Stromberg Carlson Products BC-104 User manual

Stromberg Carlson Products, Inc.
2323 Traversefield Drive
Traverse City, Michigan 49686
231-947-8600 ext. 108 for Customer Service
[e-mail]
HITCH MOUNT BICYCLE CARRIER
Model BC-104
Maximum Loading Capacity –120 LBS

Stromberg Carlson Products, Inc.
2323 Traversefield Drive
Traverse City, Michigan 49686
231-947-8600 ext. 108 for Customer Service
[e-mail]
Recommended Tools for Assembly:
Open Wrench (2 pc.) Open Wrench (2 pc.) Open Wrench (2 pc.)
Size=17mm Size=19mm Size=24mm
Assembly Instructions
STEP 1 Attach Elbow Plate (part #2) onto the Hitch Base (part #1) using M16x80 Bolt (part #4), and M16 Nut
(part #5). Next, insert Pin (part #6), using “R”Pin (part #7) to secure it. Attach Center Support (part #3) into
Elbow Plate using (2) M12x80 Bolts (part #8) and (2) M12 Nuts (part #9). See FIG. 1
STEP 2 Attach Elbow Support (part #10) onto the Center Support by using an M10x65 Bolt (part #12) and
M10 Nut (part #13). Next, connect the Bike Holder Tube (part #11) onto the Elbow Support with an M10x65
Bolt (part #12) and M10 Nut (part #13). See FIG. 2
STEP 3 Next, place (2) “W”Plates (part #14) onto the Elbow Support and the Bike Holder Tube, using (2)
Handles (part #15) to secure. Insert the Reflector (part #16) into the Bike Holder Tube. See FIG. 3
FIG. 1 FIG. 2 FIG. 3

Stromberg Carlson Products, Inc.
2323 Traversefield Drive
Traverse City, Michigan 49686
231-947-8600 ext. 108 for Customer Service
[e-mail]
Carton Contents and Assembly Diagram
Part #
Description
Qty
1
Hitch Base
1
2
Elbow Plate
1
3
Center Support
1
4
M16X80 Bolt
1
5
M16 Nut
1
6
Pin
1
7
"R" Pin
1
8
M12X80 Bolt
2
9
M12 Nut
2
10
Elbow Support
1
11
Bike Holder Tube
1
12
M10X65 Bolt
2
13
M10 Nut
2
14
"W" Plate
2
15
Handle
2
16
Reflector
1
* THIS BIKE RACK IS BUILT TO BE STRONG AND ECONOMICAL. IT MAY BE DIFFICULT TO MOUNT CERTAIN FRAME DESIGNS TO
THIS CARRIER. FURTHER, BIKES WILL HAVE CONTACT WITH EACH OTHER ON THIS BIKE CARRIER DESIGN. IF THIS CONCERNS
YOU, PLEASE SEE OUR BIKE RACK MODEL BC-204.