STYLE OMesh-L User manual

NSW VIC QLD HONG KONG CHINA
»PARTS »STEPS
»STEP 4
»FINISH
»STEP 5
A
B
C
D
E
F
H
G
I
J
K
L
M
CASTOR X 5
BASE X 1
GAS LIFT X 1
SEAT WITH
MECHANISM X 1
ARM X 2
BACK X 1
BACKREST
BELLOW X 1
ARM KNOB X 2
BACKREST
POST X 1
BACKREST
POST BOLTX 1
BACK BOLT X 1
BELLOW SCREW
X 2
ALLEN KEY X 1
»USE this product only for seating one person at a time.
»DO NOT use this chair as a step stool/ladder.
»DO NOT sit on any part of the chair except the seat.
»DO NOT use chair on uneven oor surfaces.
»DO NOT use chair unless all bolts, screws are tight.
At least every 6 months check all bolts, screws to be sure they are tight.
IF ANY PARTS ARE MISSING, BROKEN, DAMAGED OR WORN, STOP USE OF THE
PRODUCT UNTIL REPAIRS ARE MADE USING FACTORY AUTHORIZED PARTS.
FAILURE TO FOLLOW THESE WARNINGS COULD RESULT IN SERIOUS INJURY.
PREVENTIVE MAINTENANCE AND WARNING
1. Pull out
the tail
2. Insert I
into the
hole
1. Insert E
into the
basket
2. Tighten G into the
Oval shape hole
»ASSEMBLY INSTRUCTIONS
B
C
A
G
E
F
J
M
I
D
H
L
K
»STEP 1
»STEP 2
»STEP 3

NSW VIC QLD HONG KONG CHINA
»Vacuum regular
»Regularly adjust mechanism angle
»Regularly adjust gas height
»All warranty claims to be forwarded to place of purchase
»Warranty covers components and workmanship only
»Damage or wear and tear not covered by warranty
»Misuse or abuse will not be covered under warranty
RIGHT FRONT LEVER
To adjust seat height
RIGHT BACK LEVER
To adjust back angle
ADJUSTABLE ARMS
To adjust back height
hold back with two hands
while seated and raise to
desired height
To lower the back height
raise back all the way to
the top and release slowly
700MM ALUMINIUM 5 STAR BASE WITH CASTORS
Use soft tyred castors for tiles
Use hard tyred castors for carpet
RIGHT BACK KNOB
To adjust seat depth
(seat slider)
RIGHT MIDDLE LEVER
To adjust seat angle
X Do not use as a step ladder
INDOOR USE ONLY
INSTRUCTIONS OF USE