store away salcombe User manual

Assembly Instructions
store
away
salcombe

SHELF PEG
(SP1) x 128
BRACKET
(AB1) x 12
SCREW
(35-17D) x 104
CASTER (C2) x 14
CAM BOLT
(CB1) x 68
CAM LOCK (CL1) x 68
HARDWARE
PANELS
SHELVES
M-B1 x 2
M-B2
M-CD x 2
M-LHS
M-RHS
M-BOT
M-TOP
12x12 x 6
4\9L x 8
2.5\5L x 12
1.5L x 6
D1-LHS
D1-RHS
D1-CD
D-B1 x 3
D1-TOP
D1-BOT
D1-DOOR
D2-LHS
D2-RHS
D2-CD
D2-TOP
D2-BOT
D
D2-RACK-SIDE
D2-RACK-SH x 2
D2-DOOR
SCREW
(S30) x 2
KNOB (K2) x 2
fold
away
petite
Thank you for purchasing a FoldAway Petite cabinet. If y ou
have any questions regarding assembly please contact us on
0800 048 8606.
HINGE
(H2) x 4
SCREW
(30-15C) x 24
MINI CAM BOLT
(CB2) x 10
SHELF PEG
(SP2) x 8
ACRYLIC x 3

STEP 2
STEP 3
STEP 1
Screw a cam bolt into each of the four holes indicated. These need to be screwed into the
opposite side to the casters.
Screw a cam bolt into each of the four holes indicated on both of the M-CD Panels. Two need into
one side of the panel and two into the opposite side.
Attach six of the casters (C2) to the M-BOT as indicated using screws 35-17D.
M-BOT
M-CD
(SIDE 1)
M-CD
(SIDE 2)
The casters attach to this
side of the panel (the side
showing the part label)
35-17D
screw in to
this point

STEP 4
STEP 5
Attach the both of the M-B1 panels, M-B2 and both of the M-CD together as indicated. Once
slotted together ensure you tighten the cam locks.
Attach the section you have already assembled to the M-BOT as shown below and tighten the cam
locks.
M-B2
M-B1
M-B1
M-CD
TOP
M-CD
TOP
M-B2
M-B1
M-B1
M-CD
TOP
M-CD
TOP

M-RHS M-LHS
STEP 6
Screw a Cam Bolt (CB1) into each of the holes indicated below screw in to
this point
STEP 7
Attach the brackets (AB1) to the left and right hand sides using
screws (35-17D) as shown below.
AB1 35-17D
M-LHS M-RHS

M-B2
M-B1
M-B1
M-CD
TOP
M-CD
TOP
STEP 8
Attach the M-LHS and the M-RHS to the assembled sections. Secure by tightening the cam locks
in the both of the backs (M-B1) and the base (M-BOT).
M-LHS
M-RHS
STEP 9
Fix the brackets that you have already attached to the sides to the base using screws (35-17D) as shown
below.
M-LHS
M-BOT

STEP 10
Screw a Cam Bolt (CB1) into each of the holes indicated below
M-TOP
STEP 11
Attach the M-TOP to the assemble main section. Secure by tightening the cam locks in the both
the M-CD’s and the M-LHS and the M-RHS.
M-B2
M-B1
M-B1
M-LHS
M-CD
M-CD
M-TOP

STEP 10
Insert shelf pegs and shelves to fit the storage boxes as shown below. Start from each section
from the bottom and work upwards when fitting the shelves and boxes to ensure the correct shelf
spacing.
STEP 11
Attach the remaining eight casters (C2) to the D1-BOT and the D2-BOT using screws 35-17D as
shown below.
D1-BOT
D1-BOT
STEP 12
Screw a mini cam bolt (CB2) into each of the four holes indicated with a red circle and a CB1
bolt into each hole indicated with a blue circle. These need to be screwed into the opposite
side to the casters.
D2-BOT
D2-BOT
screw in to
this point
CB2
CB1

TOP
STEP 13
STEP 14
Screw a cam bolt into each of the four holes indicated on the D1-CD Panel. Two need into one
side of the panel and two into the opposite side.
D1-CD
(SIDE 1)
D1-CD
(SIDE 2)
D2-CD
(SIDE 2)
STEP 15
T
OP
D1-CD
Attach two of the D-B1 panels to the D1-CD as indicated. Once slotted together ensure you tighten
the cam locks.
Screw a cam bolt into each of the two holes
indicated on the D2-CD Panel. Some holes
on the panel will be covered DO NOT use
the covered holes.

STEP 16
D1-TOP
Screw a Mini Cam Bolt (CB2) into each of the holes indicated below with a red circle.
Screw a Cam Bolt (CB1) into each of the holes indicated below with a blue circle
STEP 17
Screw a Cam Bolt (CB1) into each of the holes indicated below
D1-RHS
D2-LHS
D2-RHS
D1-LHS
STEP 18
Attach the brackets (AB1) to the D1-LHS, D1-RHS and D2-RHS shown above using screws (35-17D).
Refer to step 7 for detailed instructions of this step.
D2-TOP screw in to
this point
CB2
CB1

STEP 21
D2-BOT
TOP
D2-RHS
Attach the D2-LHS a to the
D2-TOP and the D2-BOT as
shown. Secure by tightening the
cam locks in the D2-LHS.
Then attach the D2-RHS to this
section. Secure by tightening the
cam locks in top and base.
Attach the section that you have already
assembled (D1-CD & 2 x D-B1 panels) to the
D1-TOP and D1-BOT as shown below. Attach by
tightening the locks that will have been pre-in-
stalled into the panels.
D1-LHS
TOP
D1-CD
D1-TOP
D1-BOT
D1-BOT
D1-BOT
D1-BOT
D1-RHS
STEP 20
Attach the D1-LHS and D1-RHS to the
assembled section. Secure by tighten-
ing the cam locks in both of the backs,
top and base.
TOP
D1-CD
D1-BOT
D1-TOP
STEP 19
T
OP
D2-LHS
D2-TOP

STEP 22
STEP 23
STEP 24
D1-DOOR D2-DOOR
Fix the brackets that you have already attached to the sides to the bases of both the door sections
using screws (35-17D). For detailed instructions refer to step 9.
Screw a Cam Bolt (CB1) into each of the holes indicated below. Attach the door knobs. Fit the front
door panels to the assembled sections and tighten the cam locks to secure.
Slide the remaining door
back in the Door 2 section
that you have constructed
and x it the D2-RHS by
tightening the two cam
locks in the back
NOTE: There is only
one back panel in the
door 2 the fascia
forms the back of the
other section as the
1.5L boxes stored in
this are longer and do
not require a back D2-BOT
TOP
D2-BOT
D2-RHS
T
OP
D2-LHS
D2-TOP

STEP 27
Fit the door sections to the main section that is already assembled. Use the hinges (H2)
and screws (30-15C) provided.
STEP 25
Slide the D2-CD into the
door section and tighten
the cam locks in the back
and also the locks in the
D2-CD to secure in place.
you
STEP 26
Screw a Mini Cam Bolt (CB2) into
the two holes on the outer
surface of the D2-LHS as indicat-
ed. Then attach the D2-Rack Side
to this section.
D2-BOT
TOP
D2-BOT
D2-RHS
T
OP
D2-LHS
D2-TOP
TOP
D2-CD
D2-BOT
D2-BOT
D2-RHS
D2-LHS
TOP
D2-CD
D2-TOP
D2-RACK-SIDE

STEP 28
Insert shelf pegs and shelves to fit the storage boxes as shown below
. Start each section from the
bottom and work upwards when fitting the shelves and boxes to ensure the correct shelf spacing.
Insert the acrylic into the slots in the Rack Shelves and D2-BOT panels and then use SP2 shelf
pegs to secure the Rack Shelves into the unit.

www.storage4crafts.co.uk
Freephone: 0800 048 8606
store
away
salcombe