StudioDesk VALOR User manual

VADBL VALOR STATION Gamer workstation
Pleaseassembleyourproductonsoft
surfacetoavoidscratchesanddamages
onlacquer.
!
www.studiodesk.net
FOLLOW THE LINK FOR STEP BY STEP
VIDEO ASSEMBLY MANUAL

The Desk You Deserve
Thankyou for making StudioDesk your desk of choice!
Beforebeginningassemblyofyourstand,letsgetfamiliarwiththepartsyouhavereceivedinyourpackage.
Pleasematchthecorrespondingnumbersonthispagewiththedrawings.
1.MotorizedElectriclegs
2.Desksurface
3.Setofglasses
4.Cablemanagementbar
Hardware
Parts
Tools needed (Not included)
6
LEDSET
VALOR
7
M6Screw
15pcs
4
1
Washers
Cable stripes
6 pcs
12
2 3
11
9 10
8
CUPHolder
1pc
Selfadhesive
Cableholder
Plasticcover
5OPTIONALSHELVES
x2 x2
x2 x6
OPTIONALPCTHRONE
1300mm
US EU
POWERCORD CONTROLER
7pcs 2pcs
1pc
5pcs

1 Step One
Assemblethemotorizedlegsas
perincludedmanual.
Placedesksurfacetothefloorandfix
electricplatformtousingM6screwsas
Shownontheillustrationright.
Fromthetopusehexagonlongscrewsas
shownontheillustration.
2 Step TWO
InstallMetalbridgewithM6screws.
3 Step Three
FastenbridgewithnutsandM6
screws.

4 Step Four
Turndesktostandingpositionand
Installcontrollerandmetalcap
holder.
5 Step Five
Pleasefollowourstep-by-stepvideoassembly
manualtoconnectledlightsproperly.
LEDLights
6 Step Six
Putglasscarefullyintotheplace.
TocontrolLEDlightsyou’llneedappshown
thevideoonthelinkabove.

XTCL200
Electric In Height Adjustable Desk Frame
ASSEMBLY MANUAL
Executivestandard：
GBT 33242008 <<Furniture general technical conditions>>
GBT 33252008 <<Metal furniture general technical conditions>>
EN 125212009 <<Furniture Strength, durability and safetyRequirements for domestic tables>>
Follow me
1.First check contents to make sure nothing is missing.
2.Sort out the parts and fittings as shown; assemble the product step by step.
3.It is preferable to rest the product on a soft surface to avoid damage.
4.do not tighten the screws before fully assembled. Finish with care.
5.After the installation is complete, moving products need to force to the metal stents, please do not
directly effect on the panel.
6.This product installation should be performed by adults only.
AFTER CARE
To clean metal frame using a soft cloth moistened in lukewarm soap and water .
Then buff with dry clean cloth.
Important Notice
1. Maximum load bearing 200 kg.
2. Height adjustable : 700 - 1200mm
Electric In Height Adjustable Desk Frame
2 lifting column 2 stages
Item No. XTCL200

A.Exploedview
B.PartList
1. Adjustable foot 4pc
2. Bottom 2pc
3. Height adjustable 2pc
4. Top support 2pc
5. Control Switch 1pc
6. 6Core patch cord 2pc
7. Control box 1pc
8.Power line 1pc
9. Extendable rod 2pc
10. Upper beam 2pc
11. M6×12 screw 32pc
12. ST4×16 screw 15pc
13. Ribbon 5pc
14. Allen key 1pc

C.Assembly
1.InstalltheframeworkonliftingcolumnswithAllenkey(Pic1andPic2)
2. InstallthetopsupportwithAllenkey(Pic3andPic4)
3. InstallthebottomwithAllenkey(Pic5andPic6)

4. InstalltheextendablerodtotheholeofframeandfixitwithAllenkey(Pic7andPic8)