
Have you got everything?
Let’s get your new bladeless fan with
purifier & Wi-Fi control ready to use, fast!
Quick Start Guide
Model: BF21APF
WCIMQSG
8
7
6
Installing the filter
9
10
B
Take the filter out of the plastic bag.
Push the wind outlet gently to the back
(max. 15 degrees). Place your hand flat on
the top cover, push down firmly and turn it
slightly anticlockwise until it snaps open.
Place the top cover upside down on
a sturdy surface. Place the filter in the
grooves and push it down firmly with both
hands until you hear it click into place.
Place the filter with the top cover into the
housing. Turn it loosely until the curved
edges almost line up, then press down
firmly and turn clockwise until it locks
securely into place.
A
Nearly done! For operation
instructions, turn over the page ...
1
2
4
5
3
6
7
8
Your new bladeless fan with purifier comes
ready assembled, except for the HEPA filter.
The air-purifying HEPA filter is supplied
separately. Before using the fan, you must
install the filter into the appliance housing
– see the instructions below.
Use the supplied AC adaptor to supply power
to the fan.
For easy operation of the fan from your home,
use the supplied remote control. It contains
a coin battery inside, so always keep it out of
reach of children.
Basic functions can also be set with the touch
screen button on the fan body.
Keep in mind that this quick start guide only
contains basic instructions to get you started.
For the full picture, please refer to the
supplied instruction manual, which has
comprehensive installation and usage
instructions and important safety advice.
Keep the warranty certificate in a safe place
for future reference.
11
1
2
3
5
Do not use the fan until the filter is fitted
securely into the housing.
910
11
4