Installation
Let’s get your new
48L bar fridge ready to use!
Quick Start Guide
Model: STR-H48W
Connection
1
6
2
3
4
5
B
CAUTION! The fridge is heavy - transport it with care! To avoid back or other injury,
we recommend you ask someone for help or use a mechanical aid when moving it.
Getting it ready for use
Before you start installing the fridge, wipe the interior surfaces and accessories with
a well wrung out cloth moistened with lukewarm water and a mild detergent. This will
remove any dust from transit and storage and help remove the typical smell of a brand
new product. Dry thoroughly.
Need the doors reversed?
Your new bar fridge has the capability of the door opening from the right or left side.
If your set-up requires reversal of the door swing, please follow the instructions on
pages 18-19 of the supplied manual.
Where to install
The fridge is designed for freestanding use. The floor must be strong, sturdy and
level — adjust the levelling feet, if necessary. Avoid areas where the fridge would be
exposed to direct sunlight, heat, extreme cold ambient temperatures or excessive
moisture and high humidity. Installing it in the coolest area of the room will save energy
consumption and running costs. Allow at least 12cm clear space at the back and 5cm
at the sides so air can circulate freely around the fridge.
For comprehensive installation instructions, please consult the manual.
A
Nearly done! Just a bit more on
the other side of this page...
Settling
Before plugging in your new bar fridge, let it stand upright for a few hours to allow
the refrigerant gases to settle into the compressor.
Power connection
Plug in the fridge and secure the power supply cord behind the unit, making sure
the plug is accessible after installation.
Cool down
When first starting up, and after a period out of use, allow the unit
to cool down on the coldest setting (5) for at least 2 hours before
placing perishable food in the fridge.
