Styleworks LONDON-HB SW-60500 User manual

OPERATING INSTRUCTIONS
Please check all components are included prior to assembling.
For assistance call (833) 265 - 5177
Function Instruction - 1
To Adjust Seat Height:
While seated, lean forward and reach under the right side of
the chair to nd the handle. Lift the handle and raise your
body up slightly to allow the chair to rise to the desired
height. Once desired height is reached, release handle to lock
chair at desired height. To lower the seat, lift the handle
while seated. The chair will descend until the handle is
released or the chair reaches the bottom position.
LONDON-HB
SW-60500
Function Instruction - 3
To Adjust Tension on the Tilt:
Reach under the front center of the chair, grasp the round
knob (R) and turn it counter- clockwise to stiffen the tilt
mechanism fora heavier user.Turn the knob (R) clockwise
to loosen the tilt mechanism fora lighter user. Rotate the
knob (R) until the desired resistance is reached.
PG 1/3
Function Instruction - 4
To Adjust Seat Depth:
Reach under the right side of the chair to nd the handle.
Lift the handle and adjust the seat depth short enough to
enable your legs to move freely under the chair. To adjust
seat depth, lift the handle and slide the seat into the
preferred position. Located desired position and release
handle to lock.
R
Function Instruction - 2
To OperateTilt Lockout:
While seated, reach under the right side of the chair to nd
the height-adjustment handle. Pull the handle all the way out
(away from the gas lift) to allow the chair to tilt backwards.
To lock the chair in the upright or vertical position, sit upright
and push the handle in towards the gas lift.

OPERATING INSTRUCTIONS
Please check all components are included prior to assembling.
For assistance call (833) 265 - 5177
PG 2/3
Function Instruction - 5
To Adjust Arm Height:
Press the buttons under the armpads to move them up or
down freely then release the buttons once the desired
height is reached.
Function Instruction - 6
To Adjust Armrests angle:
While seated, grasp front end of armrests and pivot them
to the left or right. Adjusting arm angle can help support
different types of work and shifts in posture.
Function Instruction - 7
To Adjust Armrests forward and backward:
While seated, grasp the armrests and push them forward
or backward to a desired position.
Function Instruction - 8
To Adjust Armrests Width:
While seated, hold and push the armrests outwards or
inwards into a desired width of arms.
LONDON-HB
SW-60500

OPERATING INSTRUCTIONS
Please check all components are included prior to assembling.
For assistance call (833) 265 - 5177
Function Instruction - 9
To Adjust Lumber Support Height:
Lumber support height adjust independently for the short
and tall.
Function Instruction - 10
To Adjust Headrest Height & Radian:
Headrest height adjust independently for the short and
tall. Swivel up and down for optimum neck comfort.
Function Instruction - 11
360˚ Swivel:
360˚ seat swivel.
PG 3/3
LONDON-HB
SW-60500