be used by children aged 14 or older and by persons with reduced physical,
sensory or mental capacity or lack of experience or knowledge, if they are properly supervised or
if instructions for the safe use of the device have been given to them and the risks involved have
been fully understood.
- Children must not play with the device.
- Cleaning and maintenance by the user should not be performed by unattended children.
- Do not use chemical solvents (e.g. alcohol, solvent, thinner) or other flammable cleaning fluids to
clean the product.
IV. Installation
Positioning the tripod
1. Look for the flattest and hardest ground possible. Avoid stony or loose soil to ensure maximum
stability.

Stellina Instruction Manual v1.0 EN 2018-03 4
2. Unfold the legs of the tripod and lock them in the desired position thanks to the integrated
adjustment system.
3. Level the tripod by using the bubble level and adjustable legs. To do this, unscrew the rubber
knobs, move in or out a leg at a time and then tighten each knob to fix the leg in position.
4. To make sure the tripod is stable, apply vertical pressure to the top of the tripod.
If it does not move, you can go to the next step. If not, move the tripod and try again on more
stable ground.
5. Once securely in place, make sure that the locking lever on the mounting plate is loosened to
ensure easy assembly.
Installing Stellina
1. Lift Stellina by its black sides, with the telescope’s supporting base facing downwards.
2. Check that the tripod mounting plate is securely attached to the Stellina’s base.
3. Hold the telescope upright and place it on the tripod, making sure that the Stellina mounting is
centered in relation to the tripod head. You must hear a "click" corresponding to the safety pin
engaging which ensures the correct attachment of Stellina.
4. For the instrument to be stable, you need to tighten the locking lever on the mounting plate. If any
play persists, tighten this lever again using the notches on the knob for leverage.
Installation of the power supply
Stellina requires a power source delivering at least 5.1 +/- 0.1V and at least 2.4A on a USB Type-C
connector.
For that, two solutions exist: - an external power adapter
- an external battery
Mains AC external power adapter (not supplied):
1. Plug the external power adapter into the AC outlet and the USB Type-C plug into the dedicated
USB port behind the battery compartment cover on the side of Stellina.
2. Once everything is connected, a red indicator will come on for 5 seconds to confirm that the power
is plugged in and working.
3. Then close the compartment cover and pass the cable through the dedicated hole to ensure the
protection of the connectors.
If Stellina is powered by an external power adapter, the AC socket outlet must be installed
near the equipment and must be easily accessible.

Stellina Instruction Manual v1.0 EN 2018-03 5
Provide sufficient cable length to allow a 360° rotation of Stellina. A cable that is too tight
could damage the connectors and/or the motorization of the instrument.
Make sure that the power cable can not get caught on any external elements.
For increased security concerning the electrical connection, make sure that the external
power adapter can not come in contact with liquids or other conductive elements.
External battery (not supplied):
Case 1: The external battery fits in the battery compartment.
1. Connect the cable to the USB socket of your external battery and then to the dedicated Type-
C port. A red indicator will come on for 5 seconds to confirm that the power is on and functional.
2. Once the battery is connected, close the flap to keep it firmly in place.
Case 2: The external battery does not fit in the battery compartment.
1. Connect the cable to the USB jack of your external battery pack located near Stellina and then
to the dedicated Type-C port. A red indicator will come on for 5 seconds to confirm that the power
is on and functional.
2. Once the battery is connected, close the compartment cover and pass the cable through the
dedicated hole to ensure the protection of the connectors.
If Stellina is powered by an external battery, it must comply with the IEC 62133 standard.
Provide sufficient cable length to allow a 360° rotation of Stellina. A cable that is too tight
could damage the connectors and/or the motorization of the instrument.
Make sure that the power cable can not get caught on any external elements.
For increased security concerning the electrical connection, make sure that the external
battery can not come in contact with liquids or other conductive elements.
V. Operation
Getting started
To start the instrument, press the On/Off button located on the side of the instrument for 1 second. The
button will then illuminate in blue.

Stellina Instruction Manual v1.0 EN 2018-03 6
Note: If the button does not light up, check the power connection.
To do this, disconnect and reconnect the power cable.
 If a red light comes on for 5 seconds, try starting the instrument again.
 If nothing happens, the power supply is faulty.
Connecting to Stellina
Once switched on, Stellina creates its own Wi-Fi network.
To connect, first download the "Stellinapp" app from the App Store or Google Play.
Go to www.vaonis.com to find the list of compatible devices.
Activate your Wi-Fi connection and then connect to "MyStellina-XXXXX".
Control from the mobile app
Start the mobile app and let yourself be guided by the tutorial.
The 5 main steps are: - Initialization
- Star choice
- Object aiming and fine tuning
- Stargazing
- Image backup and sharing
Stopping Stellina
To turn off the instrument, press the On/Off button on the side of the instrument for 2 seconds. The button
will then turn red until Stellina has powered down.
VI. Care and maintenance
Stellina is an optical instrument, it is therefore fragile and requires a lot of caution when being used.
The front lens should not come in contact with fingers, fabrics, glasses cleaning cloths, liquids etc.. Only
specific optical wipes must be used, available on https://vaonis.com/telescopes/accessories
The plastic shell can be cleaned with a soft cloth and soapy water.
Do not open the device under any circumstances. Do not attempt to disassemble, modify or repair the
device, otherwise the warranty may be void and the instrument may malfunction. In case of any problems,
please contact our assistance on [phone] or by email at [e-mail].
VII. Transport and storage
Shocks and vibrations must be limited as much as possible when transporting Stellina.
Do not transport Stellina unless it's in a dedicated bag or suitcase.

Stellina Instruction Manual v1.0 EN 2018-03 7
The telescope should be stored in a clean, dry place. If moisture is present on the instrument, it is
recommended to let it dry before storing it in its box to prevent the risk of mold growth.
VIII. Technical characteristics
General
Weight 11.2kg (24.7 lbs)
Dimensions (H x W x D) 48.5 x 38.5 x 12.6cm
Operating temperature -20°C to 40°C
Power supply USB type-C / 5.1V +/- 0.1V and 2.4A minimum
Battery life Approx.10 hours of use with a 20,000mAh external battery
Image processing Integrated and adapted to target
Polar alignment Automated
Accessories included Tripod and its accessories
Control Smartphone / Tablet via mobile app
Device connection WiFi 2,4GHz
Frequency band : 2400 – 2483,5 MHz
Modulation : 802.11 b/g/n
Maximum power emitted : 6 dBm (EIRP)
Software :
brcmfmac version 7.45.41.46
Mobile application Stellinapp compatible with iOS and Android
External devices 1 USB type-C (power), 2 USB type-A for USB storage by external
accessories (not included)
Stargazing Deep sky objects (galaxies, nebulae, star clusters), the moon, the sun
(with an adapted filter), comets, asteroids
Warranty 2 years
Optics
Objective ED doublet refractor
Aperture 80mm (3.15 in)
Focal length 400mm (15.75 in)
Focal ratio F 5
Focus Integrated autofocus
Image sensor Sony CMOS 1/1.8"
Resolution 3096 x 2080 pixels (6.4 megapixels)
File formats JPEG ; FITS (16-bit raw images)
Field of view 1° x 0,7°
Magnification Equivalent to 50x and up to 100x depending on the connected
device's screen
Filters Light pollution filter
Mount
Type Alt-azimuth
Object aiming Automated with star field detection technology
Tracking Integrated automated camera guidance
Field de-rotator Built-in and controlled by the onboard computer
Dew control Integrated dew control system
IX. Warranty
Vaonis warrants that the necessary precautions have been taken in the design and manufacture of this
material.

Stellina Instruction Manual v1.0 EN 2018-03 8
Vaonis warrants that the telescope will be free from material and manufacturing defects for a period of two
years from the date of delivery of the equipment.
Vaonis will repair or replace this product or a part of it when it has been determined, following a diagnosis
with the Vaonis support service, that the product is defective due to a material or manufacturing defect.
The product will then be returned to Vaonis together with the proof of purchase according to the conditions
agreed upon with Vaonis concerning the transport and insurance costs.
The terms of this warranty are limited to the repair or replacement of the equipment.
Vaonis assumes no liability for theft or loss, damage, consequential or incidental costs resulting directly or
indirectly from the use of the equipment.
This warranty shall be null and void where the design or function of a product covered by this warranty has
been changed, or where the product has been subjected to misuse, improper handling or an unauthorized
repair.
Vaonis is not responsible for damage caused by improper use of the device.
Damage due to improper use, non-compliance with these operating instructions or interference by
unauthorized persons is not covered by the warranty.
Failure or deterioration of the product due to normal wear and tear is not covered by this warranty.
If any warranty issues arise, or if you need assistance using your telescope, contact support at
[email protected]om.
Note: This warranty is valid for European customers who have purchased this product from an authorized
Vaonis dealer in Europe. The warranty outside Europe is only valid for customers who have purchased the
product from an international distributor of Vaonis or an authorized distributor in the country in question.
Please contact them for any warranty repairs.
X. Regulatory compliance
EU declaration of conformity
Vaonis S.A.S declares that the radio equipment type Stellina is in compliance with Directive
2014/53/EU. The full text of the EU declaration of conformity is available at the following internet
address: https://vaonis.com/documents
Federal Communications Commission (FCC) Statement
Contains FCC ID : ABCB-RPI32
This device complies with FCC 47 CFR Part 15
This equipment has been tested and found to comply with the limits for a Class B radio device, pursuant to
Part 15 of the FCC Rules.
These limits are designed to provide reasonable protection against harmful interference in a residential
installation.

Stellina Instruction Manual v1.0 EN 2018-03 9
This equipment generates, uses and can radiate radio frequency energy and if not installed and used in
accordance with the instructions, may cause harmful interference to radio communications. However, there
is no guarantee that interference will not occur in a particular installation.
If this equipment does cause harmful interference to radio or television reception, which can be determined
by turning the equipment off and on, the user is encouraged to try to correct the interference by one or
more of the following measures:
 Increase the separation between the equipment and receiver.
 Connect the equipment into an outlet on a circuit different from that to which the receiver is
connected.
The equipment must be installed and used with a minimum distance of 20cm between the radiation
source and your body.
X. Disposal and recycling
This symbol affixed to the product, its packaging, its instructions or other document or accessories of the
product means that the product belongs to the family of electrical and electronic equipment. It indicates
that throughout the European Union, this product, when it is at the end of its life, should not be thrown away
with household products.
To avoid potential damage to the environment and human health from uncontrolled waste disposal, recycle
the product responsibly to promote the sustainable reuse of material resources.
The European regulations ask you to proceed with its selective collection:
- in distribution points in case of purchase of an equivalent product,
- in collection points made available to you locally (waste collection, selective collection, etc.)
In this way you are participating in the reuse and recovery of Waste Electrical and Electronic Equipment
(WEEE).