stilum vola2 User manual

© stilum GmbH, Gewerbegebiet Larsheck, 56271 Kleinmaischeid • Tel. [phone] • All rights and product modications reserved. State: 10/04/2015 · S. 1 · MS/TSA
Mounting instructions for swing „vola2“
Item No. 512023402
Diagram 1: Overall view of the play equipment

© stilum GmbH, Gewerbegebiet Larsheck, 56271 Kleinmaischeid • Tel. [phone] • All rights and product modications reserved. State: 10/04/2015 · S. 2 · MS/TSA
Mounting instructions for swing „vola2“
Item No. 512023402
















 

 




 













1:30






 


Diagram 2: Side view with dimension details „vola2“
Play level
Concrete foundations
1. Select the play equipment location in consideration of the required safety
area (see Diagram 4: 3000 x 7100mm).
2. The impact area of a playground equipment with an enforced movement is
not allowed to overlap the impact area of other equipment.
Regarding to DIN 1176 - 4.2.8.2.5, impact absorbing surfaces have to be put
under the whole impact area of every equipment with an enforced movement.
3. Carry out excavation work for 4 foundations as shown in Diagram 2 and 3.
After excavation, compress the foundation oor.
Note: The swing is built in on the play level. Pay attention to items marked
„game level“ of play equipment!
4. Set up the concrete foundations acc. to the dimensions indicated (LxWxH
800 x 600 x 500 mm) with central, horizontal reinforcement (BST 500 S) in
the quality class C 20/25. Place the mounted swing into the foundations acc.
to the dimensions indicated in Diagram 2 and 3.Compress concrete!
5. Align swing in vertical and horizontal direction and keep it supported until the
foundations have bound off. Note: Make sure that the supported swing is not
used for playing.
6. After a setting period of 10-14 days, depending on weather conditions and
Reinforcement plan: Concrete foundation with rein-
forcement
Main foundation: BSt 500S
Ever 4 stirrups Ø 8 mm lengthwise and cross
Concrete cover h´= 3 cm
Concrete quality class C 20/25
800
450
1367
500
402
94
1367
600
94
800
600
2467
150
2314
2126
Freie Fallhöhe ≤ 1200mm
D
E
F
C
1 2 3 4
B
A
3 2 1 5
C
D
4 6 7 8
A
B
Zust.
Änderung
Datum
Datum
Name
Name
Bearb.
Gepr.
Norm
A3
Bl.
Allgemein-
toleranzen
DIN 7168-m
Maßstab 1:25
29.01.2015
Kistinger
vola2
Fundamentzeichnung
0120-50-00
Fertigung
E
800
450
1367
500
402
94
1367
600
94
800
600
2467
150
2314
2126
Freie Fallhöhe ≤ 1200mm
D
E
F
C
1 2 3 4
B
A
3 2 1 5
C
D
4 6 7 8
A
B
Zust.
Änderung
Datum
Datum
Name
Name
Bearb.
Gepr.
Norm
A3
Bl.
Allgemein-
toleranzen
DIN 7168-m
Maßstab 1:25
29.01.2015
Kistinger
vola2
Fundamentzeichnung
0120-50-00
Fertigung
E
Diagram 3: Top view with dimension details „vola2“

© stilum GmbH, Gewerbegebiet Larsheck, 56271 Kleinmaischeid • Tel. [phone] • All rights and product modications reserved. State: 10/04/2015 · S. 3 · MS/TSA
Mounting instructions for swing „vola2“
Item No. 512023402
Diagram 4: Top view „vola2“
Concrete foundations
Size of the minimum space = safety area
The dimensions of the sketches relating to the use of natural
surfaces with impact-absorbing effect.
When using synthetic safety tiles
will reduce the impact surface in the direction of swing
by 500 mm. The minimum space remains
preserved in its entirety.
foundation size, seal the foundation with the safety cover required for the
height of fall indicated. Set up impact-absorbing playground surfacing accor-
ding to EN 1177 HIC 1000.
Recommended surface material: sand, bark mulch, gravel, synth. fall protec-
tion. (Critical drop height ≤ 1200 mm)
7. Screw the chains with the swing seats onto the swing suspension. Readjust
the screws on the swing bars.
8. Do not allow children to use the equipment before the installation has been
nished.
Attention: If the play equipment has been incompletely installed or partly dis-
mantled when carrying out maintenance and repair work, this may lead to par-
ticular risks of injury for the user. For this reason, make clearly visible that the
equipment shall not be used in such cases.
NOTE: Play equipment, which contain components made of stainless steel
should not come with „normal“ steel parts in contact. Those steel parts may rub
off and leave small steel particles in combination with moisture brown rust stains.
If such corrosion occur on stainless steel parts, they are ne with an abrasive
(240 grit) to remove.
Please take care when transporting and setting up the fact that the components
are made of stainless steel with no „normal“ steel parts in contact.
2126
2314
600
800
7100
3000
3550
D
E
F
C
1 2 3 4
B
A
3 2 1 5
C
D
4 6 7 8
A
B
Zust.
Änderung
Datum
Datum
Name
Name
Bearb.
Gepr.
Norm
A3
Bl.
Allgemein-
toleranzen
DIN 7168-m
Maßstab 1:50
29.01.2015
Kistinger
vola2
Mindestraum
0120-50-00
Fertigung
E

© stilum GmbH, Gewerbegebiet Larsheck, 56271 Kleinmaischeid • Tel. [phone] • All rights and product modications reserved. State: 10/04/2015 · S. 4 · MS/TSA
Mounting instructions for swing „vola2“
Item No. 512023402
In order to preserve a good visual appearance of your stilum playground equip-
ment over a long period one should take care of maintenance of the stainless
surface even despite of their corrosion resistance.
Especially areas, which can not be reached by rainfall should be frequently clea-
ned from dirt and deposits due to air pollution and dirt caused by the atmosphere.
Light soiling can easily be romoved by using a high pressure cleaner.
For persistent deposits use a clean cloth moistened with a special liquid cleaner
(e.g. on phosphoric acid) and rinse off with clear water after a short application
time. During cleaning with mild abrasive components, only wipe over stainless
steel surface in polishing direction.
For heavily soiled surfaces, polishes can be used (e.g. for cleaning chrome on
cars) or for greasy and oily dirt alcoholic cleaning agents and solvents (e.g. ethyl
alcohol, isopropyl alcohol or acetone).
However, it should be noted that the dissolved soiling is not spread over the sur-
face again.
Do not use any chlorid or hydrochloric containing cleaning products nor scouring
powder, bleaching - or silver polish cleaner. Cleaning intervals depend on type
and degree of soiling as well as on demands made on optical characteristics.
Therefore cleaning is advisable at intervals of six to twelve months – whereby in
the case of strong soiling it is appropriate to clean the playground equipment at
intervals of 3 to six months.