Stirling STR-H239W1 User manual

Installation
Let’s get your new
242 L upright fridge ready to use!
Quick Start Guide
Model: STR-H239W1
Connection
1
6
2
3
4
5
B
CAUTION! The fridge is heavy - transport it with care! To avoid back or other injury, we
recommend you ask someone for help or use a mechanical aid when moving it.
Getting it ready for use
Before you start installing the fridge, wipe the interior surfaces and accessories with a
well wrung out cloth moistened with lukewarm water with a little baking soda added.
This will remove any dust from transit and storage and help remove the typical smell of a
brand new product. Dry thoroughly.
Need the doors reversed?
Your new upright fridge has the capability of the door opening from the right or left
side. If your set-up requires reversal of the door swing, please follow the instructions on
pages 16–17 of the supplied manual.
Where to install
The fridge is designed for freestanding use. The floor must be strong, sturdy and level—
adjust the levelling feet, if necessary. Avoid areas where the fridge would be exposed to
direct sunlight, heat, extreme cold ambient temperatures or excessive moisture and high
humidity. Installing it in the coolest area of the room will save energy consumption and
running costs. Allow at least 12 cm clear space at the back and 5 cm at the sides so air
can circulate freely around the fridge.
For comprehensive installation instructions, please consult the manual.
A
Nearly done! Just a bit more on
the other side of this page...
Settling
Before plugging in your new fridge, let it stand upright for at least 4 hours to allow
the refrigerant gases to settle into the compressor.
Power connection
Plug in the fridge and secure the power supply cord behind the unit, making sure
the plug is accessible after installation.
Cool down
When first starting up, and after a period out of use,
allow the unit to cool down on the coldest setting
(7) for at least 2 hours before placing perishable
food in the fridge.

Give us a call
Well done, you made it! Now sit back and relax ... your new 242 L upright
fridge is automatically covered by a 3 year warranty. V1.0
9
8
Location
The control for regulating the temperature in the
fridge is located on the upper right hand side of
the cabinet. The higher the number on the dial, the
colder the temperature.
First use
The first time you turn the fridge on, set the control
to the coldest position (7). After 24 to 48 hours,
adjust it to the setting that best suits your needs – a
middle setting should be appropriate in most cases.
Switching off
To turn the fridge off, first turn the thermostat control to the minimum position (0),
which will stop the cooling cycle, then disconnect the power supply cord from
the wall outlet in order to shut off power to the unit.
The fridge interior
C
7
Thermostat control
D
What? You mean this Quick Start Guide didn’t have ALL the answers? The manual has more
comprehensive instructions, or speak to us. Call our After Sales Support on 1300 112 534.
10
11
12
10
11
12
The refrigerator is suitable for short-
term storage of all your fresh food. The
temperature inside varies depending
on the amount of food stored and the
frequency of door opening.
The walls of the fridge are equipped
with a series of runners so you can
position the glass shelves to suit your
storage requirements.
In order to keep vegetables fresh in the
crisper, make sure they are properly
packaged and the cover sits firmly on
top of the crisper drawer.
The door balconies can be positioned
at different heights in order to fit food
and drink containers of different size.
Simply pull the balconies up and out
from their current position in the door
and replace them securely in a different
spot to suit your storage requirements.