Stirling STR-H221W1 User manual

Model Number STR-H221W1
Top Mount Refrigerator
INSTRUCTION MANUAL
po.org
MODEL: STR-H221W1 PRODUCT CODE: 706509 10/2021
AFTER SALES SUPPORT info@tem
AUS 1300 112 534

2po.org
MODEL: STR-H221W1 PRODUCT CODE: 706509 10/2021
AFTER SALES SUPPORT info@tem
AUS 1300 112 534
Welcome
Congratulations on choosing to buy a STIRLING®product.
All products brought to you by STIRLING®are manufactured to the highest standards
of performance and safety and, as part of our philosophy of customer service and
satisfaction, are backed by our comprehensive 3 Year In Home Warranty. We hope you
will enjoy using your purchase for many years to come.

3
po.org
MODEL: STR-H221W1 PRODUCT CODE: 706509 10/2021
AFTER SALES SUPPORT info@tem
AUS 1300 112 534
Contents
02 Welcome
04 Warranty Details
05 General Safety Instructions
08 Product Overview
09 Getting Started
11 Instructions
16 FAQs and Troubleshooting Guide
18 Other Useful Information
23 Repair and Refurbished Goods or Parts Notice

4po.org
MODEL: STR-H221W1 PRODUCT CODE: 706509 10/2021
AFTER SALES SUPPORT info@tem
AUS 1300 112 534
Top Mount Refrigerator
Warranty Details
The product is guaranteed to be free from defects in workmanship and parts for
a period of 36 months from the date of purchase. Defects that occur within this
warranty period, under normal use and care, will be repaired, replaced or refunded
at our discretion. The benefits conferred by this warranty are in addition to all
rights and remedies in respect of the product that the consumer has under the
Competition and Consumer Act 2010 and similar state and territory laws.
Our goods come with guarantees that cannot be excluded under the Australian
Consumer Law. You are entitled to a replacement or refund for a major failure
and to compensation for any other reasonably foreseeable loss or damage. You
are also entitled to have the goods repaired or replaced if the goods fail to be of
acceptable quality and the failure does not amount to a major failure.
REGISTER YOUR PURCHASE AT www.aldi.com.au/en/about-aldi/product-registration/ TO KEEP UP-TO-DATE WITH IMPORTANT PRODUCT INFORMATION

5
po.org
MODEL: STR-H221W1 PRODUCT CODE: 706509 10/2021
AFTER SALES SUPPORT info@tem
AUS 1300 112 534
General Safety Instructions
Pay particular attention to messages that follow this safety alert symbol
or the words DANGER, WARNING or CAUTION. These words are used
to alert you to a potential hazard that can seriously injure you and others.
The instructions will tell you how to reduce the chance of injury and let
you know what can happen if the instructions are not followed.
Refrigerant matters
WARNING: Do not damage the refrigerant circuit! Never use an appliance with a
damaged refrigerant circuit! If the refrigerant circuit becomes damaged during transport
or installation, avoid proximity to open fires and all types of heat and ignition sources.
Thoroughly ventilate the room in which the appliance is located.
The room for installing the appliance must be at least 1 m³ per 8 g of refrigerant.
The amount and type of refrigerant in the appliance can be found in the technical
specifications on page 22 and on the appliance rating plate. It is hazardous for anyone
other than an authorised service person to service this appliance. In Queensland,
the authorised service person MUST hold a Gas Work Authorisation for hydrocarbon
refrigerants to carry out servicing or repairs which involve the removal of covers.
READ CAREFULLY AND KEEP FOR FUTURE REFERENCE
Read this manual thoroughly before first use, even if you are familiar with this type of
product. The safety precautions enclosed herein reduce the risk of fire, electric shock and
injury when correctly adhered to. Keep the manual in a safe place for future reference,
along with the completed warranty card, purchase receipt and carton. If applicable, pass
these instructions on to the next owner of the appliance.
This symbol alerts you to take care as the appliance contains flammable
materials: isobutane as refrigerant and cyclopentane as insulation
blowing gas. While isobutane (R600a) is a gas with a high level of
environmental compatibility, it is nevertheless flammable. Do not expose
the appliance to high heat, sparks and open flames.
Responsible disposal
At the end of its working life, do not throw this appliance out with your household waste.
Electrical and electronic products contain substances that can have a detrimental
effect on the environment and human health if disposed of inappropriately. Observe any
local regulations regarding the disposal of electrical consumer goods and dispose of it
appropriately for recycling and recovery of the refrigerant and blowing agent.
WARNING! This refrigeration appliance contains flammable refrigerants and insulation
blowing gases, which must be removed before disposal. Contact your municipal
authorities for any codes or regulations concerning the disposal of such materials.
DANGER! Risk of child entrapment: When discarding this or another refrigerator, pull
the plug out of the socket, cut the connection cable (as close to the appliance as you can)
and remove the doors to prevent playing children to suffer electric shock or to get trapped
inside the appliance. If the discarded appliance has a spring lock (latch) on the door or lid,
make the spring lock unusable to prevent it from becoming a death trap for children.

6po.org
MODEL: STR-H221W1 PRODUCT CODE: 706509 10/2021
AFTER SALES SUPPORT info@tem
AUS 1300 112 534
To reduce the risk of fire, electric shock or injury, always follow basic safety precautions
and accident prevention measures when using this appliance, including the following:
Electrical safety
• Voltage: Plug the appliance in a 220–240 V, 50 Hz, properly earthed power outlet, which
must be in good working order. Make sure your outlet voltage and circuit frequency
correspond to the voltage stated on the appliance rating label.
• Power connection: Do not use an adaptor; do not use an extension cord. Plug
the power plug directly into a separate power point that cannot easily be turned off
accidentally, and that is easily accessible so you can switch it off when required.
• Power cord: Do not kink or damage the power supply cord. Do not attempt to lengthen
it. Do not leave the cord exposed or dangling. Secure it behind the appliance so no one
steps on or places anything on the cord or against it. A squashed or damaged power
plug may overheat and cause a fire.
WARNING: When positioning the appliance, ensure the power supply cord is not
trapped or damaged. Do not locate multiple portable socket outlets or portable power
supplies at the rear of the appliance.
• Damaged cord: Do not use a cord that shows cracks or abrasion damage along its
length or at either end. Any damage to the cord may cause a short circuit, fire and/or
electric shock. If the power cord is damaged, it must be replaced by the manufacturer or
its service agent. Contact the after sales support line for advice.
• WARNING! The light bulb supplied with this appliance is a special use bulb, which is
only suitable for use with this appliance, it is not usable for domestic lighting. Do not use
the appliance without the lamp properly installed. Do not touch the light bulb if it has
been on for a long period of time, as it could be very hot. The interior lamp can only be
replaced by authorised service personnel. Please contact our after sales support centre
for a service if the lamp needs replacing.
• Disconnection: Never unplug the unit by pulling the cord. Always grip the plug firmly
and pull straight out from the power point.
• Electrical work: All electrical work associated with the installation must be carried out
by a licensed electrician.
Usage conditions and restrictions
• Indoor domestic use only: This appliance is intended for indoor household use only.
It is not suitable for industrial or commercial use. Do not use this appliance for anything
other than its intended purpose, and only use it as described in this manual. Do not
attempt to alter or modify this appliance in any way.
• Usage restrictions: This appliance is not intended for use by persons (including
children) with reduced physical, sensory or mental capabilities, or lack of experience
and knowledge, unless they have been given supervision or instruction concerning the
use of the appliance by a person responsible for their safety.
• Children: Supervise children to ensure they do not play with the appliance. Close
supervision is necessary when any appliance is used by or near children. Never allow
children to operate, play with or crawl inside the appliance.
• WARNING! Do not use any electrical appliances (such as ice cream makers) inside
refrigeration appliances, unless they are approved for this purpose by the manufacturer.
General Safety Instructions (Cont.)

7
po.org
MODEL: STR-H221W1 PRODUCT CODE: 706509 10/2021
AFTER SALES SUPPORT info@tem
AUS 1300 112 534
General Safety Instructions (Cont.)
Cleaning and maintenance
• Disconnect: Switch off and unplug the appliance from the mains socket before
cleaning, maintenance or servicing. Failure to do so can result in electric shock, injury
or death. Do not connect or disconnect the plug when your hands are wet.
• Flames: Do not let open flames or ignition sources enter the appliance.
• Flammable/explosive substances: Never clean this appliance with flammable fluids.
Do not store or use volatile, flammable or explosive substances such as aerosol cans
with a flammable propellants in or close to this or any other appliance. The fumes can
create a fire hazard or explosion.
• Solvents: Do not use solvent based cleaning agents or abrasives on the interior as
these may damage or discolour the surfaces of the appliances.
• WARNING! Do not use mechanical devices or other means to accelerate the defrost-
ing process, other than those recommended by the manufacturer. Never use a sharp or
metal instrument to remove frost or clean the fridge. Use a plastic scraper, if necessary.
• Service: Do not attempt to repair, modify or replace any part of the appliance unless
specifically recommended in this manual. Refer all other servicing to a qualified
service technician, or contact the after sales support centre for advice.
Installation (see pages 9–10 for comprehensive installation instructions)
• Heavy: This appliance is heavy, take care when moving it. To avoid back or other injury,
consider a two person lift or mechanical aid when installing it. Failure to do so can
result in back or other injury.
• Freestanding design: This appliance is designed to be freestanding only and should
not be recessed or built in.
• Keep it upright: Do not tilt the fridge more than 45º from upright when moving it.
• Handle with care: Do not apply force to any part such as the condenser or door.
• WARNING: Ventilation: To ensure proper ventilation, keep any ventilation openings,
in the appliance enclosure or in the built-in structure, clear of obstructions. Ensure
adequate air circulation around the appliance to prevent overheating.
• Level: Install the appliance level in order to ensure proper operation (see page 10).
• Location: Install the appliance in an area that meets the following requirements:
• Ambient temperature: The ambient temperatures must correspond to the climate
class (T) indicated on the rating plate of the appliance (16 °C–43 °C).
• Floor surface: The floor must be sturdy, level (or nearly level) and strong enough to
support the unit when it is fully loaded. If you must position the appliance on carpet,
use a plastic carpet protector underneath the appliance.
• Areas to avoid: Avoid areas where the appliance would be exposed to direct sunlight,
sources of heat (stove, heater, radiator, etc.), extreme cold ambient temperatures or
excessive moisture and high humidity (such as outdoors or exposed to wind, rain
water spray or drips). Installing it in the coolest area of the room will save energy
consumption and running costs.

8po.org
MODEL: STR-H221W1 PRODUCT CODE: 706509 10/2021
AFTER SALES SUPPORT info@tem
AUS 1300 112 534
Product Overview
Top mount refrigerator
1 Freezer wire shelf
2 Freezer temperature control
3 Fridge temperature control
4 Adjustable glass shelves
5 Crisper glass cover
6 Crisper drawer
7 Levelling feet
8 Full-width fridge door balcony
9 Fridge door
10 Half-width fridge door balconies (2)
11 Full-width freezer door balcony
12 Freezer door
Other inclusions (not shown)
Hinge cover (for door reversal)
Instruction manual
Quick start guide
Warranty certificate
NOTE: Due to continued product improvement, images and illustrations in this
manual may vary slightly from the product purchased. All images in this manual are for
reference purposes only. Parts are not necessarily pictured to scale.
1
2
4
5
7
8
9
10
6
3
11
12
Scope of delivery

9
po.org
MODEL: STR-H221W1 PRODUCT CODE: 706509 10/2021
AFTER SALES SUPPORT info@tem
AUS 1300 112 534
Getting Started
Unpacking
• Packaging materials: This product has been packaged to protect it against
transportation damage. Remove all packaging materials from around and inside the
appliance and keep the original packaging carton and materials in a safe place. It
will help prevent any damage if the product needs to be transported in the future,
and you can use it to store the appliance when it is not in use. In the event that the
carton is to be disposed of, please recycle all packaging materials where possible.
Plastic wrapping can be a suffocation hazard for babies and young children, so
ensure all packaging materials are out of their reach and disposed of safely.
• Parts: Check to ensure you have all the parts listed in the Product Overview section.
• Damage: When unpacking, check the appliance carefully for damage. If it is
damaged, do not install the appliance. Contact our after sales support centre for
advice on examination or return of the damaged appliance.
• Power cord: Unwind the power cord to its full length and inspect it for damage.
Do not use the appliance if the appliance or its cord has been damaged or is not
working properly. In case of damage, contact our after sales support centre for
advice on examination, repair or return of the damaged product.
• Read the manual: Before installing your new fridge, read all safety instructions,
especially the sections on installation and electrical safety on pages 6–7. Installation
instructions follow below and on the next page.
Installation
Space requirements
• Door opening: Place the unit so there is enough space for the doors to open easily.
• Clearances: Ensure that air can circulate freely around the back of the cabinet,
which is necessary to cool the compressor and condenser. Allow at least 100 mm
clear space at the back of the unit (Fig. 1) and 50 mm at the sides (Fig. 2).
Fig. 2
50 mm (min)
50 mm (min)
980 mm
910 mm
135°
Fig. 1
100 mm

10 po.org
MODEL: STR-H221W1 PRODUCT CODE: 706509 10/2021
AFTER SALES SUPPORT info@tem
AUS 1300 112 534
Getting Started (Cont.)
Levelling the appliance
The appliance must be installed level so that it can work properly and the magnetic
doors seals are properly aligned. To level the unit, tilt it slightly backward, then adjust
one or both levelling feet at the base of the cabinet (Fig. 3) until the unit is level (Fig. 4).
Fig. 4
• Overhanging wall units: To ensure best performance, if the appliance is positioned
below an overhanging wall unit, the minimum distance between the top of the
cabinet and the wall unit must be at least 100 mm. Ideally, however, the appliance
should not be positioned below overhanging wall units.
Setting up
• Cleaning the interior: Make sure the fridge is disconnected from the power supply
before cleaning the interior. Remove any tape that secured drawers, trays and
shelves during transport. Clean the interior surfaces and all internal accessories
with lukewarm water, a soft cloth and a neutral/mild soap/detergent. This will
remove any dust from transit and storage and help remove the typical smell of a
brand new product. Then dry thoroughly. CAUTION: Do not use harsh or abrasive
detergents or powders as these will damage the finish.
• Before plugging in your new fridge, let it stand upright for at least 4 hours.
This will allow the refrigerant gases to settle into the compressor and reduce the
possibility of a malfunction in the cooling system.
• Connecting the appliance: Plug the unit into a dedicated, properly installed and
earthed wall outlet. WARNING! It must be possible to disconnect the appliance
from the mains power supply; the plug must therefore be easily accessible after
installation. Secure the power supply cord behind the unit. Do not leave it exposed
or dangling to prevent injury and accidental disconnection from the power supply.
• Earthing: The appliance must be earthed. The plug of the power supply cord is
equipped with a contact for this purpose. Do not under any circumstances cut or
remove the third (earth) prong from the power cord. If the plug does not fit your
outlet, please consult a licensed electrician for advice to have the outlet changed.
Fig. 3
Fig. 3
Doors

11
po.org
MODEL: STR-H221W1 PRODUCT CODE: 706509 10/2021
AFTER SALES SUPPORT info@tem
AUS 1300 112 534
Instructions
Temperature regulation
This refrigerator has two separate temperature controls, one in the freezer and one
in the fridge compartment, so you can adjust the temperature in each compartment
separately according to the food stored.
First Use
The first time you turn the unit on, set the temperature control to COLDEST for 2–3
hours before loading the compartments. When the temperature has been reached
and the thermostat starts cycling off and on, adjust the temperature to the settings
that best suit your needs and place food in the compartments.
• Refrigerator: To adjust the fridge tempera-
ture, turn the refrigerator temperature control
dial clockwise towards COLDEST to lower the
temperature and anticlockwise towards COLD
to increase the temperature inside the fridge
compartment (Fig. 5).
A middle setting on COLDER should be
appropriate for normal usage.
• Freezer: To adjust the freezer temperature,
turn the freezer temperature control dial
clockwise towards COLDEST to lower the
temperature and anticlockwise towards COLD
to increase the temperature inside the freezer
compartment (Fig. 6).
A middle setting on COLDER should be
appropriate for normal usage.
• When making ice cubes, or after you have
added larger quantities of unfrozen food, set
the control temporarily to COLDEST for fast
freezing.
Fig. 5
Fig. 6
NOTE:
• The appliance may not operate at the set
temperature on particularly hot days, or if it
is located in a particularly hot area, or if the
door is opened too frequently.
• On hot summer days, when ambient
temperatures are high and the thermostat
is set to a colder setting, the compressor
may run continuously to maintain the low
temperatures in the compartments.

12 po.org
MODEL: STR-H221W1 PRODUCT CODE: 706509 10/2021
AFTER SALES SUPPORT info@tem
AUS 1300 112 534
Fresh food storage
The fridge compartment is suitable for short-term storage of all your fresh food.
• The temperature inside the fridge compartment varies depending on the amount
of food stored and the frequency of door opening. It is low enough to limit some
bacterial growth, but it is not suitable for long-term storage of perishable foods.
• The walls of the fridge are equipped with a series of runners so that you can position
the glass shelves (Fig. 7: A) to suit your individual storage requirements.
• The door balconies in the fridge compartment (Fig. 7: B) are suitable for storage
of food and drink bottles, cans and jars. They may be placed at different heights:
gradually pull a balcony up until it is free, then reposition it as required.
• The easy-to-pull-out crisper drawer is covered with a glass shelf to help you keep
your fruit and vegetables fresh (Fig. 7: C). Slide the humidity regulator (Fig. 7: D) to
the left for low humidity (for example, when storing fruit), or to the right to create a
high-humidity environment which helps keep vegetables crisp.
Instructions (Cont.)
Fig. 7
A
C
D
B
B
B

13
po.org
MODEL: STR-H221W1 PRODUCT CODE: 706509 10/2021
AFTER SALES SUPPORT info@tem
AUS 1300 112 534
Instructions (Cont.)
Fresh food storage tips
• In order to maintain good cooling efficiency and save energy, do not open the doors
for too long or too often.
• Do not overload the fridge.
• Keep enough space around items for cold airflow.
• Do not block ventilation openings.
• Do not place items directly against the back wall.
• Let hot food cool down to room temperature before storing them in the fridge.
Otherwise the cooling capacity will be affected and power consumption increased.
Hot items may also affect the plastic parts inside the appliance.
• If necessary, wipe containers clean and dry before storage in the refrigerator.
• Thaw frozen foods in the fridge compartment to ensure safety and save energy.
• Use sealed containers or storage bags to prevent food from drying out, losing its
taste or taking on aromas from other foods.
• Cover cooked foods and store them on any shelf in the fridge compartment.
• Store butter and cheese in airtight containers, or wrap them thoroughly.
• Make sure milk bottles are properly closed before storage on a door balcony.
• Do not keep bananas, potatoes, onions and garlic in the refrigerator.

14 po.org
MODEL: STR-H221W1 PRODUCT CODE: 706509 10/2021
AFTER SALES SUPPORT info@tem
AUS 1300 112 534
Instructions (Cont.)
The freezer compartment
The freezer compartment, located at the top of the appliance, is equipped with a wire
shelf and door balcony for convenient access and organised storage. It is designed
to operate in ambient (surrounding air) temperatures between 16 °C and 43 °C and
is suitable for freezing domestic quantities of fresh food and long-term storage (up to
three months) of frozen food.
Freezing fresh food
• Do not store food uncovered in the freezer. Always use good quality, freezer-proof
packaging to maintain food quality. Remove air from packages of solid food and seal
bags tightly before freezing.
• Ensure that food placed in the freezer is dated and labelled. This will help you keep
track of storage times.
• Keeping portions small will ensure they are frozen (and subsequently defrosted) rapidly.
• Make sure that fresh, unfrozen food packages do not touch food that is already
frozen, thus avoiding a temperature rise in the frozen food.
• When freezing food, do not push food together too much, leave some space for air
to circulate around each item. Do not place packages directly against the back wall.
• When adding large amounts of fresh food to the freezer, keep in mind that it will take
approximately 24 hours for fresh food to freeze to solid frozen state. For best results,
do not add other fresh food to the freezer drawer during this time.
• Do not place hot foods or liquids which may evaporate in the freezer compartment.
Storing frozen food
• When buying frozen food, only buy quantities that you can store straight away; use
an insulated container/bag for your shopping and when you get home, place the
food in the freezer immediately.
• When storing pre-packed, commercially frozen food, follow the food manufacturer’s
instructions for storing the food in a home freezer. Do not exceed any storage times
listed on the packaging.
• Once you have opened a packet of frozen food, rewrap it airtight to prevent surface
evaporation which causes drying or freezer burn.
• Do not store bottles in the freezer as they may shatter. Do not store carbonated
liquids such as bottles of fizzy drink in the freezer as the container could explode
under pressure and damage the freezer.
• Do not refreeze food once it has been defrosted. If it has thawed accidentally, use it
up immediately or throw it away. Alternatively, if the food is uncooked and has not
been completely defrosted, it may be cooked and then refrozen.
• CAUTION! Do not remove items from the freezer if your hands are damp or wet as
this could cause skin abrasions.

15
po.org
MODEL: STR-H221W1 PRODUCT CODE: 706509 10/2021
AFTER SALES SUPPORT info@tem
AUS 1300 112 534
Instructions (Cont.)
Energy saving tips
• Locate the appliance in the coolest area of the room, away from heat-producing
appliances and out of direct sunlight.
• Let hot foods cool to room temperature before placing them in the freezer.
Overloading the compartments forces the compressor to run longer.
• Wrap foods properly, and wipe containers dry before placing them in the freezer
compartment. This cuts down on frost build-up inside the unit.
• Do not line the storage drawers or shelves with aluminium foil, wax paper or paper
towelling. Liners interfere with cold air circulation, making the appliance less efficient.
• Do not pack food packages close together as this prevents air circulating. Position
packages so that air can circulate freely around them.
• Organise and label food to reduce door openings and extended searches. Remove
as many items as needed at one time and close the door as soon as possible.
• Do not open the door of the fridge or freezer compartment unnecessarily or leave it
open for longer than required, especially during a power failure.
• Do not run the appliance permanently on the lowest temperature setting.
Power failure
• Most power failures are corrected within a few hours and should not affect the
temperature inside your fridge or freezer compartments, if you minimise the number
of times the doors are opened. However, if the power is going to be off for a longer
period of time, you need to take proper steps to protect your food.
• Do not refreeze frozen food without checking its condition first. If in doubt, discard
the food. Do not refreeze food that has thawed completely.
Going away?
• Short vacation: Leave the appliance operating during vacations of less than a month.
• Long vacation: If you are not going to use the appliance for longer periods, remove
all food and unplug the power cord. Clean and dry the interior thoroughly. To
prevent odour and mould growth, leave the door open slightly, blocking it open, if
necessary. (Restrict children’s access to the room with the open appliance to avoid
creating a child entrapment risk.)
Moving the appliance
• Remove all food from inside the fridge and freezer compartments, securely tape
down the drawers and shelves and tape the doors shut. Turn the levelling feet up to
the base to avoid damage.
• Protect the outside of the unit with a blanket or similar soft material and make sure
the appliance stays secure in the upright position during transportation.

16 po.org
MODEL: STR-H221W1 PRODUCT CODE: 706509 10/2021
AFTER SALES SUPPORT info@tem
AUS 1300 112 534
FAQs and Troubleshooting Guide
Problem Possible cause
The appliance does not
operate.
• It is not plugged in. Ensure it is properly plugged
in and there is power at the socket (plug another
appliance into the outlet to check).
• The circuit breaker tripped or has blown a fuse.
• The fridge temperature control is set too warm.
• A general power outage has cut power to your home
(check the household lights).
The appliance turns on and
off frequently.
• The room temperature is hotter than normal.
• A large amount of food has been added to one of the
compartments.
• The fridge or freezer door is opened too often, or not
closed completely.
• The door gasket does not seal properly. Check and
ensure the doors are properly aligned.
• The appliance does not have the correct clearances
around it for air circulation.
There are vibrations. • The appliance is not level.
The appliance seems to
make too much noise.
• A rattling noise may come from the flow of the
refrigerant, which is normal.
• As each cycle ends, you may hear gurgling sounds
caused by the flow of refrigerant.
• Contraction and expansion of the inside walls may
cause popping and crackling noises.
• The appliance is not level. Readjust the feet.
• The appliance is touching the wall or other object.
Move it slightly.
The door(s) will not close
properly.
• The appliance is not level.
• The door gasket is dirty or bent.
• The shelves, drawers or balconies are out of position.
The appliance door will not
open.
• If the door has just been opened, leave it for a few
seconds to allow the air pressure to equalise before
trying again.
If you experience a problem with the appliance, check in the following table for
solutions to help you solve the problem. If none of the solutions offered help you solve
the problem, please contact our after sales support centre for advice.

17
po.org
MODEL: STR-H221W1 PRODUCT CODE: 706509 10/2021
AFTER SALES SUPPORT info@tem
AUS 1300 112 534
FAQs and Troubleshooting Guide (Cont.)
Problem Possible cause
The appliance freezes or
cools too much.
• The temperature is set too cold. Turn it to a warmer
setting temporarily.
Food in the freezer
compartment is not
properly frozen.
• The freezer temperature is set too warm; set it to a
colder setting.
• The freezer door was opened for too long or too
frequently.
• If a large amount of food has been added to the
freezer compartment, turn the temperature control to
a colder setting temporarily.
• The appliance is located near a heat source.
Moisture forms on the
inside or outside walls of
the appliance.
• Hot and humid weather increases the internal rate of
frost build-up. This is normal.
• Open the door less often and make sure it is always
properly closed.
The external appliance
surface is warm.
• The exterior walls can be warmer than room
temperature. This is normal while the compressor
works to transfer heat from inside the fridge or
freezer compartments.
Excessive frost and ice has
built up.
• The freezer door has been left open.
• Something is preventing the door from closing.
• The door gasket is dirty or damaged.
Heavy build-up of frost on
the door seal.
• The door seal is not airtight. Carefully warm the
leaking sections of the seal with a hair dryer (on a
cool setting). At the same time, shape the warmed
door seal by hand until it sits correctly.
The compressor runs
continuously.
• The temperature is set too cold: select a warmer
setting.
• A door is open, or something is obstructing proper
door closure.
• A door gasket is worn, dirty or damaged.
• Large quantities of food have been added to the
appliance.
• The room temperature is hotter than usual.

18 po.org
MODEL: STR-H221W1 PRODUCT CODE: 706509 10/2021
AFTER SALES SUPPORT info@tem
AUS 1300 112 534
Other Useful Information
Cleaning the appliance
For hygienic reasons the appliance interior, including the interior accessories, should
be cleaned regularly.
• Set both temperature controls to the minimum positions and unplug the appliance.
• Remove your frozen and refrigerated food packages from the compartments. Keep
the food temporarily in another fridge or cooler bag to keep defrosting to a minimum.
• Remove all shelves and drawers.
• Wash the inside surfaces and the interior accessories with a damp, warm cloth
moistened in a water and baking soda solution (about 2 tablespoons of baking soda
to 1 litre of water). Wring excess water out of the cloth before cleaning around the
temperature controls or any electrical parts. Rinse and wipe dry with a soft cloth.
• Clean the outside of the unit with a damp, well wrung out cloth.
• Keep the gaskets around the doors clean and free of debris.
• After everything is dry, reinstall the shelves and drawers and place the appliance
back into service.
WARNING!
To reduce the risk of electric shock or injury, always switch off the appliance and
disconnect it from the power supply before cleaning or maintenance.
WARNING!
• Never clean the unit with an abrasive, acid, oil or solvent based cleaning agent, or
with abrasive pads or scourers. Never use flammable fluids or sprays for cleaning
as the fumes from these substances can create a fire hazard or explosion.
• Never clean the appliance with a steam cleaner. Moisture could accumulate in
the electrical components, danger of electric shock! Hot vapours can lead to the
damage of plastic parts.
• The appliance must be completely dry before it is placed back into service.
• Ethereal oils and organic solvents can attack plastic parts, e.g. lemon juice or the
juice from orange peel, butyric acid, or cleansers that contain acetic acid. Do not
allow such substances to come into contact with the appliance parts.
Defrosting the appliance
Manually defrosting the freezer compartment is not necessary as this is a frost-free
appliance which will be defrosted automatically.
Storage
If the appliance is not going to be used for an extended period of time, please store
the unplugged, cleaned appliance safely in the original packaging in a dry location, out
of reach of children.

19
po.org
MODEL: STR-H221W1 PRODUCT CODE: 706509 10/2021
AFTER SALES SUPPORT info@tem
AUS 1300 112 534
Other Useful Information (Cont.)
Door reversal
This appliance has the capability of opening the door from either the left or right side.
If your set-up requires changing the opening direction, please follow the instructions
below.
IMPORTANT!
You will need:
• Make sure you have someone there to help you, do not try to do this on your own.
• Have some soft foam packaging or similar materials (blanket or towels) ready to
lay the refrigerator on when you need access to the base.
• Take the left hinge cover (supplied) out of the small plastic bag.
• You will also need a straight and cross screwdriver and a spanner.
Before you begin:
• Unplug the appliance from the mains electricity supply (if connected).
• Empty all food and shelves out of the appliance (if applicable).
• Adjust the levelling legs to their highest level.
• Keep all parts you remove from one side for reinstallation on the other side.
1. Close the upper (freezer compartment) door.
2. Remove the upper hinge cover and the upper hinge (Fig. 8: A+B).
3. Remove the upper door and place it in a safe position where it will not get
damaged.
4. Remove the pin under the upper hinge and screw it into the opposite side
(Fig. 8: C).
Fig. 8: A Fig. 8: B Fig. 8: C

20 po.org
MODEL: STR-H221W1 PRODUCT CODE: 706509 10/2021
AFTER SALES SUPPORT info@tem
AUS 1300 112 534
Other Useful Information (Cont.)
5. Remove the middle hinge (Fig. 9: A). Remove the lower door and place it in a safe
position so it does not get damaged.
6. Take the middle hinge hole covers from the left side of the appliances and fit them
into the holes where the middle hinge has just been removed (Fig. 9: B).
7. Remove the two adjustable feet and the lower hinge (Fig. 10: A). Unscrew the
pin at the end of the lower hinge, flip the hinge over and screw the back into the
hinge (Fig. 10: B) – it is now on the opposite side. Place the lower hinge at the left
hand side (Fig. 10: C) and refit the two adjustable feet (Fig. 10: D). Place the lower
door on the lower hinge pin.
Fig. 10: A Fig. 10: B
Screw
Fig. 9: A Fig. 9: B
Fig. 10: C Fig. 10: D