Sterling Plumbing INTRIGUE 72040106 User manual

Features
•Compression molded from Sterling’s exclusive solid
Vikrell
®
material
•Modular 3-piece design
•Lightly pebbled bottom surface for sure footing
•Tongue-and-groove ″snap together″design
•Durable high gloss finish
•10 year consumer/3 year commercial limited warranty
•Tile design
•Wall surround allows for attachment of grab bars
•40-1/4″(102.2 cm) x 40-1/4″(102.2 cm) x 80-3/8″
(204.2 cm) unit rough-in dimensions include flange
•39″(99.1 cm) x 39″(99.1 cm) x 79-1/8″(201 cm)
complete unit finished dimensions
Codes/Standards Applicable
Specified model meets or exceeds the following:
•ASTM E84
•ANSI Z124.1.2
•IAPMO/UPC
•HUD, UM Bulletin 73A
•NAHB Research Foundation, Inc.
39″(99.1 cm) NEO-ANGLE SHOWER
RECEPTOR AND WALL SURROUND
WITH BACKER BOARDS
72040106
Colors/Finishes
•0: White
•Other: Refer to Price Book for additional colors/finishes
Specified Model
Model Complete Unit Description Colors/Finishes
72040106 39″(99.1 cm) neo-angle shower receptor and wall surround with backer boards ❑0❑Other_____
Model Wall Component Description Colors/Finishes
72044106 Complete wall set with backer boards ❑0❑Other_____
72050106 39″(99.1 cm) corner complete unit ❑0❑Other_____
INTRIGUETM
SterlingPlumbing.com
Visit us online for fixture color choices, detailed product information, color photos, installation instructions, care
guides, and warranties. Sterling offers additional lines of plumbing products to complement the Sterling product
you’ve chosen. Sign up for the Sterling monthly e-newsletter which showcases our latest product innovations. You
may also call our Sterling Plumbing Answer Center from within the USA at 1-888-STERLING in addition to
consulting with your local dealer. Sterling. Strong. Professional. Design.
Page 1 of 2
1065818-4-A

Technical Information
Model Door maximum
width
Door maximum
height
72040106 15-7/8″(40.3 cm) x
27-3/8″(69.5 cm) x
15-7/8″(40.3 cm)
74″(188 cm)
Installation Notes
Install this product according to the installation guide.
Size the drain cutout to fit the drain assembly that will be
used.
End stud positioning is critical if nailing-in flanges are to be
used.
Double studding is recommended for pivot shower door
installations.
Studs should be positioned roughly as shown for roofing nail
installation.
Attach grab bars at the specified backer board locations only.
17-7/16"
(44.3 cm)
17-7/16"
(44.3 cm)
40-1/4"
(102.2 cm)
40-1/4" (102.2 cm)
14"
(35.6 cm)
14"
(35.6 cm)
12"
(30.5 cm)
12" (30.5 cm)
2" (5.1 cm) Drain Hole
8" (20.3 cm) 8" (20.3 cm)
31" (78.7 cm)
1-1/4" (3.2 cm)
27-3/8"
(69.5 cm)
39"
(99.1 cm)
4-7/8"
(12.4 cm)
40-1/4"
(102.2 cm)
80-3/8"
(204.2 cm)
Recommended Roofing
Nail Locations (4 total)
74-1/4"
(188 cm)
5-1/2" (14 cm) D.
Drain Cutout
Backer board locations
Left End Wall
22" (55.9 cm)
1" (2.5 cm)
below Grout
Line
10" (25.4 cm)
3.5" (8.9 cm)
18" (45.7 cm) 3" (7.6 cm)
from Corner
Note: Right end wall is the same as left end wall, only mirrored.
18"
(45.7 cm)
Grab Bar
24" (61 cm)
Grab Bar
Product Diagram
INTRIGUETM
INTRIGUETM 39″(99.1 cm) NEO-ANGLE SHOWER RECEPTOR AND WALL SURROUND WITH BACKER BOARDS
Page2of2
1065818-4-A