Stuart Turner PH 45 ES Guide
STU�RT
Installation, Operation & Maintenance
Instructions
Please leave this instruction booklet with the owner as it contains important
warranty, maintenance and safety information
Read this manual carefully before commencing installation.
This manual covers the following products suitable for 230/1/50 supply:
PH ES Cl
PH 65 ES Cl
Pt. No. 47394
PH 75 ES Cl
PH ES Cl
- 2 –
Arabic Installation Operation & Maintenance Instructions ................... 25
English (GB) Installation Operation & Maintenance Instructions .............. 2
PRODUCT DESCRIPTION
Electric motor driven peripheral pump.
APPLICATION
The PH range of peripheral pumps are designed for pressure boosting applications in
vented stored, hot or cold, clean water systems.
Inlet pressures to the pump and ambient temperatures must not exceed the values
given in the technical specifications.
STORAGE
If this product is not to be installed immediately on receipt, ensure that it is stored in a
dry, frost and vibration free location in its original packaging.
CONTENTS Page
Checklist ...........................................................5
Important Facts – read before commencing installation ......................6
Location ............................................................7
Electrical Installation ..................................................8
Plumbing ...........................................................10
Technical Specification ................................................11
Trouble Shooting .....................................................12
Warranty ...........................................................13
- 6 –
Cont ...
1 IMPORTANT FACTS: READ BEFORE COMMENCING PUMP INSTALLATION
A Water storage capacity.
1.11 The water storage capacity must be sufficient to meet the flow rates required
by the pumped equipment and any other water using fittings and appliances,
which may be operated simultaneously. DO NOT RUN PUMP DRY.
1.12 Ensure the pump is primed as described in the priming section before
starting, damage to the shaft seal will result otherwise. See Section 4 –
Plumbing.
B Water temperature
The water entering the pump must be controlled as follows:
1.13 The maximum allowable water temperature is 60 oC.
1.14 The minimum allowable water temperature is 4 oC.
1.15 Ambient temperature: The pump must be sited in a location where the
maximum ambient temperature does not exceed 50 oC.
1.16 DO NOT fit a pump if the hot water is heated via a method whereby the water
temperature cannot be controlled, such as solar or solid fuel you must
consult the TechAssist team on +44 (0) 800 31 969 80.
C Pipework – general
1.17 Pipework design: Care should be taken in the design of pipework runs to
minimize the risk of air locks e.g. use drawn bends rather than 90obends.
1.18 DO NOT allow contact with oil or cellulose based paints, paint thinners
or strippers, acid based descalents or aggressive cleaning agents.
D Plumbing installation regulations
1.19 The plumbing installation must be installed by a qualified person and in
accordance with local regulations.
- 7 –
Cont ...
2 LOCATION GENERAL
2.11 Access: For emergencies and maintenance the pump must be
easily accessible.
2.12 Protection: The pump must be located in a dry position, frost free
and protected from freezing.
2.13 Ventilation: Ensure an adequate air flow to cool the pump.
Separate the pump from other appliances that generate heat.
An 80 mm (3 “) air gap must be maintained around the pump.
2.14 Safety: The motor casing can become very hot under normal
operating conditions. Care must be taken to ensure it cannot
be touched during operation.
2.15 Water retention: Site the pump in a location where in the unlikely
event of a water leak, any spillage is contained or routed to avoid
electrics or areas sensitive to water damage.
2.16 Pump position: The pump must be positioned on its mounting feet and as
close to the water source as possible.
2.17 Mounting foot securing: This pump is fitted with aluminium feet. If there is a
requirement to secure the pump via the feet, the following points should be
noted.
The pump should be mounted only in the horizontal position.
The mounting bolts used to secure the pump must be fitted with a plain
washer to distribute clamping load evenly across load bearing face of foot
(not supplied).
Fig. 2
PLAIN
WASHER
MOUNTING
FOOT
BOLT
Fig. 3
CAPA CITOR
L N E
230 VAC/1PH/50Hz SUPPLY
MOT O R
BLACK
BL AC K
YE LLOW
BR O WN
RED
BLUE
BL AC K
GREEN YELLOW
a
a
. 9.
✓
✓
✓
✓
7 YOUR 1 YEAR WARRANTY
+44 (0) 800 31 969 80
Cont ..
- 14 –
عبتُي
.7
.Stuart Turner
.
. Stuart Turner
.
:
.
)
.(
.
.
«(TechAssist) »
. .
+44 (0) 800 31 969 80
.
.Stuart Turner Ltd
.
- 15 –
عبتُي
. . .
.( )
.
.
. « »
.Stuart Turner
.
.( )
. .
.
. .
.
. .
. .
/
) .
.(
.6
. : 6.11
.
.5
/
/
✓
✓
✓
✓
75
(
)A
79
(
)A
74
(
)A
70
(
)A
97
72
60
40
()
73
56
29
9
50
43
18
18
43
49
47
36
0.1
1
()
1.4
14
(
)
50
1.9.5
1100
11
()
850
8.5
()
750
()
600
6
()
*
50
4
/
60
/
4.6
**
¾
1
1
1
)S1)Continuous
5
230
/
1
/
50
//
5.6
4.9
3.6
2.3
()
1240
1087
812
529
13
5
IP44
280.5
283
248
140
130
177
152
()
10.5
10.3
7.3
5.69
()
T
urn
er
S
tu
a
rt
.
*
:
.
**:.
5.11
47394
ﺮﻤﺘﺴﻤﻟا ﺊﻓﺎﻜﻤﻟا تﻮﺼﻟا ﻂﻐﺿ ىﻮﺘﺴﻣ زوﺎﺠﺘﯾ ﻻ A ﻞﺒﯿﺴﯾد 70 ﺔﺨﻀﻤﻟا ﻦﻣ ﺮﺘﻣ 1 ﺔﻓﺎﺴﻣ ﻰﻠﻋ (A) ـﻟ PH 45 ES CI ، 74 ﻞﺒﯿﺴﯾد
(A) ـﻟ PH 65 ES CI ، 79 ﻞﺒﯿﺴﯾد (A) 75 ﻲﻨﯿﺟورﺪﯿﮭﻟا سﻸﻟ ES CI ﻞﺒﯿﺴﯾد 75 و (A) ـﻟ PH 95 ES CI.
- 17 –
.4
28 : 4.11
. 22
. ( ) : 4.12
4.13
.
: 4.14
.
: 4.15
. /
!
. ( )
4.16
.
()
.
. ()
.
: 4.17
(
. (
(
: 4.18
.
10
4.6
0.5
0.5
. 6
5
6
- 18 –
عبتُي
ES CI 65PHو ES CI 45 PH أ ﺮﻬﺼﳌا:
.ES CI 95 PH ES CI 75 PH أ13
: 3.20
.1-60335 IEC
.
3.19
- 19 –
عبتُي
/ .3
. : 3.11
: 3.12
. ( )
.
. 3.13
3.14
. .
: 3.15
.
: 3.16
.
: 3.17
. :
ES CI 65 PH وES CI 45 PH
2 075 × 3 ًادو .
را( HO5SS-F رد ) 100
را
.1-60335 IEC
ES CI 95 PH وES CI 75 PH
2 100 × 3 .
60335-1. ًادو IEC
: 3.18
L N E
4 50/ 1/ 230
- 20 –
عبتُي
– .2
. : 2.11
. : 2.12
. : 2.13
.( 3) 80 .
. : 2.14
: 2.15
.
. : 2.16
. : 2.17
.
.
.( )
2
3
This manual suits for next models
7
Table of contents
Languages:
Other Stuart Turner Water Pump manuals
Stuart Turner
Stuart Turner CH 4-30 PS Guide
Stuart Turner
Stuart Turner Monsoon U1.5 bar Twin User manual
Stuart Turner
Stuart Turner MAINSBOOST iBOOST F200 Guide
Stuart Turner
Stuart Turner SHOWERMATE TP S1.5 bar Twin Guide
Stuart Turner
Stuart Turner Flomate Mains Boost 46574 Installation and operating instructions
Stuart Turner
Stuart Turner Monsoon U1.5 bar Twin Guide
Stuart Turner
Stuart Turner Wasteflo Installation and operating instructions
Stuart Turner
Stuart Turner CH 12-14 B Guide
Stuart Turner
Stuart Turner Monsoon Series Guide
Stuart Turner
Stuart Turner Monsoon Extra U1.4 bar Guide
Stuart Turner
Stuart Turner Showermate S2.6 bar Single Guide
Stuart Turner
Stuart Turner MAINSBOOST MBF Series Installation and operating instructions
Stuart Turner
Stuart Turner Monsoon Extra S1.4 bar Guide
Stuart Turner
Stuart Turner Jet 55-45 Guide
Stuart Turner
Stuart Turner CH 4-30 FL Guide
Stuart Turner
Stuart Turner 28474 User manual
Stuart Turner
Stuart Turner S2.0 bar Twin Guide
Stuart Turner
Stuart Turner ST NH PUMP 18TN Guide
Stuart Turner
Stuart Turner aquaboost ABP F120-30-1H-1 Guide
Stuart Turner
Stuart Turner techflo qt Guide
Popular Water Pump manuals by other brands
ASURITY
ASURITY FP-22 installation instructions
Polygroup
Polygroup SUMMER WAVES SKIMMERPLUS F400C owner's manual
Power Team
Power Team PE55TWP-E110 operating instructions
GÜDE
GÜDE JA 200 T 400 V Operation manual
venotec
venotec Abyzz A400 IPU operating manual
Pfeiffer Vacuum
Pfeiffer Vacuum PMP06021 operating instructions