Coaster 315701F User manual

ASSEMBLY INSTRUCTIONS
COASTER FINE FURNITURE
315701F (B1-B3)
FULL BED
www.coastercompany.com
PAGE 1 OF 4 REVISION 0: 05/15/2018

ITEM: 315701F(B1-B3)
PARTS IDENTIFICATION
AHEADBOARD PANEL 1 PC
BLEFT HEADBOARD LEG 1 PC
DFOOTBOARD
EBED RAIL
FBED SLAT
CRIGHT HEADBOARD LEG 1 PC
GBED SLAT SUPPORT
WITH LEVELER
PART NAME FIGURE QTY
B2 (BOX 2)
B1(BOX 1)
B3 (BOX 3)
HB
ASSEMBLY INSTRUCTIONS
PAGE 2 OF 4
www.coastercompany.com
315701F(B1)
FROM BOX 1
HEADBOARD COMPLETE
315701F(B2)
FROM BOX 2
FOOTBOARD
Warning!
1. Remove hardware from box and sort by size.
2. Please check to see that all hardware and parts are present prior to start of assembly.
3. Please follow attached instructions in the same sequence as numbered to assure fast & easy assembly.
2. This product is for home use only and not intended for commercial establishments.
1. Don't attempt to repair or modify parts that are broken or defective. Please contact the
store immediately.
ASSEMBLY TIPS:
10 MINUTES
ASSEMBLY TIME
1 PC
1 PC
1 PC
2 PCS
4 PCS
4 PCS
D

ITEM:
HARDWARE IDENTIFICATION
HARDWARE NAME FIGURE QTY
Z-B1(BOX 1) - Hardware pack is located in 315701F(B1)
BOLT
(5/16" x 38mm - GD)
LOCK WASHER
(5/16" - GD)
FLAT WASHER
(5/16" x 19 x 1.5mm - GD)
ALLEN WRENCH
(4mm - GD)
6 PCS
6 PCS
6 PCS
1 PC
THREADED BOLT
U-SQUARE WASHER
HEX NUT
WRENCH
SCREW
(5/16" x 75mm - GD)
(25 x 15 x 2mm - GD)
(5/16" x 17mm- GD)
(13mm - GD)
(4 x 25mm - GD)
8 PCS
8 PCS
8 PCS
1 PC
8 PCS
1
2
3
4
5
6
7
8
9
Z-B3 (BOX 3) - Hardware pack is located in 315701F(B3)
315701F(B1-B3) ASSEMBLY INSTRUCTIONS
Warning!
1. Remove hardware from box and sort by size.
2. Please check to see that all hardware and parts are present prior to start of assembly.
3. Please follow attached instructions in the same sequence as numbered to assure fast & easy assembly.
2. This product is for home use only and not intended for commercial establishments.
1. Don't attempt to repair or modify parts that are broken or defective. Please contact the
store immediately.
ASSEMBLY TIPS:
NOTE: PHILLIPS HEAD SCREW DRIVER IS REQUIRED IN THE ASSEMBLY PROCESS;
HOWEVER, MANUFACTURER DOES NOT PROVIDE THIS ITEM.
PAGE 3 OF 4
www.coastercompany.com

ITEM:
3
1
4
B
5
F
COMPLETE
315701F(B1-B3) ASSEMBLY INSTRUCTIONS
www.coastercompany.com
PAGE 4 OF 4
315701F (B1) - BOX 1 315701F (B1-B3) - BOX 1 TO BOX 3
STEP 1 STEP 2
STEP 3 STEP 4
STEP 5