Sterling Plumbing ACCLAIM 71090116 User manual

Features
•Compression molded from Sterling’s exclusive solid
Vikrell
®
material
•Innovative design for seamless appearance
•Factory installed Vikrell
®
apron extension and plastic
undersupport for ease of installation
•Lightly pebbled bottom surface for sure footing
•Tongue-and-groove ″snap together″design
•Durable high gloss finish
•10 year consumer/3 year commercial limited
warranty, pump motor assembly has 1 year limited
warranty
•Left or right drain
•Available with or without above-the-floor drain
•Wall surround allows for attachment of grab bars
•60″(152.4 cm) x 31-1/2″(80 cm) x 75-3/4″(192.4
cm) complete unit rough-in dimensions include flange
•60″(152.4 cm) x 30″(76.2 cm) x 74-1/4″(188.6 cm)
complete unit finished dimensions
Codes/Standards Applicable
Specified model meets or exceeds the following:
•ANSI Z124.1.2
•IAPMO/UPC
•CSA B45
60″(152.4 cm) BATH/SHOWER
SYSTEM WITH BACKER BOARDS
71090116
Colors/Finishes
•0: White
•Other: Refer to Price Book for additional colors/finishes
Specified Model
Model Complete Unit Description Colors/Finishes
71090116 60″(152.4 cm) bath and wall surround with backer boards, left drain ❑0❑Other_____
71090118 60″(152.4 cm) bath and wall surround with backer boards, above-the-floor left drain ❑0❑Other_____
71090126 60″(152.4 cm) bath and wall surround with backer boards, right drain ❑0❑Other_____
71090128 60″(152.4 cm) bath and wall surround with backer boards, above-the-floor right drain ❑0❑Other_____
Model Wall Component Description Colors/Finishes
71094106 Complete wall set with backer board locations ❑0❑Other_____
ACCLAIMTM
SterlingPlumbing.com
Visit us online for fixture color choices, detailed product information, color photos, installation instructions, care
guides, and warranties. Sterling offers additional lines of plumbing products to complement the Sterling product
you’ve chosen. Sign up for the Sterling monthly e-newsletter which showcases our latest product innovations. You
may also call our Sterling Plumbing Answer Center from within the USA at 1-888-STERLING in addition to
consulting with your local dealer. Sterling. Strong. Professional. Design.
Page 1 of 2
1065806-4-A

Technical Information
Fixture:* basin area top area
Bathing
well
42″(106.7 cm) x
16-1/4″(41.3 cm)
56″(142.2 cm) x
23-3/4″(60.3 cm)
water depth capacity
To overflow 12″(33 cm) 34 gal (128.7 L)
* Approximate measurements for comparison only.
Model Door maximum
width
Door maximum
height
71090116
71090118
71090126
71090128
71090416
71090426
58-1/2″
(148.4 cm)
56-1/2″
(143.5 cm)
Installation Notes
Install this product according to the installation guide.
Size the drain cutout to fit the drain assembly that will be
used.
End stud positioning is critical if nailing-in flanges are to be
used.
Double studding is recommended for pivot shower door
installations.
Studs should be positioned roughly as shown for support clip
or roofing nail installation.
Attach grab bars at the specified backer board locations only.
Recommended Support
Clip or Roofing Nail
Location (5 Total)
Back Wall
End Wall
15" (38.1 cm)
3" (7.6 cm)
1-1/2"
(3.8 cm)
73-1/2"
(186.7 cm)
54"
(137.2 cm)
19"
(48.3 cm)
18"
(45.7 cm)
60" (152.4 cm)
4" (10.2 cm)
60" (152.4 cm) Min
60-1/8" (152.7 cm) Max
3-1/2"
(8.9 cm)
2" (5.1 cm)
D. Drain
8-3/4"
(22.2 cm)
22-1/4"
(56.5 cm)
14-1/4"
(36.2 cm) 8"
(20.3 cm)
31-1/2"
(80 cm)
6" (15.2 cm)
(Typical)
14"
(35.6 cm) 16" (40.6 cm)
30" (76.2 cm)
31-1/2" (80 cm)
Drain Cutout
30"
(76.2 cm)
4-3/4"
(12.1 cm)
3-1/2" (8.9 cm)
3-1/4"
(8.3 cm)
8" (20.3 cm)
1" (2.5 cm)
22"
(55.9 cm)
18" (45.7 cm)
Grab Bar
3-1/2"
(55.9 cm)
22"
(55.9 cm)
2" (5.1 cm)
11"
(27.9 cm)
21" (53.3 cm)
2"
(5.1 cm)
Backer board locations
Note: Right and left end walls
are the same, only mirrored.
10" (25.4 cm)
Grab Bar
24" (61 cm)
Grab Bar
2-3/4" (7 cm)
Overflow Detail
1-1/2"
(3.8 cm)
Product Diagram
ACCLAIMTM
ACCLAIMTM 60″(152.4 cm) BATH/SHOWER SYSTEM WITH BACKER BOARDS
Page2of2
1065806-4-A