Everglades EVBI630 User manual

REFRIGERATOR
Instruction Manual
Everglades EVBI630
Read and retain these instructions for future reference

1
Dear customer,
Before placing your new refrigerator/freezer into operation please read these operating
instructions carefully. They contain important information for safe use, for installation and
for care of the appliance.
Please keep these operating instructions for future reference. Pass them on to possible
new owners of the appliance.
Notes which are important for your safety or for the proper functioning of the appliance
are stressed with a warning triangle and/or with signal words (W
Warning!, Caution!,
Important!
). Please observe the following carefully.
Supplementary information regarding operation and practical applications of the
appliance appear after this symbol.
Tips and notes concerning economical and environmentally sound use of the appliance
are marked with the cloverleaf.
The operating instructions contain instructions for the correction of possible
malfunctions by the user in the section “Trouble shooting” . If these instructions should
not be sufficient, contact your local Service Force Center.
Printed on paper manufactured with environmentally sound processes he who thinks
ecologically acts accordingly...

2
Contents
Important safety instructions ............................................................................3
Remove transport packaging ...........................................................................5
Installation........................................................................................................5
Building in ........................................................................................................7
Description of the appliance........................................................................... 11
Starting up and temperature regulation.......................................................... 11
Interior accessories........................................................................................12
Switching off the appliance. ...........................................................................13
Cleaning and Care.........................................................................................14
Energy Saving tips .........................................................................................15
Trouble shooting ............................................................................................15
Changing the light bulb ..................................................................................16
Noises during Operation ................................................................................17
Regulations, Standards, Guidelines...............................................................17
Disposal of the appliance...............................................................................17

3
Important safety instructions
These warnings are provided in the interests of your safety. Ensure you fully understand
them before installing or using the appliance.
Your safety is not paramount importance. If you are unsure about the meaning of these
warnings contact the Customer Care Department for assistance.
Intended use
The refrigerator is intended for use in the home. It is suitable for the storage of food at
low temperature. If the appliance is used for purposes other than those intended or used
incorrectly, no liability can be accepted by the manufacturer for any damage that may be
caused.
Alterations or changes to the refrigerator are not permitted for reasons of safety.
If you use the refrigerator in a commercial application or for purposes other than the
cooling of foods, the manufacturer accepts no liability for any damages that may occur.
Prior to initial start-up
Check the appliance for transport damage. Under no circumstances should a damaged
appliance be plugged in. In the event of damage, please contact your supplier.
Refrigerant
The refrigerant isobutene (R600a) is contained within the refrigerant circuit of the
appliance, a natural gas with a high level of environmental compatibility, which is
nevertheless flammable. During transportation and installation of the appliance, ensure
that none of the components of the refrigerant circuit becomes damaged.
The refrigerant (R600a) is flammable.
Caution: risk of fire
If the refrigerant circuit should become damaged:
zAvoid open flames and sources of ignition.
zThoroughly ventilate the room in which the appliance is situated.
The instructions shall include the warnings:
WARNING!
—Keep ventilation openings, in the appliance enclosure or in the built-in
structure, clear of obstruction.
WARNING!
—Do not use mechanical devices or other means to accelerate the
defrosting process, other than those recommended by the manufacturer.
WARNING!
—Do not damage the refrigerant circuit.

4
WARNING!
—Do not use electrical appliances inside the food storage compartments of
the appliance, unless they are of the type recommended by the manufacturer.
WARNING!
—This appliance is not intended for use by persons (including children) with
reduced physical, sensory or mental capabilities, or lack of experience and knowledge,
unless they have been given supervision or instruction concerning use of the appliance
by a person responsible for their safety
WARNING!
—Young children should be supervised to ensure that they do not play with
the appliance
WARNING!
—If the supply cord is damaged, it must be replaced by the manufacturer, its
service agent or similarly qualified persons in order to avoid a hazard.
WARNING!
—When disposing of the appliance, do so only at an authorized waste
disposal centre. Do not expose to flame.
WARNING!
—Please keep the appliance away from substance, which can cause
ignition.
WARNING!
--- Before obtaining access to terminals, all supply circuits must be
disconnected.
WARNING!
--- Please remove all the doors before you dispose your refrigerator.
WARNING!
--- The fridge is only applied with power supply of single phase alternating
current of 220~240V/50Hz. If fluctuation of voltage in the district of user is so large that
the voltage exceeds the above scope, for safety sake, be sure to apply A.C. Automatic
voltage regulator of more than 350W to the fridge. The fridge must employ a special
power socket instead of common one with other electric appliances. Its plug must
match the socket with ground wire.
Safety of children
Packaging (e.g. wraps, polystyrene) can be dangerous for children.
There is a risk of suffocation! Keep packaging material away from children!
Make old appliances unusable prior to disposal. Pull out the mains plug, cut off the
mains cable, break or remove spring or bolt catches, if fitted. By doing this you ensure
that children cannot lock themselves in the appliance when playing (there is risk of
suffocation!) or get themselves into other dangerous situations.
Often children cannot recognize the hazards present in household appliances. It is
therefore important that you ensure adequate supervision and never let children play with
the appliance!
Daily Operation
Containers with flammable gases or liquids can leak at low temperatures. There is a risk
of an explosion! Do not store any containers with flammable materials such as spray
cans, fire extinguisher refill cartridges etc in the refrigerator and/or freezer.
Do not operate any electrical appliances in the refrigerator and/or freezer (e.g. electric ice
cream makers, mixers etc.).

5
Before cleaning the appliance, always switch off the appliance and unplug it, or pull the
house fuse or switch off the circuit breaker.
When unplugging always pull the plug from the mains socket, do not pull on the cable.
In case of malfunction
If a malfunction occurs on the appliance, please look first in the ĀTrouble shootingā
section of these instructions. If the information given there does not help, please do not
perform any further repairs yourself.
Under no circumstance should you attempt to repair the appliance yourself. Repairs
carried out by inexperienced persons may cause injury or serious malfunctioning.
Remove transport packaging
The appliance and the interior fittings are protected for transportation. Pull off the
adhesive tape on the left and right side of the door. You can remove any remnants of
adhesive using white spirit. Remove all adhesive tape and packing pieces from the
interior of the appliance.
Installation
Installation Location
Before installing, carefully read the instruction in the end in order to avoid a certain
number of problems.
Warning: to avoid a hazard due to instability of the appliance, it must be fixed according
to the instructions:

7
Building in
Dimensions of the recess
Height of housing mm 1780
Depth of housing mm 550
Width of housing mm 560
It is necessary that the cabinet has a
ventilation recess with the following
dimensions :
Depth 50mm
Width 540 mm
For appropriate venting, follow indications
in the figure.
1.
Push the appliance into the housing
until stop strip (A) touches the kitchen
unit.
2.
Press in the joint covers between the
appliance and the kitchen furniture (only
on the side without hinge)
3.
Open the door and push the appliance
against the side of kitchen furniture
opposite to that of appliance
hinges. Fasten the appliance with 6
screws provided in the kit included with
the appliance. Snap vent grille (C) and
hinge cover (D) into position.

8
4.
Apply blanking covers (B)as indicated.
5.
Separate parts A,B,C,D as shown in
the figure.
6.
Place guide (A) on the side part of the
furniture door, up and down as shown in
the figure and mark the position of
external holes. After having drilled holes,
fix the guide with the screws supplied.
7.
Fix cover ( C ) on guide (A) until it clips
into place.
8.
Open the appliance door and the
furniture door at 90°.Insert the small
square (B) into guide (A) .Push together
the appliance door and the furniture door
and mark the holes as indicated in the
figure remove the squares and drill holes
with ij2 mm at 8 mm from the outer edge
of the door . Place the small square on
the guide again and fix it with the screws
supplied.
9.
Should the lining up of the furniture
door be necessary , use the clearance of
slots .At the end of operations, it is
necessary to check the door of the
furniture closes properly.

9
10.
Fix cover (D) on guide (B) until it clips
into place.
11.
Loose the screw (G) then adjust and
fasten connecting bracket (E)to the
kitchen furniture by screw (F) Tighten the
screw(G) then put on the cover(H).
The method of fixing the other side is the
same.

10
Positioning
Position the appliance away from sources of heat such as stoves, radiators, direct
sunlight etc. Maximum performance and safety are guaranteed by maintaining the
correct indoor temperature for the class of unit concerned, as specified on the rating
plate. This application perform well in N. The Appliance may not work properly if it is left
for a longer period at a temperature above or below the indicated range.
Climate classification Ambient temperature
SN 10~32ć
N 16~32ć
ST 16~38ć
T 16~43ć
Appliances must not be exposed to rain. Sufficient air must be allowed to circulate in the
lower rear section of appliances, as poor air circulation can affect performance. Built-in
appliances should be positioned away from heat sources such as heaters and direct
sunlight.
Reversing the door
The side at which the door opens can be changed from
the right side (as supplied) to the left side, if the
installation site requires. Tilt the appliance slightly towards
the rear and prop it securely. Unscrew the door hinge
screws and remove the hinge pin bracket. Open the door
a little way and take it out downwards.
Unscrew the upper pin and screw it into place on the opposite side. Fit the door into the
upper pin and close it. Screw the hinge pin bracket securely into place on the opposite
side using the screws.

11
Warning!
When changing the side at which the door opens, the appliance must not be connected
to the mains. Remove plug from the mains beforehand.
Description of the appliance
View of the appliance
1.Butter/cheese compartments with flap and egg storage insert
2.Door storage compartment
3.Temperature regulator
4.Storage shelves
5.Bottle shelf
6.Vegetable drawers
7.Freezen drawers
Note: Due to unceasing product modifications, your refrigerator may be slightly
different from this Instruction Manual. However, all functions and using methods
remain the same.
Starting up and temperature regulation
Insert the plug of the connection lead into the plug socket with protective earth contact.
When the refrigerator compartment door is opened, the internal lighting is switched on.
The temperature selector knob is located on the RH side of the refrigerator
compartment.
Setting 0 means:
Off.
Turning clockwise in direction Refrigerating unit on, the latter then operating
automatically.
Setting 1 means:
Highest temperature, warmest setting.
Setting 7 (end-stop) means:
Lowest temperature, coldest setting.

12
Important!
Normally we advise you select setting of 2 or 3 or 4, if you want the temperature warmer
or colder please turn the knob to lower or higher setting accordingly.
When you turn the knob to lower which can lead to the more energy efficiency.
Otherwise, it would result the energy-consuming.
Important!
High ambient temperatures (e.g. on hot summer days) and a cold setting on the
temperature regulator (position 6 to 7) can cause the compressor to run continuously or
even non-stop!
Reason: when the ambient temperature is high, the compressor must run continuously
to maintain the low temperature in the appliance.
Interior accessories
Storage shelves/wire tray
Various glass or plastic storage shelves and wire trays are included with your appliance -
different models have different combinations.
You should always slide one of the full size glass storage shelves into the lowest set of
guides, above the fruit and vegetable containers, and keep it in this position.
The height of the storage shelves can be adjusted:
To do this, pull the storage shelf forward until it can be swiveled upwards or downwards
and removed.
Please do the same in reverse to insert the shelf at a different height.
IMPORTANT! – in order to make the most of the volume of the fresh food storage
compartment and frozen-food storage compartment, the user can removed one or more
shelves, drawers, out of the appliance, according to your daily use.
Correct storage
1.Ready meals, pastries, and preserves 4.Butter and cheese
2.Meat, salami, cold cuts, dairy produce 5.preserves
3.Cheese storage, fruit, and vegetables 6.Drinks
7.Meat, Cream and other food needed be
frozen

13
Tips:
Food in the refrigerator should always be covered or packaged, to prevent drying and
tainting of other food.
The following are suited for packaging:
Polyethylene airtight bags and wraps,
Plastic containers with lids;
Special plastic covers with elastic,
Aluminium foil.
Defrosting
Why defrosting
Water contained in food or getting into air inside the fridge be opening doors may form a
layer pf frost inside. It will weaken the refrigeration when the frost is thick. While it is more
than 10mm thick, you should defrost.
Defrosting in fresh food storage compartment
It is automatically controlled by switching the temperature regulator on or off so that
there is no need of operation of defrosting. Water from defrosting will be drained into an
drip tray through a drain pipe at the back of the fridge automatically.
Defrosting in frozen-food storage compartment
Defrosting in freezer chamber is operated manually. Before defrosting, take the food out;
take the ice tray and drawers out or put them into the fresh food compartment
temporarily, then set the knob of the temperature regulator to position “0”(where the
compressor will stop working) and leave the door of the refrigerator open until ice and
frost dissolve thoroughly and accumulation at the bottom of the freezer chamber. Wipe
off the water with soft cloth. In the case of speeding up the process of defrosting, you
may put a bowl of warm water (about 50ć) into the freezer chamber, and scrape away
the ice and frost with a defrosting spatula. After doing so, be sure to set the knob of the
temperature regulator to the original position.
It is not advisable to heat the freezer chamber directly with hot water or hair dryer while
defrosting to avoid deformation of the inner case.
It is also not advisable to scrape off ice and frost or separate food from the containers
which have been congealed together with the food with sharp tools or wooden bars, so
as not to damage the inner casing or the surface of the evaporator.
Warning!
Switching off the appliance.
To switch off the appliance, turn the temperature regulator to position ”0”.

14
Important!
The fridge should be defrosted at least every one month. During the using process, if the
door was opened frequently or using the appliance in the extreme humidity, we advise
the user to defrost every two weeks.
If the appliance is not going to be used for an extended period:
Remove all refrigerated packages.
Switch off the appliance by turning the temperature regulator to position “0”.
Remove the mains plug or switch off or disconnect the electricity supply.
Clean thoroughly (see section: Cleaning and Care)
Leave the door open to avoid the build up of odors.
Cleaning and Care
For hygienic reasons the appliance interior, including interior accessories, should be
cleaned regularly.
Warning!
The appliance may not be connected to the mains during cleaning. Danger of electrical
shock! Before cleaning switch the appliance off and remove the plug from the mains, or
switch off or turn out the circuit breaker or fuse.
Never clean the appliance with a steam cleaner. Moisture could accumulate in electrical
components, danger of electrical shock! Hot vapors can lead to the damage of plastic
parts.The appliance must be dry before it is placed back into service.
Important!
Ethereal oils and organic solvents can attack plastic parts, e.g. lemon juice or the juice
from orange peel, butyric acid, cleanser that contain acetic acid.
Do not allow such substances to come into contact with appliance parts.
Do not use any abrasive cleansers.
Remove the food from the refrigerator. Store it in a cool place, well covered.
Switch the appliance off and remove the plug from the mains, or switch off or turn out
the circuit breaker or fuse.
Clean the appliance and the interior accessories with a cloth and lukewarm water.
Commercially available dish washing detergents may also be used.
After cleaning wipe with fresh water and rub dry.
Accumulation of dust at the condenser increases energy consumption.
For this reason carefully clean the condenser at the back of the appliance once a year
with a soft brush or a vacuum cleaner.
Check the water drain hole on the rear wall of the fridge.
Clear a blocked drain hole with the aid of the green peg in the pack of accessories
included with the appliance.
After everything is dry place appliance back into service.

15
Energy Saving tips
1. Do not place warm foods into the appliance. Allow warm foods to cool first. Do
not install the appliance near cookers, radiators or other sources of warmth. High
ambient temperatures cause longer, more frequent operation of the compressor
2. When the product works, please do not open the door too often or leave the door
open any longer than necessary.
3. Do not set temperature any colder than necessary.
4. The direct cooling refrigerator (with a freezer) needs to be defrosted when
necessary. This will improve the cold transfer and reduce energy consumption.
5. The sketch map shows the right combination of the drawers, crisper and shelves
which can lead to the more energy efficiency. If users adjust the combination, it
would result in the energy-consuming.
6. Store food logically. Do not exceed the storage period specified.
Trouble shooting
Correcting Malfunctions
Spare parts:
butter/cheese compartment,
egg holders,
door racks,
fruit and vegetable drawers,
storage racks.
A malfunction may be caused by only a minor fault that you can rectify yourself using the
following instructions. Do not perform any other work on the appliance if the following
information does not provide assistance in your specific case.
Important!
Repairs to refrigerators/freezers may only be performed by competent service engineers.
Improper repairs can give rise to significant hazards for the user. If your appliance needs
repairing, please contact your specialist dealer or your local Service Force Center.
Symptom Possible Cause Remedy
Appliance is not switched on. Switch on the appliance.
Mains plug is not plugged in or is
loose.
Insert mains plug.
Fuse has blown or is defective. Check fuse, replace if
necessary.
Appliance does not work.
Socket is defective. Mains malfunctions are to be
corrected by an electrician.
Appliance cools too much. Temperature is set too cold. Turn the temperature regulator
to a warmer setting
temporarily.

16
Temperature is not properly
adjusted.
Please look in the “initial Start
Up” section.
Door was open for an extended
period.
Open the door only as long as
necessary.
A large quantity of warm food was
placed in the appliance within the
last 24 hours.
Turn the temperature
regulation to a colder setting
temporarily.
The food is too warm.
The appliance is near a heat
source.
Please look in the “installation
location” section.
Interior lighting does not
work.
Light bulb is defective. Please look in the “changing
the Light Bulb “section.
Heavy build-up of frost,
possibly also on the door
seal.
Door seal is not air-tight(possibly
after reversing the door).
Carefully warm the leaking
sections of the door seal with a
hair dryer(on a cool setting). At
the same time shape the
warmed door seal by hand
such that it sits correctly.
Appliance is not level. Readjust the feet.
The appliance is touching the wall
or other objects.
Move the appliance slightly.
Unusual noises.
A component, e.g. a pipe, on the
rear of the appliance is touching
another part of the appliance or the
wall.
If necessary, carefully bend the
component out of the way.
The compressor does not
start immediately after
changing the temperature
setting.
This is normal, no error has
occurred.
The compressor starts after a
period of time.
Water on the floor or storage
shelves.
Water drain hole is blocked. See the “cleaning and care”
section.
Changing the light bulb
Warning!
Before changing the light bulb, switch off the appliance and unplug it, or pull the fuse or
the circuit breaker.
Light bulb data: 220-240V, max. 15 W
To switch off the appliance, set the temperature regulator to position “0”.
Unplug the mains plug.
To change the light bulb, undo the screw.
Press the light bulb cover as shown and slide it backwards.
Change the defective light bulb.
Refit the light bulb cover and the screw.
Put the refrigerator back into operation.

17
Noises during Operation
The following noises are characteristic of refrigeration appliances:
Clicks
Whenever the compressor switches on or off, a click can be heard.
Humming
As soon as the compressor is in operation, you can hear it humming.
Bubbling
When refrigerant flows into thin tubes, you can hear bubbling or splashing noises.
Splashing
Even after the compressor has been switched off, this noise can be heard for a short
time.
Regulations, Standards, Guidelines
This appliance is in accordance with the following EU guidelines:
-73/23/EEC low voltage guidelines.
-89/336/EEC EMC Directive
-2009/125/EC framework for the setting of ecodesign requirements for energy-using
- EC.643/2009. requirements for household refrigerating appliances.
Disposal of the appliance
It is prohibited to dispose of this appliance in domestic household waste.
For disposal there are several possibilities:
a) The municipality has established collection systems ,where electronic waste can be
disposed of at least free of charge to the user.
b) The manufacturer will take back the old appliance for disposal at least free of charge
to the user.
c) As old products contain valuable resources ,they can be sold to scrap metal dealers.
Wild disposal of waste in forests and landscapes endangers your health when
hazardous substances leak into the ground-water and fin their way into the food chain .
Correct Disposal of this product
This marking indicates that this product should not be disposed with other
household wastes throughout the EU. To prevent possible harm to the
environment or human health from uncontrolled waste disposal, recycle it
responsibly to promote the sustainable reuse of material resources. To
return your used device, please use the return and collection systems or
contact the retailer where the product was purchased. They can take this
product for environmental safe recycling.

WARRANTY
You have 2 years warranty on technical defects after purchase
Not included in warranty :
Other than normal domestic use (this appliance is for normal domestic use
only).
Causes not being related directly to the appliance such as;
Damage occurring during transport or because of wrong usage such as
dents, scratches, broken parts.
Installation errors (such as wrong voltage).
Malfunctioning because of improper usage, dust/fluff in and on the
appliance,
amongst others blocking of air circulation, as well as breaking of plastics,
rubber, glass which other than by normal use has gone defect, such to be
judged by the service man and or importer.
You have 2 year warranty on technical defects on the appliance after date of
purchase, warranty is only valid if a valid notice of purchase/invoice can be
shown.
Warranty rights are not transferable.
If appliance is offered for servicing it needs to be clean, otherwise service can
be refused.
18

Everglades EVBI630
COMBI INTEGRABLE
Mode d’emploi
Veuillez lire ce manuel et le conserver pour information

16 16