Strong SRT 32HC4043 User manual

User Manual
Bedienungsanleitung
Manuel utilisateur
Manuale utente
Manual do Utilizador
Инструкции за употреба
Руководство пользователя
Посібник користувача
Användar Manual
Uživatelská příručka
Navodila za uporabo
Korisnički priručnik
Uputsvo za rukovanje
Používateľská príručka
Használati útmutató
Käyttöohje
Brukermanual
Manual del Usuario
Gebruiksaanwijzing
Brugervejledning
Manual de Utilizare
Instrukcja obsługi
www.strong.tv
LED TV WITH DVB-T2/C/S2
SRT 32HC4043

Supplied by STRONG Austria
Represented by STRONG Ges.m.b.H.
Franz-Josefs-Kai 1
1010 Vienna, Austria
Email: [e-mail]
www.strong.tv
14 Apr 2023 15:12
SERVICE CENTER
AT
HU
PL
PT
SK
UA
SL
NL
IT
BG
ES
CZ
DE
DK
FR
HR
[email protected]
0820 400 150
(€ 0,12/Min. österr. Festnetz)
[email protected]
[phone]
[email protected]
801 702 017
[email protected]
[phone]
[email protected]
0850 15 05 50
[email protected]
[phone]
[phone]
[email protected]
[email protected]
199 404 032
Da rete ssa 24,8 cent. al min.
12,5 cent. scao alla riposta
Da rete mobile max 49 cent. al min.
15,6 cent. scao allo risposta
[email protected]
[phone]
[email protected]
[phone]
[email protected]
844 44 44 90
[email protected]
0180 501 49 91
(€ 0,14/Min. deutsches Festnetz)
(€ 0,42/Min. max. Mobilfunknetze)
[email protected]
[email protected]
[phone]
www.strong.tv

Licenses
This product contains one or more programs protected under international and U.S. copyright laws as unpublished works. They are condential and
proprietary to Dolby Laboratories. Their reproduction or disclosure, in whole or in part, or the production of derivative works therefrom without the
express permission of Dolby Laboratories is prohibited. Copyright 2003-2009 by Dolby Laboratories. All rights reserved.
THIS PRODUCT IS SOLD WITH A LIMITED LICENSE AND IS AUTHORIZED TO BE USED ONLY IN CONNECTION WITH HEVC CONTENT THAT MEETS
EACH OF THE THREE FOLLOWING QUALIFICATIONS: (1) HEVC CONTENT ONLY FOR PERSONAL USE; (2) HEVC CONTENT THAT IS NOT OFFERED FOR
SALE; AND (3) HEVC CONTENT THAT IS CREATED BY THE OWNER OF THE PRODUCT. THIS PRODUCT MAY NOT BE USED IN CONNECTION WITH HEVC
ENCODED CONTENT CREATED BY A THIRD PARTY, WHICH THE USER HAS ORDERED OR PURCHASED FROM A THIRD PARTY, UNLESS THE USER IS
SEPARATELY GRANTED RIGHTS TO USE THE PRODUCT WITH SUCH CONTENT BY A LICENSED SELLER OF THE CONTENT. YOUR USE OF THIS PRODUCT IN
CONNECTION WITH HEVC ENCODED CONTENT IS DEEMED ACCEPTANCE OF THE LIMITED AUTHORITY TO USE AS NOTED ABOVE.
SIMPLIFIED EU DECLARATION OF CONFORMITY
Hereby, STRONG declares that the radio equipment SRT 32HC4043 is in compliance with Directive 2014/53/EU.
The full text of the EU declaration of conformity is available at the following internet address:
https://www.strong.tv/en/doc
Subject to alterations. In consequence of continuous research and development technical specications, design and appearance of products may
change. Manufactured under license from Dolby Laboratories. Dolby, Dolby Audio and the double-D symbol are trademarks of Dolby Laboratories. The
terms HDMI, HDMI High-Denition Multimedia Interface, and the HDMI Logo are trademarks or registered trademarks of HDMI Licensing Administrator,
Inc. Wi-Fi is a registered trademark of Wi-Fi Alliance®. Netix is a registered trademark of Netix, Inc. YouTubeTM is a trademark of Google Inc. All product
names are trademarks or registered trademarks of their respective owners.
© STRONG 2023. All rights reserved.
1

TABLE OF CONTENTS
1.0 INSTRUCTION 3
1.1 Safety Instructions 3
1.2 Storage 3
1.3 Accessories 3
1.4 Equipment set-up 3
2.0 INSTALLATION 4
2.1 Default PIN code: 1234 4
2.2 Front panel/underside 4
2.3 Side panel 4
2.4 Remote control 4
2.5 Installing the batteries 5
2.6 Using the remote control 5
3.0 FIRST TIME INSTALLATION 5
3.1 DVB-S/S2 installation 5
3.2 DVB-T/T2 installation 6
3.3 DVB-C installation 6
4.0 ELECTRONIC PROGRAMME GUIDE EPG 6
5.0 MENU SETTINGS 6
5.1 Menu control (DTV mode) 6
5.2 Picture menu 6
5.3 Sound menu 7
5.4 Channel 7
5.5 Time menu 8
5.6 Lock 8
5.7 Setup Menu 8
6.0 USB 9
6.1 Reminder when using the USB player 9
6.2 USB menu 9
7.0 TROUBLESHOOTING 10
8.0 SPECIFICATIONS 12
To obtain the best performance and safety, please read this manual carefully. Please keep this manual for future reference.
2

1.0 INSTRUCTION
1.1 Safety Instructions
Read all of the instructions before operating the set. Keep these instructions well for later use.
 Only use attachments/accessories specied or provided by the manufacturer (such as the exclusive supply adapter, battery etc.).
 Please refer to the information on the exterior back enclosure for electrical and safety information before installing or operating the apparatus.
 To reduce the risk of re or electric shock, do not expose this apparatus to rain or moisture.
 The ventilation should not be impeded by covering the ventilation openings with items, such as newspaper, table-cloths, curtains, etc.
 The apparatus shall not be exposed to dripping or splashing and no objects lled with liquids, such as vases, shall be placed on the apparatus.
 The mark indicates a risk of electric shock. The external wires must be installed by an instructed person or ready-made leads or cords
must be used.
 To prevent injury, this apparatus must be securely attached to the oor/wall in accordance with the installation instructions.
 Danger of explosion if the battery is incorrectly replaced. Replace only with the same or equivalent types.
 The battery (battery or batteries or battery pack) shall not be exposed to excessive heat such as sunshine, re or the like.
 Excessive sound pressure from earphones and headphones can cause hearing loss.
 Listening to music at high volume levels and for extended durations can damage one's hearing.
 In order to reduce the risk of damage to hearing, one should lower the volume to a safe, comfortable level, and reduce the amount of time
listening at high levels.
 The mains plug or appliance coupler is used as disconnect device, it shall remain readily operable. When not in use and during movement,
please take care of the power cord set, e.g. tie up the power cord set with cable tie or something like that. It shall be free from sharp edges or
similar which can cause abrasion of the power cord set. When put into use again, please make sure the power cord is not damaged. In case of
damages, please get the power cord replaced by a similar one with the same specications. The absence of a light indication on the apparatus
does not mean that it is fully disconnected from the mains. To disconnect the apparatus completely, the mains plug must be pulled out.
 Attention should be drawn to environmental aspects of battery disposal.
 No naked ame sources, such as lighted candles, should be placed on the apparatus.
 To prevent the spread of re, keep candles or other open ames away from this product at all times.
 A USB terminal can provide a maximum of 500 mA.
 Equipment with this symbol is a Class II or double insulated electrical appliance. It has been designed in such a way that it does not
require a safety connection to electrical earth.
Operating Environment
 Do not install this equipment in a conned space such as a bookcase or similar unit.
 Do not use the set near damp, and cold areas, protect the set from overheating.
 Keep away from direct sunlight.
 Do not use the set near dust place.
 Do not attach candle to accessible opening area, to avoid ammable foreign material from entering the TV.
WEEE Directive
Correct Disposal of this product. This marking indicates that this product should not be disposed with other household wastes throughout the
EU. To prevent possible harm to the environment or human health from uncontrolled waste disposal, recycle it responsibly to promote the
sustainable reuse of material resources. To return your used device, please use the return and collection systems or contact the retailer where
the product was purchased. They can take this product for environmentally safe recycling.
1.2 Storage
Your device has been carefully checked and packed before shipping. When unpacking it, make sure that all the parts are included and keep the
packaging away from children. We recommend that you keep the carton during the warranty period, to keep your device perfectly protected in the
event of repair or warranty.
1.3 Accessories
1. 1x installation instructions
2. 1x safety instructions/warranty cards
3. 1x remote control
4. 2x AAA batteries
1.4 Equipment set-up
Fig.1a
Install the display on a solid horizontal surface such as a table or desk. For ventilation, leave a space of at least 10 cm free all around the set. To prevent
any fault and unsafe situations, please do not place any objects on top of the set. This apparatus can be used in tropical and/or moderate climates.
3

Stand assembly instruction
Fig.1b
1. Carefully place the TV with its front side facing down on a cushioned at surface in order to protect the TV and the TV screen from damage.
2. Take out the 2x stand feet and assemble them to the TV.
3. Fasten the feet to the bottom of the TV using the 4x ST4*20mm (32’’) screws.
Fig.1c
This user manual provides complete instructions for installing and using this TV. The symbols serve as follows.
WARNING Indicates warning information.
NOTE Indicates any other additional important or helpful information.
MENU Represents a button on the remote control or the TV.
(Bold characters)
Move to Represents a menu item within a window.
(Italic characters)
2.0 INSTALLATION
2.1 Default PIN code: 1234
2.2 Front panel/underside
Fig.2
NOTE: The graphics are for representation only.
1. Power indicator /remote sensor
2. Speakers
3. Buttons: Input source, Menu, V-/V+, CH-/CH+, Standby/ON.
4. Power switch ON/OFF
2.3 Side panel
NOTE: The graphics are for representation only.
Fig.3d
1. USB 2.0 Connect a USB device for playback of multimedia les
2. COMMON INTERFACE
Connect a Conditional Access Module (CAM).
3. EARPHONE Speakers will be muted when earphone is plugged in and headphone selected.
4. AV IN 3.5 mm female jack entry for composite video and left/right audio connection.
5. HDMI 1 Connect HDMI input signal from a signal source such as DVD, Blu-ray player or game console.
6. HDMI 2 (ARC) Connect HDMI input signal from a signal source such as DVD, Blu-ray player or game console or directly to a Digital Amplier
that supports the ARC function. This input is equipped with the ARC (Audio Return Channel) feature to implement audio
connections and for a full Dolby audio support.
7. SATELLITE IN Connect a satellite dish to the TV for searching programmes.
8. ANTENNA IN Connect a terrestrial antenna or cable connection from your provider to the TV for searching programmes.
9. S/PDIF (OPTICAL)
Use an optical cable to connect your TV to a compatible digital amplier or Home theatre set.
2.4 Remote control
Fig.4
1. qPress to turn the TV on or standby.
2. !Press to mute or restore the volume.
3. 0 ~ 9 Choose channel directly.
4. ECO Select desired power saving mode.
5. EPG Press to display the current EPG information in DTV mode.
6. VOL +/ Adjust the volume up or down.
7. SMART KEY Press to open extra options.
8. CH +/ Change programmes up or down. Big steps in Channel list.
9. INFO Display information about the current source.
4

10.SOURCE Select the input source mode.
11.RETURN Step back in some menu options
12.MENU Open the menu options. Step back in some menu options.
13.Exit the current menu.
14.
pq tuNavigate the menu.
15.OK Conrm the selection.
16.TEXT Press to enter or exit the teletext menu.
17.SUBTITLE Enable/disable subtitles in DTV/USB mode.
18.LIST Press to enter into the channel list.
19.FAV Press to view your assigned favourite list or main list channels. Press pq to cycle through your assigned favourite channels,
press OK to conrm. To open the selected list directly, you can press the LIST button.
20.20. COLOUR BUTTONS
Press to execute the prompt function in TV or DTV menu mode.
2.5 Installing the batteries
Fig.5
Place 2x AAA batteries in the battery compartment of the remote control. Make sure to match the polarity markings inside the compartment.
NOTE: Pictures are only for reference. Actual items may dier.
1. Slide the cover horizontally.
2. Put 2x AAA batteries in the compartment and make sure the polarity is correct.
3. Slide horizontally to close the cover.
Precautions for using the battery
Improper using of the battery will cause leakage. Carefully follow these instructions.
1. Please note the batteries' polarity to avoid short circuit.
2. When the battery's voltage is insucient which aect the use range, you should replace it with a new battery. Remove the batteries from the
remote control unit if you do not intend to use it for a long time.
3. Do not use dierent types of batteries (for example Manganese and Alkaline batteries) together.
4. Do not put the battery into re, and charge or decompose the battery.
5. Please dispose batteries abide by relevant environmental protection regulation.
2.6 Using the remote control
 Use the remote control by pointing it towards the remote sensor. Items between the remote control and the remote sensor could block normal
operation.
 Do not cause the remote control to vibrate violently. Also, do not splash liquid on the remote control, also do not put the remote control in a
high humidity place.
 Do not place the remote control under direct sunlight which will cause deformation of the unit by heat.
 When the remote sensor is under direct sunlight or strong lighting, the remote control will not work. If so, please change the lighting or TV's
position, or operate the remote control closer to the remote sensor.
3.0 FIRST TIME INSTALLATION
After all connections have been properly made, switch on your TV. The language selection will appear on screen. Use pq tuto select the OSD
Language of your preference. Conrm with OK on your remote control.
The next screen appears with the Mode Selection to select Home Mode or Shop Mode. Press OK and tuto conrm.
Then the next screen appears with the tuner selection. Choose the one you like to use.
Scan type Select which input source you want to use: DVB-S to receive satellite broadcasts (and if you are equipped with a satellite dish),
DVB-T to receive terrestrial broadcasts or DVB-C to receive cable broadcasts.
3.1 DVB-S/S2 installation
Satellite Setting
First select the region where you are using the TV. This important to set time zone correct. Use the tupq and conrm with OK.
Press pq to highlight the satellite your dish is aimed at. Conrm with OK to mark the satellite. Use the tupq buttons to change settings for your
satellite installation for each specic satellite. The signal quality bar on the bottom of the screen allows you to ne tune the alignment of your antenna
for optimum reception. Adjust your antenna for maximum possible signal quality. When the signal cannot be improved anymore, x the dish on this
position and press the BLUE Scan button to continue.
Channel Search
Press pq tuto highlight the options of choice and press OK to start the channel search.
Scan Mode Choose between Default (recommended), Blind Scan, Network and Preset Channel List.*
5

Crypted Select FTA Channels to search Free-To-Air channels only or All Channels to search FTA and Encrypted channels
Service Type Select DTV to search DTV channels only, RADIO to search radio channels only or All for a complete search.
It is recommended to use the default settings.
3.2 DVB-T/T2 installation
Terrestrial Setting
First select the Tune Type by pressing tuto select DTV, ATV or DTV+ATV (DTV to search digital broadcasts and ATV to search analogue broadcasts).
Press qto continue. Press tuto select All Channels or FTA Channels. Press pq tuto highlight the country that you want to install, then press OK to
start searching.
3.3 DVB-C installation
Cable Setting
Press pq tuto highlight your settings.
Scan type You can select Network Scan or Full. (Default Network Scan for quick search advised)
NOTE: Full scan will have a duration of approximately 20 minutes, depending on your cable network.
Frequency Please enter (with 0 ~ 9) the main frequency used by your provider in KHz.
Network ID Please enter (with 0 ~ 9) the used Network ID from your provider.
Symbol Please enter (with 0 ~ 9) the used Symbol from your provider. (Ks/s)
NOTE: Please check the settings for your cable system used by your provider!
Press OK to continue.
Crypted Select FTA Channels to search Free-To-Air channels only or All Channels to search FTA and encrypted channels
Press pq tuto highlight the country that you want to install, then press OK to start searching.
4.0 ELECTRONIC PROGRAMME GUIDE EPG
EPG stands for Digital Electronic Programme Guide. It is supplied by the programme providers and oers information on broadcasted programmes.
You can access it in digital mode by pressing EPG on the remote control. Press EPG to bring up the EPG interface. Use pq to select a programme. Press
EXIT to stop and return to viewing modes.
Then press the COLOUR BUTTONS for entering the required settings.
GREEN Access extra info of programme
YELLOW Open the reminder setting over view
BLUE Set reminder of selected programme.
5.0 MENU SETTINGS
Below items depend if they are available of select input source. Use INPUT to select another source.
5.1 Menu control (DTV mode)
Press MENU to enter the main menu. Press tuto select an item. Press pq and OK to select the submenus. Press MENU to exit the item.
5.2 Picture menu
Picture Mode Select the automatic picture control mode. Available choices are Dynamic, Standard, Mild and User.
Colour Temperature Select the overall colour tone of the picture. Available choices are Cool, Medium, Warm and User.
Aspect Ratio Select the aspect ratio (display proportions) according to your video signal type or preference. Available choices are Auto,
4:3,16:9, Zoom1 and Zoom2. Note: Some options may not be available under some sources.
Noise Reduction Eliminates noise in the picture. Available choices are O, Low, Middle and High.
In the User mode, settings can be changed for Brightness, Contrast, Colour and Sharpness.
5.2.1 Contrast/Brightness/Colour Tint/Sharpness
If Picture Mode is set to Personal you are able to change the following settings
Press pq to select an option, then press tuto adjust.
6

Contrast Adjust the highlight intensity of the picture, but the shadow of the picture is invariable.
Brightness Adjust the optical bre output of the entire picture, it will aect the dark region of the picture.
Colour Adjust the saturation of the colour based on your own preference.
Tint No function
Sharpness Adjust the peaking in the detail of the picture.
5.2.2 Colour Temperature
In this menu you can change the overall colour cast of the picture.
Press pq to select Colour Temperature, then press OK to enter a sub-menu. Press pq to select the relevant picture eect (DEFAULT: Cold Normal
Warm).
Cold lncrease the blue tone for the white.
Normal Increase the neutral colours for the white.
Warm lncrease the red colour for the white.
5.2.3 Noise Reduction
In this menu you can lter out and reduce the image noise and improve picture quality. Press pq to select Noise Reduction, then press OK to enter a
sub-menu.
O Select to turn o video noise detection.
Low Detect and reduce low video noise.
Middle Detect and reduce moderate video noise.
High Detect and reduce enhanced video noise.
Default Set as Default.
5.3 Sound menu
Sound Mode Select your favourite sound mode for each input. Choices are Standard, Music, Movie, Sports and User.
Bass Adjusts the lower frequency of the sound.
Treble Adjusts the higher frequency of the sound.
Balance Control the sound balance between the right and left loudspeaker (earphone).
Auto Volume Adjust the volume corresponding to the input audio level. Options are On and O.
Surround Sound Turns on the Sound Retrieval System.
AD Switch Turn on the Audio description, you can activate the setting of AD volume. When turn on the audio description, a narrator will
describe what is happening on the screen for blind or visually impaired viewers. (Only if available in DTV mode.)
S/PDIF Mode If you have connected S/PDIF output to digital home audio system. You can select “Auto”to output Dolby audio automatically. If
channel have this audio channel.
5.4 Channel
Press MENU to display the main menu. Press tuto select Channel in the main menu. Press pq to select the option you wish to adjust in the Channel
menu.
Press OK to adjust. After nish your adjustment, press OK to save and return to the previous menu. Below items depend if they are available of select
input source. Use INPUT to select another source.
5.4.1 Auto Tuning
Press pq to select Auto Tuning, select the Scan Type and proceed with OK.
5.4.2 Dish Setup
If you use DVB-S/S2 as input source, the Dish Setup menu allow you to set you satellite and belonging settings as DiSEqC port and LNB type. Afterwards
you may start the Auto Tuning or Manual Tuning by selecting with EPG button the wanted transponder.
5.4.3 DTV Manual Tuning (in DVB-T mode only)
Search and store programmes manually. Press pq to select DTV Manual Tuning. Then press OK to enter the sub-menu.
Press tuto select a Channel No., and then press OK to start the search. The search stops when a programme is found and this programme will be
stored in the current channel position. If you want to stop the search, press MENU.
7

5.4.4 ATV Manual Tuning (in DVB-C mode only)
First select the source type of ATV. Then in the Channel menu, select ATV Manual Tuning and press OK to access. Highlight and press pq to select
Storage To 1 (maybe other number), Sound System and Channel No.. Then select search and press OK to start the search. Press ufor the unit to search
towards higher frequency. Press tfor the unit to search towards lower frequency. The search stops when a programme is found and this programme
will be stored in the current channel position. If you want to stop the search, press MENU.
Current CH Set the channel number
Colour System Select the colour system (Available: AUTO, PAL, SECAM)
Sound System Select the Sound system
Fine-Tune Adjust the frequency of the channel
Search Start the channel search
5.4.5 Channel extra settings
Programme Edit Edit the programmes. You can press the COLOUR BUTTONS on the remote control to skip programmes, rename and delete
programmes or move programmes, and add programmes to the favourite list by pressing FAV.
Signal Information Showing the information of current DTV channel. Only available with DTV signal.
Cl information Enables the user to watch and change settings of CAM modules and check values from inserted smart card.
Channel list Select which channel list you like to see if you press on LIST button. Select between Main List or Favorite List
Schedule List Press pq in the Channel. Select Schedule List, then press OK to enter the sub-menu. Use the COLOUR BUTTONS to modify
your settings.
Software Update (USB) Press OK and use tuto select Yes if you want to update the software or No to go back to the main menu. For more information
see also chapter 6.2.5.
NOTE: To modify the order of the channels contained in the channel list do as follow: press Menu and OK to select Program Edit (it is
also possible access this option by pressing PROG button on the remote control).
To move a channel, select it by using pq or CH +/ button then press YELLOW button. Now, there are two dierent ways to move the channel:
Enter the number of the new position by using the 0 ~ 9 buttons on the remote control and conrm with OK or YELLOW. The selected channel will be
automatically moved to the new position.
Press pq button and move the channel in a position of your choice. Conrm with OK
5.5 Time menu
Press MENU to display the main menu. Press tuto select TIME in the main menu. Press pqto do further adjustments. Press OK to return to the
previous menu.
Clock The time is automatically obtained from the channel transmission and doesn't have to be set manually. Should this function not
be provided by the broadcaster, it is possible to set it by pressing OK and set date and time by pressing pq tu.
Time Zone Press pqtuto select Time Zone.
Sleep Timer Press pqto select Sleep Timer. Available Options: O, 10 min., 20 min., 30 min., 60 min., 90min., 120 min.,180 min. and 240 min..
Auto Standby This function allows you to set the automatic shutdown of your TV. Choose between 2H, 3H, 4H or O to disable this function.
OSD Timer This function allows you to choose how long the info banner is displayed. Choose between 5s, 15s or 30s.
5.6 Lock
Press MENU to display the main menu. Press tuto enter the Lock menu settings. Press pqto select the options. The following options are available:
System Lock This option allows you to enable or disable the password protection. Press OK to set this function On or O.
Set Password The default password is 1234, to customize the password press OK and follow the instruction within the menu.
Channel Lock This option allows you to prevent viewing of one or more channels. Press OK to display the channel list and select with pq the
channel you want to be locked. Press GREEN to lock it. Consider the same procedure to lock other channels if needed.
Parental Guidance Press OK to enter and set the age for suitable programmes for children, then press pq.
5.7 Setup Menu
Language Select the Menu language of your choice. The default setting is English. Press pq to select the menu language.
Audio Languages Press tuto select Primary for main audio track or Secondary next audio channel if rst is not available. Press pq tuto select
your chosen Audio Language, then press OK.
Subtitle Language Press pq tuto select your chosen Subtitle Language, then press OK
Country This item shows the region you been selected by rst time you install the TV.
Restore Factory Default Press
pq to select this function, by pressing OK and enter the PIN code. You will reset all the settings contained in the main
menu and deleted all installed channels. TV will go back to First Time Installation See chapter 3.
8

Version Information Your current software version is displayed.
HDMI CEC See chapter 5.7.1.
Home /Shop Switch between Home modes and Shop modes with default more brightness and Auto standby to o.
USB Clone This option allows you to copy you channel list to USB device as back up. Insert USB device and select Back up. To load this later
back into TV, select“Restore”.
5.7.1 HDMI CEC
CEC Control Press tuto turn the HDMI CEC On or O.
Audio Receiver Press tuto turn the Audio Receiver On or O.
Device Auto Power O Press tuto turn on this feature. When nished turn o your TV. The connected device will turn o automatically.
TV Auto Power On Press tuto select this option. When nished, turn on the connected device. The TV will switch on automatically.
Device List Press OK to open the main menu of device.
Device Menu Access the device menu.
6.0 USB
6.1 Reminder when using the USB player
Some USB storage devices may not be compatible to operate smoothly with this TV.
Back up all of the data in the USB storage device in case data is lost due to an unexpected accident. STRONG does not assume any liability for the losses
by misuse or malfunction. Data backup is consumer's responsibility.
For large le sizes, the loading speed may be slightly longer.
The recognition speed of a USB storage device may depend on each device.
When connecting or disconnecting the USB storage device, make sure the TV is not in USB mode otherwise the USB storage device or the les stored in
it may be damaged.
Please use only a USB storage device which is formatted in FAT16, FAT32, NTFS (playback only) le system provided with the Windows operating system.
In case of a storage device formatted as a dierent utility programme which is not supported by Windows, it may not be recognized.
When using a USB Hard Disk Drive which is not powered independently, ensure its power does not exceed 500 mA. Otherwise the TV system will
change into standby mode, and you must pull out the USB Hard Disk and restart the TV system.
An“Unsupported File” message will be displayed if the le format is unsupported or the le is corrupted.
FHD big picture needs longer time to process, which is not caused by the TV. Please be patient.
This TV may not support some multimedia les changed and upgraded as the change of the encoding format or other technical aspects advances.
Please refer to chapter 9. Appendix for a list of supported le formats for USB playback.
6.2 USB menu
Press SOURCE and select USB. You can view movie, music and photo les from your USB storage devices. Connect a USB storage device to the USB
input terminal and select the types of media on the home page: Movie, Music, Photo and text. Press OK, the screen will show the connected USB device,
press OK again to view the le folders and les. Press pq or tuto select a folder, press OK to open the folder and select the les. Highlight the one
you want to play or watch or press directly u2to start playing directly. Press 3to stop playing and return to upper lever folder. Continuously press
RETURN to go back to upper level folder. Repeat again to select and play another media type.
NOTE: By choosing one of the three media types, for example Movie, the folders inside will display only video les and no other
formats.
6.2.1 Play movies
Fig.6
During playback, press INFO or OK to display/exit the menu bar (Fig.6). Press the USB control buttons on the remote control to do relevant operations.
Play & Pause/Stop/Prev./Next
Press u2to play or pause the playback. Press 3to stop playing. Press 7 8 to play the previous or the next video le. Press
INFO and use tuto highlight the corresponding icon on the control bar, then press OK. The TV will response accordingly.
Fast Reverse/Fast Forward Press and hold 5 6 for seconds to draw the playing progress as your desire, then press u2to start the playing from
the new position.
Play Mode Highlight the corresponding icon and press OK to switch to another play mode.
Information Highlight the corresponding icon and press OK to view the information of the playing video.
Aspect Ratio Highlight the button and press OK to select the display mode.
9

6.2.2 Play music
Fig.7
Press INFO or OK to display/exit from the menu bar (Fig.7). Press the USB control buttons on the remote control to do relevant operations.
Play & Pause/Stop/Previous/Next
Press u2to play or pause the playback. Press 3to stop playing. Press 7 8 to play the previous or the next music le. Press
tuto highlight the corresponding icon on the control bar, and then press OK. The TV will response accordingly.
Fast Forward/Fast Reverse Press and hold 5 6 for seconds to draw the playing progress as you wish, then press u2on the remote control to
start playing from the new position.
Repeat Highlight the icon and press OK. You can select 3 dierent modes: None to disable the function, 1to repeat one track only and
All to repeat the entire list once it is nished.
Information Highlight the icon and press OK to check the information of the playing music.
NOTE: - If one (or more) le(s) of the play list is selected, the buttons 7 8 will play only selected les.
- This menu only shows supported les.
- Files with other le extensions are not displayed, even if they are saved on the same USB storage device.
- An over-modulated mp3 le may cause some sound distortion during playback.
- This TV supports lyrics display (in English). The maximum number of characters per line is 48.
- The le name of music and lyrics must be the same in order to display lyrics while the music is playing.
- If you want to show the associated lyrics on the screen with the music, you must store these in the same folder using the
same le name with“.Irc”le extensions.
6.2.3 Browse photos
Fig.8
Press during viewing INFO or OK to display/exit from the menu bar (Fig.8). Press the USB control buttons on the remote control to do relevant
operations.
Play & Pause/Stop/Previous/Next
Press u2to play or pause the playback. Press 3to stop playing. Press 7 8 to show the previous or the next picture. Press
tuto highlight the icon on the control bar, and then press OK. The TV will response accordingly.
Repeat Highlight the icon and press OK. You can select 3 dierent modes: None to disable the function, 1to repeat one track only and
All to repeat the entire list once it is nished.
Info Highlight the button and press OK to check the information of the shown photo.
Rotate Highlight the icon in the menu bar and press OK to rotate the picture 90 degrees clockwise or counter clockwise.
Zoom In/Zoom Out Highlight the icon on the menu bar and press OK to zoom in or zoom out of the image.
Move View When the image is magnied, use this function for convenient check. Highlight this icon, press OK, then press tupq to
move the image.
NOTE: The move function is only available when the image is enlarged.
6.2.4 Browse text documents
Press tuto select Text in the main menu. Then press tuto select the drive disk you choose to watch and OK to enter. Select the le you want to
display by using pq tuand conrm with OK. Quit step by pressing OK. Press tuto select return and go back to previous menu.
6.2.5 Software update via USB
From time to time you can check if there is an improved software version available. This can be viewed and downloaded from our website www.strong.
tv. Search the model number on our website's service support section. If there is an improved software version you can download the le and copy it
to the root of a USB device. Then press pq button to select Software Update (USB) from the SETUP menu on your TV. Afterwards plug your USB device
into the USB slot and press OK to update the respective software. Conrm with Yes using tu. When the update is completed, remove the USB stick,
disconnect your device from the main power supply and plug in again.
7.0 TROUBLESHOOTING
Before calling a service technician, review following information for possible causes and solutions for the problem you are experiencing. If the TV does
not work properly after checking it, please contact your local service line or STRONG dealer. Alternatively, you can send a support mail via our website
www.strong.tv.
10

Problem Possible cause and solution
No picture,no sound 1. Check if the fuse or circuit breaker is working.
2. Plug another electrical device into the outlet to make
sure it is working or turned on.
3. The power plug is in bad contact with the outlet
4. Check the signal source.
No colour 1. Change the colour system.
2. Adjust the saturation.
3. Try another channel. Black-white programme may be
received.
The remote control
does not work
1. Change the batteries.
2. The batteries are not installed correctly.
3. Main power is not connected.
No picture, normal
sound
4. Adjust the brightness and contrast.
5. Broadcasting failure may happen.
Normal picture, no
sound
1. Press the volume up button to increase the volume.
2. The volume is set to mute, press !to restore the sound.
3. Change the sound system.
4. Broadcasting failure may happen.
Unorderly ripples on the
picture
It is usually caused by local interference, such as cars, daylight
lamps and hair driers. Adjust the antenna to minimize the
interference.
Snowy dots, blocking
and interference
If the antenna is located in the fringe area of a television signal
where the signal is weak, the picture may be marred by dots,
show blocking or break-ups. When the signal is extremely weak,
it may be necessary to install a special antenna to improve the
reception.
1. Adjust the position and orientation of the indoor/
outdoor antenna.
2. Check the connection of the antenna.
3. Fine tune the channel.
4. Try another channel. Broadcasting failure may happen.
Radio frequency
interference
This interference produces moving ripples or diagonal streaks,
and in some case, loss of contrast in the picture. Find out and
remove the radio interference source.
Playback of video is
causing picture freeze/
macro blocks or similar
distortion, especially on
HD content.
Read/write speed of your USB device could be too low. Make
sure to use a USB storage device with sucient speed and space.
Pen drives (USB sticks) may not support sucient speed.
No signal or weak
signal, intermittent
reception.
a) Cables might have loosened; moisture might have
entered into cables or connectors, heavy rain at present
or heavy storm at present.
Check the cable connections, LNB and other equipment
connected between the LNB and the receiver, or peak
the dish.
Wait for rain/storm to subside. Ask a local satellite
specialist for advice.
b) The satellite dish is not pointing at the (correct)
satellite(s).
Adjust the dish. Ask a local satellite specialist for advice.
c) Satellite dish is too small, trees or buildings in path.
Change to a larger dish or change position of dish.
d) Signal is too strong, dish is oversized.
Connect a signal attenuator to the LNB input. Ask a local
satellite specialist for advice.
Bad picture/blocking
error during heavy rain.
Heavy rain will attenuate satellite signals, below a certain level
blocking will occur.
Make sure your dish installation is up to standards to minimize
rain eects. When in doubt, ask a local satellite specialist for
advice.
11

NOTE: If the problem persists after these solutions, please contact your local support centre or send a support mail via our website
www.strong.tv.
8.0 SPECIFICATIONS
AUDIO
Audio Output: 2 x 5 W
VIDEO
Channel coverage: DVB-T2: 174 MHz-230 MHz; 470 MHz-860 MHz
DVB-C: 50-858 MHz
DVB-S2: 950 MHz-2150 MHz
System: DTV: DVB-T2, DVB-S2, DVB-C
ATV: PAL/SECAM (BG/DK/1)
AV: PAL, NTSC
CONNECTORS 32 INCH
1x ANT/CABLE IN
1x SAT IN
1x CI
2x HDMI
1x S/PDIF (OPTICAL)
1x AV IN
1x USB
1x EARPHONE
GENERAL DATA
Operating voltage: 180 ~ 240 V AC 50/60 Hz
Power consumption: 32”: max. 50 W, typ. 31 W
Power consumption in standby: 32”: <0.5 W
Operating temperature: +5 °C ~ +35 °C
Storage temperature: -15 °C ~ +45 °C
Operating humidity: 20% ~ 80% RH, non-condensing
Storage humidity: 10% ~ 90% RH, non-condensing
Dimensions (WxHxD) in mm: 32”: 732.1 x 180.6 x 483.6
Net-weight: 32“: 4.3 kg
12