stilum multiplay ascendo 1B Robinia User manual

State: 04.12.2020 p. 1
Mounting instructions for multiplay „ascendo 1B“ Robinia
Item-No. 51 7502 601
© stilum GmbH, Gewerbegebiet Larsheck, D-56271 Kleinmaischeid • Tel. [phone] • All rights and product modications reserved.
reman´s pole
tower
climbing slant
slide
swing
rail
Diagram 1: Overall view of the play equipment
post
post shoe

State: 04.12.2020 p. 2
Mounting instructions for multiplay „ascendo 1B“ Robinia
Item-No. 51 7502 601
© stilum GmbH, Gewerbegebiet Larsheck, D-56271 Kleinmaischeid • Tel. [phone] • All rights and product modications reserved.
1. Select the location of the play equipment taking into account the required
minimum space (see diagram 2).
Note: Due to possible overheating, do not place the slide surface southernly.
2. The impact area of a playground equipment with an enforced movement is
not allowed to overlap the impact area of other equipment.
According to DIN EN 1176-1, 4.2.8.5.2 shock-absorbing oors must be made
on the entire impact area of every equipment that cause forced movement.
3. Carry out excavation work for the foundations as shown in diagram 3. After
excavation compress the foundation oor.
Note:The combination equipment is installed at play level. Pay attention to
items marked „play level” at play equipment!
4. Set up the concrete foundations according to diagram 3 with central, horizon-
tal reinforcement.
5. After a setting period of 10 – 14 days, depending on weather conditions and
foundation size, ll up and compress the holes between the foundation and
the foundation hole with excavation.
6. Clean the surface of the foundations and start with the installation of the play
equipment.
Reinforcement plan. Concrete foundation with reinforcement
Foundation: BSt 500S
Stirrups Ø 8 mm lengthwise and cross
Concrete cover h´= 3 cm
Concrete quality class C 20/25-C25/30
7600
2000
9100
R1000
R1500
R1500
R1500
6100
1850
1504
R1000
500
9500
6500
3800
500
2630
Fallschutzplatten
required safety slabs
mind. Fallschutzplatten
min. required safety slabs Aufprallfläche
Impact area
OHNE SCHRIFTLICHE ZUSTIMMUNG DER CONRADI+KAISER GMBH DARF DIESE
TECHNISCHE UNTERLAGE WEDER VERVIELFÄLTIGT, NOCH DRITTEN MITGETEILT ODER
ZUGÄNGLICH GEMACHT WERDEN, NOCH IN SONSTIGER WEISE MISSBRÄEUCHLICH VER-
WENDET WERDEN. ZUWIDERHANDLUNGEN WERDEN URHEBERRECHTLICH VERFOLGT.
1
ascendo 1B
Benennung
Gepr.
Blatt
Datum
Projekt
Gez.
Zeichnungsnummer
Rev Änderung Datum
1:50
A3
Name
Name
Draufsicht
1026-00-00
Maßstab
Mattheis
02.05.17
A Aufprallfläche angepasst 30.11.20 SI
Gewerbegebiet Larsheck
56271 Kleinmaischeid
Deutschland
Diagram 2: Top view

State: 04.12.2020 p. 3
Mounting instructions for multiplay „ascendo 1B“ Robinia
Item-No. 51 7502 601
© stilum GmbH, Gewerbegebiet Larsheck, D-56271 Kleinmaischeid • Tel. [phone] • All rights and product modications reserved.
7190
400
1717
2663 1992
450
2921
3371
A A
424
2070
2557
600
400
500
1000
910
1750
1690
3439
1992
550
3538
600
7505
875
600
A-A
3180
400 450
OHNE SCHRIFTLICHE ZUSTIMMUNG DER CONRADI+KAISER GMBH DARF DIESE
TECHNISCHE UNTERLAGE WEDER VERVIELFÄLTIGT, NOCH DRITTEN MITGETEILT ODER
ZUGÄNGLICH GEMACHT WERDEN, NOCH IN SONSTIGER WEISE MISSBRÄEUCHLICH VER-
WENDET WERDEN. ZUWIDERHANDLUNGEN WERDEN URHEBERRECHTLICH VERFOLGT.
1
ascendo 1B
Benennung
Gepr.
Blatt
Datum
Projekt
Gez.
Zeichnungsnummer
1:50
A3
Name
Name
Fundament
1026-00-00
Maßstab
Mattheis
03.05.17
Gewerbegebiet Larsheck
56271 Kleinmaischeid
Deutschland
Beton
concrete
gewachsenes Erdreich
natural ground
Legende
stoßdämpfender Boden
shock-absorbing floor
ES 09.09.20 stoßdämpfender Boden A
DatumÄnderungRev
7190
400
1717
2663 1992
450
2921
3371
A A
424
2070
2557
600 400
500
1000
910
1750
1690
3439
1992
550
3538
600
7505
875
600
A-A
3180
400 450
OHNE SCHRIFTLICHE ZUSTIMMUNG DER CONRADI+KAISER GMBH DARF DIESE
TECHNISCHE UNTERLAGE WEDER VERVIELFÄLTIGT, NOCH DRITTEN MITGETEILT ODER
ZUGÄNGLICH GEMACHT WERDEN, NOCH IN SONSTIGER WEISE MISSBRÄEUCHLICH VER-
WENDET WERDEN. ZUWIDERHANDLUNGEN WERDEN URHEBERRECHTLICH VERFOLGT.
1
ascendo 1B
Benennung
Gepr.
Blatt
Datum
Projekt
Gez.
Zeichnungsnummer
1:50
A3
Name
Name
Fundament
1026-00-00
Maßstab
Mattheis
03.05.17
Gewerbegebiet Larsheck
56271 Kleinmaischeid
Deutschland
Beton
concrete
gewachsenes Erdreich
natural ground
Legende
stoßdämpfender Boden
shock-absorbing floor
ES 09.09.20 stoßdämpfender Boden A
DatumÄnderungRev
Diagram 3: Foundation plan

State: 04.12.2020 p. 4
Mounting instructions for multiplay „ascendo 1B“ Robinia
Item-No. 51 7502 601
© stilum GmbH, Gewerbegebiet Larsheck, D-56271 Kleinmaischeid • Tel. [phone] • All rights and product modications reserved.
7. Align the tower as shown in diagram 1 and 2 on the foundations. Rotate the
posts so, that there is a distance of < 89 mm between the vertical stainless
steel tube of the rail and the posts, to avoid traps.
The distance between the posts and the bow of the slide should be
> 230 mm. This can also also be achieved by rotating.
Note: Do not screw the base plates onto the foundations yet!
8. Place the climbing slant (diagram 4a) on the adpaters acc. to diagram 5c
and x it with the screws and the pipe connectors which are included in the
delivery.
9. Connect the reman‘s pole (diagram 4b) acc. to diagram 5a on the adapters
and x it with the screws included in the delivery.
10. Connect the slide (diagram 4c) with the tower at the intended locatios acc. to
diagram 5b and fasten it with the screws and washers included in the delive-
ry.
11. Set up the swing (diagram 4d) and connect it with the tower at the intended
location acc. to diagram 5d. Please fasten the parts using the screws inclu-
ded in the delivery. Attach chains with swing seat to the swing suspension.
12. Align the play equipment once more on the foundation .
13. Drill holes into all foundations and screw the play equipment to the founda-
tions with the included heavy-duty dowels.
OHNE SCHRIFTLICHE ZUSTIMMUNG DER CONRADI+KAISER GMBH DARF DIESE
TECHNISCHE UNTERLAGE WEDER VERVIELFÄLTIGT, NOCH DRITTEN MITGETEILT ODER
ZUGÄNGLICH GEMACHT WERDEN, NOCH IN SONSTIGER WEISE MISSBRÄEUCHLICH VER-
WENDET WERDEN. ZUWIDERHANDLUNGEN WERDEN URHEBERRECHTLICH VERFOLGT.
1
ascendo robinie
Benennung
Gepr.
Blatt
Datum
Projekt
Gez.
Zeichnungsnummer
1:20
A3
Name
Feuerwehrstange mit Bogen
1025-11-00
Maßstab
Simonis xx.xx.xx
Gewerbegebiet Larsheck
56271 Kleinmaischeid
Deutschland
OHNE SCHRIFTLICHE ZUSTIMMUNG DER CONRADI+KAISER GMBH DARF DIESE
TECHNISCHE UNTERLAGE WEDER VERVIELFÄLTIGT, NOCH DRITTEN MITGETEILT ODER
ZUGÄNGLICH GEMACHT WERDEN, NOCH IN SONSTIGER WEISE MISSBRÄEUCHLICH VER-
WENDET WERDEN. ZUWIDERHANDLUNGEN WERDEN URHEBERRECHTLICH VERFOLGT.
1
ascendo robinie
Benennung
Gepr.
Blatt
Datum
Projekt
Gez.
Zeichnungsnummer
1:20
A3
Name
Feuerwehrstange mit Bogen
1025-11-00
Maßstab
Simonis xx.xx.xx
Gewerbegebiet Larsheck
56271 Kleinmaischeid
Deutschland
OHNE SCHRIFTLICHE ZUSTIMMUNG DER CONRADI+KAISER GMBH DARF DIESE
TECHNISCHE UNTERLAGE WEDER VERVIELFÄLTIGT, NOCH DRITTEN MITGETEILT ODER
ZUGÄNGLICH GEMACHT WERDEN, NOCH IN SONSTIGER WEISE MISSBRÄEUCHLICH VER-
WENDET WERDEN. ZUWIDERHANDLUNGEN WERDEN URHEBERRECHTLICH VERFOLGT.
1
ascendo robinie
Benennung
Gepr.
Blatt
Datum
Projekt
Gez.
Zeichnungsnummer
1:20
A3
Name
Feuerwehrstange mit Bogen
1025-11-00
Maßstab
Simonis xx.xx.xx
Gewerbegebiet Larsheck
56271 Kleinmaischeid
Deutschland
OHNE SCHRIFTLICHE ZUSTIMMUNG DER CONRADI+KAISER GMBH DARF DIESE
TECHNISCHE UNTERLAGE WEDER VERVIELFÄLTIGT, NOCH DRITTEN MITGETEILT ODER
ZUGÄNGLICH GEMACHT WERDEN, NOCH IN SONSTIGER WEISE MISSBRÄEUCHLICH VER-
WENDET WERDEN. ZUWIDERHANDLUNGEN WERDEN URHEBERRECHTLICH VERFOLGT.
1
ascendo robinie
Benennung
Gepr.
Blatt
Datum
Projekt
Gez.
Zeichnungsnummer
1:20
A3
Name
Feuerwehrstange mit Bogen
1025-11-00
Maßstab
Simonis xx.xx.xx
Gewerbegebiet Larsheck
56271 Kleinmaischeid
Deutschland
Diagram 4a: attachment
part „climbing slant“
Diagram 4c: attachment
part „slide“
Diagram 4b: attachment
part „remans pole“
Diagram 4d: attachment part
„swing“

State: 04.12.2020 p. 5
Mounting instructions for multiplay „ascendo 1B“ Robinia
Item-No. 51 7502 601
© stilum GmbH, Gewerbegebiet Larsheck, D-56271 Kleinmaischeid • Tel. [phone] • All rights and product modications reserved.
Diagram 5a: connection remans pole
Diagram 5c: connection climbing slant
Diagram 5d: connection swing
B
C
D
E
OHNE SCHRIFTLICHE ZUSTIMMUNG DER CONRADI+KAISER GMBH DARF DIESE
TECHNISCHE UNTERLAGE WEDER VERVIELFÄLTIGT, NOCH DRITTEN MITGETEILT ODER
ZUGÄNGLICH GEMACHT WERDEN, NOCH IN SONSTIGER WEISE MISSBRÄEUCHLICH VER-
WENDET WERDEN. ZUWIDERHANDLUNGEN WERDEN URHEBERRECHTLICH VERFOLGT.
2
ascendo 1A
Benennung
Gepr.
Blatt
Datum
Projekt
Gez.
Zeichnungsnummer
1:100
A3
Name
Übersicht
1026-00-00
Maßstab
Simonis xx.xx.xx
Gewerbegebiet Larsheck
56271 Kleinmaischeid
Deutschland
B
C
D
E
OHNE SCHRIFTLICHE ZUSTIMMUNG DER CONRADI+KAISER GMBH DARF DIESE
TECHNISCHE UNTERLAGE WEDER VERVIELFÄLTIGT, NOCH DRITTEN MITGETEILT ODER
ZUGÄNGLICH GEMACHT WERDEN, NOCH IN SONSTIGER WEISE MISSBRÄEUCHLICH VER-
WENDET WERDEN. ZUWIDERHANDLUNGEN WERDEN URHEBERRECHTLICH VERFOLGT.
2
ascendo 1A
Benennung
Gepr.
Blatt
Datum
Projekt
Gez.
Zeichnungsnummer
1:100
A3
Name
Übersicht
1026-00-00
Maßstab
Simonis xx.xx.xx
Gewerbegebiet Larsheck
56271 Kleinmaischeid
Deutschland
F
H
F (1 : 10)
H (1 : 10)
I
I (1 : 10)
J
J (1 : 20)
OHNE SCHRIFTLICHE ZUSTIMMUNG DER CONRADI+KAISER GMBH DARF DIESE
TECHNISCHE UNTERLAGE WEDER VERVIELFÄLTIGT, NOCH DRITTEN MITGETEILT ODER
ZUGÄNGLICH GEMACHT WERDEN, NOCH IN SONSTIGER WEISE MISSBRÄEUCHLICH VER-
WENDET WERDEN. ZUWIDERHANDLUNGEN WERDEN URHEBERRECHTLICH VERFOLGT.
3
ascendo 1B
Benennung
Gepr.
Blatt
Datum
Projekt
Gez.
Zeichnungsnummer
1:100
A3
Name
Explosion
1026-00-00
Maßstab
Simonis xx.xx.xx
Gewerbegebiet Larsheck
56271 Kleinmaischeid
Deutschland
F
H
F (1 : 10)
H (1 : 10)
I
I (1 : 10)
J
J (1 : 20)
OHNE SCHRIFTLICHE ZUSTIMMUNG DER CONRADI+KAISER GMBH DARF DIESE
TECHNISCHE UNTERLAGE WEDER VERVIELFÄLTIGT, NOCH DRITTEN MITGETEILT ODER
ZUGÄNGLICH GEMACHT WERDEN, NOCH IN SONSTIGER WEISE MISSBRÄEUCHLICH VER-
WENDET WERDEN. ZUWIDERHANDLUNGEN WERDEN URHEBERRECHTLICH VERFOLGT.
3
ascendo 1B
Benennung
Gepr.
Blatt
Datum
Projekt
Gez.
Zeichnungsnummer
1:100
A3
Name
Explosion
1026-00-00
Maßstab
Simonis xx.xx.xx
Gewerbegebiet Larsheck
56271 Kleinmaischeid
Deutschland
Diagram 5b: connection slide

State: 04.12.2020 p. 6
Mounting instructions for multiplay „ascendo 1B“ Robinia
Item-No. 51 7502 601
© stilum GmbH, Gewerbegebiet Larsheck, D-56271 Kleinmaischeid • Tel. [phone] • All rights and product modications reserved.
14. Cover the entire impact area with fall protection according to the required
drop height in accordance with EN 1176-1.
Critical drop height: 1700 mm.
Recommended surface material: sand, wood chip, gravel, synth. impact
protection.
With a smaller installation depth (special edition) we recommend synthetic
impact protection. In this case, make sure that protruding parts (e.g. screws,
gusset plates) are covered with appropriate fall protection.
15. Do not allow children to use the equipment before the installation has been
nished.
Attention: If the play equipment has been incompletely installed or partly
dismantled when carrying out maintenance and repair work, this may lead to
particular risks of injury for the user. For this reason, make clearly visible that the
equipment shall not be used in such cases.
STAINLESS STEEL
NOTE: Play equipment, which contain components made of stainless steel
should not come with „normal“ steel parts in contact. Those steel parts may rub
o󰀨 and leave small steel particles in combination with moisture brown rust stains.
MAINTENANCE: If such corrosion occur on stainless steel parts, they are ne to
remove with an abrasive (240 grit).
Please take care when transporting and setting up the fact that the components
are made of stainless steel with no „normal“ steel parts in contact.
In order to preserve a good visual appearance of your stilum playground equip-
ment over a long period one should take care of maintenance of the stainless
surface even despite of their corrosion resistance.
Especially areas, which can not be reached by rainfall should be frequently clea-
ned from dirt and deposits due to air pollution and dirt caused by the atmosphere.
Light soiling can easily be romoved by using a high pressure cleaner.
For persistent deposits use a clean cloth moistened with a special liquid cleaner
(e.g. on phosphoric acid) and rinse o󰀨 with clear water after a short application
time. During cleaning with mild abrasive components, only wipe over stainless
steel surface in polishing direction.

State: 04.12.2020 p. 7
Mounting instructions for multiplay „ascendo 1B“ Robinia
Item-No. 51 7502 601
© stilum GmbH, Gewerbegebiet Larsheck, D-56271 Kleinmaischeid • Tel. [phone] • All rights and product modications reserved.
For heavily soiled surfaces, polishes can be used (e.g. for cleaning chrome on
cars) or for greasy and oily dirt alcoholic cleaning agents and solvents (e.g. ethyl
alcohol, isopropyl alcohol or acetone).
However, it should be noted that the dissolved soiling is not spread over the
surface again.
Do not use any chlorid or hydrochloric containing cleaning products nor scouring
powder, bleaching - or silver polish cleaner. Cleaning intervals depend on type
and degree of soiling as well as on demands made on optical characteristics.
Therefore cleaning is advisable at intervals of six to twelve months – whereby in
the case of strong soiling it is appropriate to clean the playground equipment at
intervals of three to six months.
WOOD
NOTE: For all play equipment with wooden elements, it cannot be ruled out that
dry cracks may develop. These natural changes of wood are dependent on cli-
mate conditions as well as on the age and usage of the play equipment.
Longer dry periods may lead to more dry cracks.
This development, however, does not represent a quality defect. Static properties
of the equipment are not impaired.
See EN 1176 Bbl 1:2019-01 4.2.7.6: Dry cracks in wood elements as a conse-
quence of weather conditions are not to be considered as dangerous openings
in terms of the standard due to the fact that the shape of the cracks (tapering
towards the inside) makes it almost impossible for ngers to get trapped in them.
MAINTENANCE: To ensure a long life of stilum playground equipment, wooden
surfaces should be regularly re-glazed. This provides the wooden surfaces with
the necessary protection and preserves the look. Areas which are not exposed to
rain should be regularly freed from deposits.
The cleaning intervals depend on the degree and type of soiling as well as on the
exigencies on cleanliness. It is recommended to clean and / or glaze at every 6
to 12 months, or to shorten the cleaning interval to 3 to 6 months if the wheather
conditions are bad.
LASUR: Use a soft and at brush or / and a glaze application roll to paint.
The wood should be cleaned a few hours before glazing. That can be done with
mild javel water, which should in any case be rubbed o󰀨 afterwards. For resistant
dirt use a wood cleaner. Eventually a light abrasion is necessary. If water-based
detergents are used for cleaning, please ensure that the wood elements are tho-
roughly dried before the glazing is done.
Always brush in one direction, so that the glaze can spread evenly. Apply very
thinly!
Remove glaze with a soft cotton cloth.
Then let the freshly glazed wood dry for at least one day and prohibit the use of
the equipment for this duration.