Streetwize SWMAT2 Specification sheet

SWMAT2
Inflatable
SUV Mattress
INFORMATION FOR USE
Thank you for purchasing this Inflatable SUV Mattress from Streetwize. This product is intended for sleeping up
to 2 people in the back of an SUV with rear seat folded down, & comes with two built-in inflatable pillows.
To get best use of this product, we recommend that you read all the information and guidelines in this
document, and retain for future reference.
PRODUCT ELEMENTS
12V INFLATOR/DEFLATOR PUMP INSTRUCTIONS
The air mattress & built-inpillows can all be inflated with the 12V inflator/deflator pump provided (Fig 1).
Ensure you use the correct valve attachment for the component you are
inflating. And also, please ensure you use the inflation outlet marked
on the pump (Fig 2).
To commence inflation, connect the pump to your vehicle’s 12V socket
and start your vehicle. Then ensure the pump is properly connected to
the air valve and switch on the pump.
Inflate all components until they are firm.
Inflatable SUV Mattress with1
built-in pillows
12V inflator/deflator pump2
3-in-1 valve3
Repair kit4
Carry bag5
Fig 2.
Fig 1.
SWMAT2 Manual 2020 AW.qxp_Layout 1 01/02/2021 13:49 Page 2

Streetwize: Ashburton Road West, Trafford Park, Manchester M17 1RY
For product support: E:[email protected]
T: [phone]
For trade enquiries: E: [email protected]
T: [phone]
For spare parts: E: [email protected]
or contact us on our online form: www.streetwizeaccessories.com
EU Registered address: The Ace Supply Co (Europe) Ltd, 25 Herbert Place, Dublin 2, D02 A098 Republic of Ireland.
Over 1000 car & leisure products in our range. To find out more follow us onsocial media.
PLACING THE MATTRESS IN YOUR VEHICLE
When placing the air mattress in your vehicle, first fold the rear seat downwards. Then position the air SUV
mattress into your vehicle.
DEFLATION INSTRUCTIONS
To deflate the air mattress, attach the appropriate valve attachment to the deflator inlet. Connect the pump
to your 12V socket as before then switch on the pump to begin deflation. For deflating the pillows, please
deflate the pillows by hand.
PACKING/STORING THE AIR MATTRESS
When packing & storing the air mattress and its inflatable components, always fold and place back into the
supplied carry bag with the valves open. This allows for any excess air inside the inflatable to come out.
REPAIRS
This product comes with a repair kit. This kit is ideal for repairing small punctures. The kit includes 2 small
patches and a plastic straw.
To repair the small punctures, please see the instructions below.
Inflate the mattress or one of the pillows to locate the puncture.
Once located, clean the area with a suitable cleaning solution
Using the plastic straw, apply heat (i.e. a gas hob lighter) to melt one end of the straw. Then, apply the
melted plastic over the puncture to seal it.
Allow for the plastic to dry and cool, then clean with a suitable cleaning solution.
The small patches are suitable for covering slightly larger punctures. For this, you will need a strong adhesive
like super glue (not included) to bond the patch.
TECHNICAL SUPPORT
If you require any technical support, please contact us on [email protected] and
provide the product name and supplier code (see Technical Specifications) along with the technical query
and proof of purchase.
TECHNICAL SPECIFICATION
Product name Streetwize Inflatable SUV Mattress
Supplier code SWMAT2
Material PVC
Pump input voltage 12V DC
Mattress size 170cm x 125cm x 12cm
SWMAT2 Manual 2020 AW.qxp_Layout 1 01/02/2021 13:49 Page 1