Studiomaster DJX 325 User manual

DJX 325
3 - Channel DJ Mixer
DJX 325
GAIN
0 10
HI
-12 +12
LOW
LEVEL MID
LOW
-12 +12
-30 +12
-30 +12
HI
-30 +12
0 10
MASTER
0 10
BOOTH
0 10
INPUT 1
1
2
3
4
5
6
7
8
9
10
0
CH1
STEEP
FLAT
CF SLOPE METER
MST CUE
MIC
CROSSFADER
+3
0
-3
-8
-13
GAIN
0 10
MID
LOW
-30 +12
-30 +12
HI
-30 +12
CUE VOLUME
0 10
CUE MIX
CUE MST
INPUT 2
1
2
3
4
5
6
7
8
9
10
0
CUE SELECT
CH1 CH 2
POWER
CH2
CUE

∙ Professional 3-channel low-noise DJ mixer with state-of-the-art technology.
∙ Two Stereo channels.
∙ Microphone input with low noise, 2-band equalizer & stereo channel with 3-band equalizer.
∙ 60mm long faders.
∙ Very smooth cross-fader for utmost reliability with curve selection.
∙ 3-band kill EQ (-30 dB) and Gain control per stereo channel.
∙ Master and Booth outputs.
∙ Monitor function with master/CUE mix option.
∙ Led bargraph selectable to Master or CUE.
∙ High-quality components and exceptionally rugged construction to ensure long life.
∙ Wide mains supply voltage operation 150V-240VAC.
∙ The unit can be used for free standing or rack mounted.

3
4. Input/Output Features
Rear Panel
1.AC Inlet & Fuse Holder: Use the supplied AC cord to connect the unit to AC mains. Make sure voltage and
frequency stated on the unit matches with your local AC supply. The fuse can be accessed by the small drawer at
the AC inlet. To change the fuse, unplug the AC cord first, pull out the fuse drawer and replace the fuse ONLY with
a fuse of same voltage and rating. If the fuse blows again after replacement, hand over the unit to qualified service
personnel.
2. Switches the unit on and off.Power switch:
3. This Unbalanced Stereo RCA master output can be used to connect to an amplifier, powered
speakers etc. The output level is controlled by Master channel knob. (See Pt. 10 Front Panel)
Master RCA Output:
4. This unbalanced stereo RCA can be used to connect a personal monitor in the DJ booth.
The output level is controlled by the booth output rotary control. (See Pt. 11 Front Panel)
Booth Stereo Output:
5. These RCA connectors provide inputs for line-level signals from CD Players,
Tape Decks, DVD players etc.
Line Inputs: MP3 players, iPod’s,
6. This 1/4” Stereo jack socket input is provided to connect a microphone using a Balanced cable.Mic Input:
1 2 3 4 6 5

1. This 2-Band equalizer is provided for the microphone input. It has a range of -12/+12dB.Microphone Equalizer:
2. This knob is used to set the gain level of the connected microphone.MIC Level:
4. This switch is used to choose the slope of the Crossfader slope between a flat & steep.CF slope:
5. A high-grade dual rail 45mm fader determines the mix ratio between the stereo signals assigned to its
left CH1 and right CH2 sides. (See Pt. 5 Front Panel)
Crossfader:
DJX 325
GAIN
0 10
HI
-12 +12
LEVEL MID
-30 +12
LOW
-30 +12
HI
-30 +12
GAIN
0 10
MID
-30 +12
LOW
-30 +12
HI
-30 +12
MASTER
0 10
BOOTH
0 10
CUE MIX
CUE MST
INPUT 1
1
2
3
4
5
6
7
8
9
10
0
INPUT 2
CH1
CUE SELECT
CH1 CH 2
STEEP
FLAT
CF SLOPE METER
MST CUE
MIC
CROSSFADER
CUE VOLUME
0 10
POWER
LOW
-12 +12
CH2
CUE
+3
0
-3
-8
-13
0 10
1
2
4
3
5 6
7
8
9
16
14
11
10
13
12
15

16. Indicates whether the unit is ON or OFF.Power:
CUE Select Switch: This switch selects CH1 or CH2 CUE signal to headphone.
Mix Control:CUE Mix is set to CUE then headphone signal shall be CUE out by mean of cue selection (8)
& it is set to master (MST) then headphone signal is mix master out.
CUE
10.
11.
12. Displays the master or Cue signal depending on selection by switch (13).Level Meter:
13. To select MASTER or CUE signal.Meter selection switch:
14.
Equalizer: This 3-Band equalizer is provided for the music channel. It has a range of -30/+12dB.
15.
6. Some Basic Tips
9. Finally, Practice Practice Practice is the golden rule to get a great mix.
1. Find Tempo/BPM of the song to be mixed.
2. Beat matching is the most important factor in mixing. Try to master this art. (The most commonly used beat currently
is the 4/4 Structure.
3. Learn to mix with the up faders first and than proceed to the crossfader.
4. Use the CUE feature on the DJ mixer to listen to the next track before it is being introduced into the mix.
5. Make sure you listen to all new & old genres of music, as this may give you your next creative spark.
6. Make sure that the Gain & EQ settings on both the channels match. This will help you get a great sounding mix.
7. Make sure you learn all the features on you Studiomaster Professional DJ Series Mixer this will help you take your
Mix to another level.
8. Practice your set before any major gig.
9.
Level Control: This knob is used to control the listening volume for the headphones.CUE

Max. 10VA
204 x 272 x 60 mm
60 mm
- - - - Kg
> 82dB (Line)
<0.07% @ 1 KHz
< 55dB @ 1.0KHz (Line)
20Hz - 22KHz (-3dB)
T 500mA/250V
57 dB Gain
0 dB Gain
+18 dB
+18 dB
+12 dB/-29 dB @ 50Hz
+12 dB/--24 dB @ 1.3KHz
+10 dB/-12 dB @ 10KHz
+12 dB/-12 dB @ 70Hz
+12 dB/-12 dB @ 10KHz
150V-240V AC, 50Hz
8.

REV.000/SM DJX325/APRIL 2013
A1/A2, Giriraj Industrial Estate, Mahakali Caves Road, Andheri (East), Mumbai - 400 093. India Tel.: 022 - 42869000 / 01 / 308807776 /
66916832 Fax: [phone] E [email protected] W www.audioplus-india.com/www.studiomasterprofessional.com