Officeworks J.BURROWS JBRAPTPRBK User manual

TYPHOON ELITE GAMING HIGH BACK CHAIR
ASSEMBLY
INSTRUCTIONS
JBRAPTPRBK
1/10
Weight capacity:160kg
1 CTN
thgirypocottcejbussitelkoobnoitcurtsni&ngisedsihT
www.officeworks.com.au

2/10
Furniture Assembly Instructions S
tyle Guide
Estimated Assembly Time: 30 minutes
Assembly Video
Customer Service Contact Details
Spare Parts & Hardware
1300 OFFICE
People Required
General Advice
To view an assembly video, go to https://www.officeworks.com.au/
Search the product by item code or name:
Click on the icon to watch the video.

3/10
CHILDREN MUSTBE SUPERVISED.
Officeworks Ltd. | 236-262 East Boundary Road | Bentleigh East VIC 3165 | AUSTRALIA
NOTE
•Please check you have all hardware before assembling.
•If you are missing any hardware, please contact 1300 OFFICE.
•Please contact Mister Fixit for spare or missing keys at [email protected] or call
1800 234 800
Please ensure you have the name of the item, required hardware part and quantity.
Please retain your receipt as proof of purchase to validate your warranty.
•
•
CAUTION
•Do not tighten screws before all screws are in the right place.
•Do not use this product unless all bolts and screws are firmly secured.
•Check that all bolts and screws are securely tightened at least every 4 months.
WARNING
•If parts are missing, broken, damaged or worn, stop using the product until all repairs
are made using manufacturer authorised parts.
•Failure to follow these warnings could result in serious injury.
DANGER
•

Parts List
M5*12mm
Hardware List
4/10
30mm
AX1
DX1
DX1
EX1
EX1
GX5
GX5
HX1
JX1
KX8 LX8 MX4
NX1
IX1
FX1
BX1 CX2
CX2
Hardware Spare Parts number - HWRAPTPRHW
Spare Parts number -
HWRAPTPRGL HWRAPTPRBS HWRAPTPRCA HWRAPTPRAR

Kx2
Kx2
Nx1
Step 1
Step 2
5/10
H
E
F
B
A
G

M5*12mm
Step 3
Step 4
6/10
K*2
K*2
M*2
M*2
M8*25mm
N*1

M5*12mm
M8*30mm
Lx8
Lx4
Lx4
C(R) C(L)
Step 5
Step 6
7/10
JM*2 MX2
NX1
NX1
FRONT

Kx4
NX1
KX4
M8*25mm
D
Step 8
Step 7
8/10
FRONT

9/10
While seated, reach under the right side of the chair
to find the height adjustment handle.
Pull the handle all the way out (away from the gas lift)
to allow the seat to tilt back or forth. To lock the seat
in the upright or vertical position, sit upright & push
the handle in towards the gas lift.
Seat Tilt
Sitting in the chair pull lever up.
Move your upper body back &
forth to a comfortable position.
When comfortable lock the
position by pushing the lever
down.
Back Tilt
To increase chair height pull
lever upward while lifting body
weight slightly off the seat.
Release lever at desired height.
To lower chair height sit fully into
the chair & pull lever upward.
Chair Height Adjustment
Release lever at desired height.
Your feet should be resting flat on
the floor.
Arm Pad Swivel
Pull lever up whilst moving the
arm up or down. Release lever
at desired height.
Arm Height Adjustment
Turn continuously to adjust how
quickly chair tilts back & forth.
Adjustable Tilt Tension Control
Note: if adjusting while sitting in chair
Turn knob left to tighten tension.
Turn knob right to loosen tension.
Care Instructions - PU Chairs
Wipe with a damp cloth & mild soap. Wipe dry immediately with an absorbent drycloth.
Treat spills immediately with an absorbent cloth by blotting the spill.
Do not use detergents, solvents or abrasive cleaners.
Avoid contact with skin, in particular during high temperatures & humidity.
Clean, check & tighten all parts regularly.

10/10
Thank you for your purchase. Please retain your receipt to validate warranty. If you would like
to know more about our furniture products,
please visit www.officeworks.com.au
Officeworks Ltd warrants that this product will be free from defects and work as
intended for 3 years from the date of purchase by the original customer.
If the product has any defects or does not work as intended during the Warranty Period,
Officeworks will, at its election and at its expense, repair or replace the product.
This warranty does not apply:
•
To cosmetic damage;
To damage caused by consumables used in connection with the product (such as
•
cleaning products);
Where the product has not been used in accordance with all provided instructions;
•
To damage arising from fair wear and tear;
•
Where the product has not been subject to reasonable use;
•
Where the product has been intentionally or negligently damaged; and/or
•
if the customer has attempted to repair the product.
To make a claim under this warranty, please return your product with your receipt or
proof of purchase to your nearest Officeworks store or contact 1300 633 423.
This warranty is provided in addition to any rights you may be entitled to under the
Competitions & Consumer Act 2010.
Our goods come with guarantees that cannot be excluded under the Australian
Consumer Law. You are entitled to a replacement or refund for a major failure and
compensation for any other reasonably foreseeable loss or damage. You are also
entitled to have the goods repaired or replaced if the goods fail to be of acceptable
quality and the failure does not amount to a major failure.
8